IP65 LED Ceiling Light 4 Entry 3CCT Waterproof

The ILED-OL-A D is a waterproof recessed ceiling light built for damp and wet locations. Three wattage options—18W, 24W, and 30W—each deliver 120LM/W with PC body and PC diffuser in white finish. Input voltage covers 220-240VAC or 110-277VAC, and the 3CCT driver lets you pick 3000K warm, 4000K neutral, or 6000K cool white at install. Four cable entries make wiring multiple fixtures simple.

Three sizes, one design

The series comes in three sizes that share the same IP65 housing and driver design, differing only in diameter and output. The 18W model is the compact option at D260×95mm for smaller rooms; the 24W steps up to D320×100mm for mid-size spaces; the 30W tops the range at D360×110mm for larger areas. All three run at 120 lumens per watt, hold CRI above 80, and keep the power factor above 0.9. Behind the PC diffuser the output spreads in a wide, even pattern, which is what you want from a general ambient ceiling fixture rather than a narrow directional one.

The ILED-OL-A18W D runs 18W, delivers 2160 lumens, and fits a D260×95mm ceiling opening. The ILED-OL-A24W D pushes 24W and 2880 lumens from a D320×100mm housing. The ILED-OL-A30W D tops out at 30W and 3600 lumens from a D360×110mm frame. All three use LM80-certified LEDs, maintain CRI >80, and draw power factor above 0.9.

IP65 build for wet spaces

The PC body and matching PC diffuser seal the LED modules from dust and water jets from any direction. That IP65 rating means the fixture handles bathroom steam, covered patio rain, and industrial washdown without corrosion—conditions where metal housings often degrade over time.

Four cable entry ports run along the base ring. They let you wire several fixtures from a single junction box in a daisy-chain layout, reducing conduit runs and hidden wiring. Both surface-mounted and recessed installations work—the cutout diameter matches the model size: 260mm for the 18W, 320mm for the 24W, and 360mm for the 30W.

3CCT colour selection

The 3CCT (Tri Color Changeable) driver has a physical switch on the unit itself. Before powering the fixture for the first time, set the switch to your preferred colour temperature—3000K warm white, 4000K neutral white, or 6000K cool white. Once set, the colour stays fixed until you change the switch again. All three modes maintain CRI >80 so colours appear natural rather than washed out. This is useful when a space serves two purposes—warm light for a living area, cool light for task work.

What is in the box

Each unit ships as a complete fixture including the sealed driver, PC diffuser, and mounting clips. No separate transformer is needed for basic operation.

What you need to supply

A standard ceiling cutout matching the model diameter (260mm, 320mm, or 360mm). For recessed installation, the plenum depth must accommodate the housing height: 95mm for the 18W, 100mm for the 24W, and 110mm for the 30W. Standard wiring tools and a voltage tester. A licensed electrician for damp-location hardwiring per local code.

Optional features

DALI dimming, 0-10V dimming, motion sensors, and emergency backup kits are available as factory options. They are selected at order time and cannot be added later. DALI and 0-10V connect to building automation systems for scheduled or sensor-triggered control. Motion sensors activate the light automatically in corridors and storage areas. Emergency backup provides battery-backed illumination during power failures—professional wiring is recommended for the emergency circuit, and backup duration depends on the specific kit chosen.

Certifications and warranty

SAA, CE, and RoHS certifications confirm compliance with safety and environmental standards. Warranty is 3-5 years depending on the configuration—verify the exact term with your supplier at the time of order.

Maintenance

Wipe the PC diffuser with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners, which can cloud the material. The sealed driver does not require user servicing. Replace the entire fixture if the driver fails rather than attempting field repair.

Where it gets used

Bathrooms and wet rooms where steam and splashes challenge standard fixtures. Covered patios and balconies exposed to rain and humidity. Commercial garages and workshops with voltage fluctuations and vibration. Hotel corridors and common areas where DALI zone control reduces energy waste. Laundromats and pool rooms where constant moisture demands IP65-rated equipment throughout the year.

Buyers choose the IP65 LED Ceiling Light ILED-OL-A D series for these reasons:

IP65 waterproof protection. The PC body and diffuser resist corrosion in humid environments. Suitable for bathrooms, covered patios, and industrial washdown areas. Backed by a 3-5 year warranty.

3CCT selectable color temperature. One fixture, three color temperatures—3000K warm, 4000K neutral, 6000K cool—set with a simple switch. No need to purchase separate fixtures for different lighting needs.

Four cable entries. Simplifies wiring and allows daisy-chaining multiple units from a single connection point. Supports both surface and recessed mounting across 110-277VAC worldwide.

120LM/W with CRI >80. High lumen output per watt and accurate color rendering across all three color temperature modes. No UV or IR emissions. SAA/CE/ROHS certified. PF >0.9.

Factory-configured options. DALI dimming, 0-10V dimming, motion sensors, and emergency backup are available at order. They cannot be retrofitted after purchase, so specify all requirements upfront.

Consistent build across all models. Every variant in the ILED-OL-A D series uses the same PC housing, IP65 rating, and LM80-certified LEDs—only the size and lumen output change between the 18W, 24W, and 30W options.

Bathrooms and Wet Rooms: The IP65 waterproofing handles steam and splashes. Switch from 3000K warm for a relaxing atmosphere to 6000K cool for grooming tasks. The 18W model is well-suited for compact bathrooms up to about 10 square meters.

Covered Patios and Balconies: Mount under eaves or soffits. The 30W model delivers 3600LM for larger outdoor entertaining areas. Multiple fixtures can be daisy-chained through the four cable entries for uniform lighting along a walkway or deck.

Kitchens and Utility Rooms: CRI >80 renders food colors accurately under task lighting. The 24W model provides bright, even light over counters and work surfaces. Optional dimming lets you adjust brightness for cooking versus cleaning.

Commercial Garages and Workshops: The shock-resistant PC housing endures vibration from tools and vehicles. Wide voltage support (110-277VAC) handles voltage fluctuations common in workshop environments. Emergency backup ensures safe egress during power failures.

Hotel Corridors and Common Areas: DALI integration enables zone-based lighting control. The slim round profile blends into suspended or concrete ceilings. Motion sensor options reduce energy waste in low-traffic sections.

Laundromats and Pool Rooms: High humidity and constant moisture challenge standard fixtures. The IP65 rating and PC construction handle the environment without corrosion.

Before ordering, check the following:

Power and model selection. Choose 18W for small bathrooms, 24W for medium kitchens, and 30W for larger patios. Each model has a different cutout size—confirm your ceiling opening matches the diameter (260mm, 320mm, or 360mm).

Mounting type. Decide surface mount or recessed mount. The four cable entries work for both. Recessed installation requires a ceiling cutout matching the model diameter. Surface mount needs a flat ceiling plane.

Input voltage. This fixture accepts 220-240VAC or 110-277VAC. Confirm your site voltage before ordering to ensure compatibility with your local supply.

Optional features. DALI dimming, 0-10V dimming, motion sensors, and emergency backup are factory-selected. They cannot be added after purchase. Specify all options at order time.

Installation tip. Set the 3CCT switch before powering on for the first time. It is easier at a workbench than on a ladder.

Warranty. Keep your purchase receipt. The warranty period (3-5 years) begins from the date of purchase. Some regions may require product registration within 30 days.