The ILED-OL-A E27 is the oyster ceiling light stripped back to what lasts: an aluminium body, a PMMA diffuser and a standard E27 bulb base. There is no LED module, no driver and no sensor built into it \u2014 you supply the bulb, which means the brightness, the colour temperature and the upgrade path all belong to you rather than to the fixture.<\/p>\n
Any E27 lamp works in this fitting: an LED bulb for efficiency, a warm 2700K lamp for a bedroom, a bright 4000K for a kitchen, or a smart bulb if the room is on an app. When the bulb industry moves on, you change the bulb and keep the fixture \u2014 which is the whole point of a base-lamp design. The specification carries no bulb, so there is no factory colour temperature to settle for and nothing to go obsolete inside the housing. For a building that is fitted out once and maintained for decades, that division of labour is the practical one: the fixture handles the weather, the wiring and the optics, and the lamp technology keeps improving on its own.<\/p>\n
The body is aluminium with a PMMA diffuser, painted white, measuring \u03c6325\u00d798mm, and spreading a 120-degree beam across the room. It is a surface mount: the base fixes to the ceiling, the wiring lands on the terminal block, and a quick connector makes the bulb change a one-hand job. Class I wired, so the circuit needs a protective earth. At \u03c6325mm across and 98mm deep it sits close to the ceiling, and the diffuser softens whatever lamp is fitted \u2014 a clear bulb stops glaring, a frosted bulb spreads a little further.<\/p>\n
The bulb sits in a quick connector rather than a screw-down holder, so a change is a quarter-turn with one hand \u2014 reachable from a step stool without tools. That sounds like a small thing until you count the bulb changes a corridor of fittings collects over ten years, or try to do the last one with the old bayonet style welded in by heat and time.<\/p>\n
The rating is IP42 \u2014 an indoor ceiling fitting, protected against dripping water and solid objects. That covers bedrooms, living rooms, hallways, home offices and covered entryways; bathrooms and outdoor ceilings need a higher-rated fitting. It runs on 110-240VAC at 50\/60Hz, which covers both regional supplies on one SKU. Being Class I, the circuit carries a protective earth and the terminal block lands it properly inside the base \u2014 the fitting is simple, but it is not a shortcut on the wiring.<\/p>\n
Rental and social housing is the natural home for this design: the landlord fits the fixture once, and tenants change bulbs as they please without touching the wiring. Between tenancies there is nothing to re-program and no proprietary lamp to source \u2014 the outgoing tenant takes their bulbs and the next one fits their own. Hotels and offices use it in back-of-house corridors where a standard lamp is all the room needs. Kitchens and home offices take brighter lamps, bedrooms take warmer ones, and the fixture stays out of the decision. Facility teams like it for the same reason: when a lamp fails, the fix is stocked in every hardware aisle, and there is no module to order from a catalogue.<\/p>\n
The ILED-OL-A E27 carries CE, RoHS, SAA and TUV certification. The warranty is five years on the fixture itself. There are no electronics inside to fail \u2014 the maintenance routine is the bulb change, and the diffuser wipe that comes with any ceiling fitting. The TUV mark behind the CE, RoHS and SAA paperwork also covers the fixture side of the safety case: the housing, the terminal block and the base, which is the part that stays on the ceiling long after any bulb is gone.<\/p>","protected":false},"excerpt":{"rendered":"
La ILED-OL-A E27 es una l\u00e1mpara de techo tipo \u00aboyster\u00bb dise\u00f1ada en torno a un casquillo est\u00e1ndar E27: no incluye bombilla, no tiene controlador integrado que pueda fallar y su temperatura de color no viene fijada de f\u00e1brica. T\u00fa eliges la bombilla E27 y la cambias cuando la estancia necesite una luz diferente. El cuerpo de aluminio con difusor de PMMA mide \u03c6325\u00d798 mm en color blanco, proyecta un haz de 120 grados y cuenta con la clasificaci\u00f3n IP42 para techos interiores. Funciona con 110-240 V CA, cableado de Clase I, y cuenta con un conector r\u00e1pido para el cambio de bombilla. Certificado seg\u00fan las normas CE, RoHS, SAA y T\u00dcV, con cinco a\u00f1os de garant\u00eda.<\/p>","protected":false},"featured_media":13365,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,146],"product_tag":[249,294,295],"class_list":["post-13752","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-ceiling-light","product_tag-aluminum","product_tag-area-lighting","product_tag-commercial-lighting","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/product\/13752","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/comments?post=13752"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/media\/13365"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/media?parent=13752"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/product_brand?post=13752"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/product_cat?post=13752"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/es\/wp-json\/wp\/v2\/product_tag?post=13752"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}