ILED-FX-5050 RGB ialah jalur LED RGB warna statik yang dibina\u56f4\u7ed5 paket SMD 5050 yang terbukti \u2014 pemegang 5.0 mm \u00d7 5.0 mm yang mengandungi cip LED merah, hijau, dan biru yang berasingan. Ia menghasilkan kesan warna dinamik dengan mencampurkan saluran tiga ini pada keparahan yang boleh pelaraskan. Berbeza dengan jalur kebolehubahsai seperti WS2812B, keseluruhan jalur berubah warna sebagai satu unit. Satu pengawal menguruskan larian keseluruhan, yang mempenjagawayiran mudah dan mengurangkan kos.<\/p>\n
FX-5050 RGB hadir dalam empat varian kepekatan LED. Model 30 LED\/m menarik 7.2 W\/m dan merupakan pilihan paling ekonomis untuk larian panjang di mana kecerahan mutlak tidak kritikal. Model 48 LED\/m berada pada 11.5 W\/m dan menawarkan titik tengah. Model 60 LED\/m memberikan 14.4 W\/m untuk aplikasi yang memerlukan output warna yang lebih kuat. Model 120 LED\/m menolak 28.8 W\/m dan menyediakan output paling cerah, tetapi ia khusus 24VDC dan menggunakan PCB yang lebih lebar 13.5 mm.<\/p>\n
Semua model berkongsi sudut pancaran 120\u00b0 yang sama dan dipotong setiap 25 mm. Model kepekatan rendah menggunakan PCB 10 mm; model 120 LED\/m menggunakan 13.5 mm. Gulungan standard 5m; panjang khas tersedia.<\/p>\n
The strip is mounted on a flexible printed circuit with 3M adhesive backing. The standard backing is yellow 3M tape; red 3M tape is available as an option for applications where the colour of the adhesive matters. Copper traces run along the length of the PCB, and each cut point exposes solder pads for joining sections or attaching connector cables.<\/p>\n
Installation is straightforward. Peel back the adhesive backing, position the strip, and press into place. Connect the 15 cm input cable to a compatible RGB controller and power supply. If multiple strips are joined end-to-end, use the appropriate connector or solder the copper pads and insulate with heat-shrink tubing. The 30\/48\/60 models accept either 12VDC or 24VDC input; the 120 LEDs\/m model requires 24VDC.<\/p>\n
Four IP ratings cover the range from dry indoor use to continuous underwater immersion. IP20 has no coating and is suited to protected indoor coves and shelving. IP65 adds a silicone cover that protects against water jets \u2014 suitable for covered outdoor areas such as fascia lighting and awning edges. IP67 allows temporary submersion and is used for pool and fountain installations. IP68 is rated for continuous submersion and is the choice for permanent underwater fixtures. Do not mix IP variants on the same run \u2014 the connector types differ and cannot be sealed together.<\/p>\n
The ILED-FX-5050 RGB works with any standard 3-channel PWM RGB controller. The controller must match your strip voltage \u2014 12VDC controllers work with the 30\/48\/60 models; 24VDC controllers are required for the 120 LEDs\/m model. Most budget RGB controllers offer colour wheels, dimming, and basic scene presets. No DMX, ArtNet, or SPI protocol is needed \u2014 this is a simple plug-and-play RGB strip.<\/p>\n
Each order ships as a 5-metre roll (or custom length if specified) with the 15 cm input cable pre-attached. The roll is wound onto a plastic spool for shipping. No controller or power supply is included.<\/p>\n
To complete the installation you will need: a 3-channel PWM RGB controller compatible with your chosen voltage (12VDC or 24VDC), a power supply rated for the total wattage of the strip plus 20% headroom, and connector cables or soldering materials if you are joining multiple sections. For outdoor installations, also plan for waterproof connector seals at every joint.<\/p>\n
Residential ambient and accent lighting is the most common application. The FX-5050 RGB is installed in ceiling coves, under-shelf cavities, and behind TV units to create mood lighting that shifts with the time of day or the occasion. Retail displays use the strip for colour-wash effects that draw attention to products and seasonal promotions. Bars, clubs, and hospitality venues rely on the full RGB spectrum to set atmosphere quickly across a single zone. Architectural outline lighting uses the bendable PCB to trace building edges, windows, and rooflines \u2014 IP65 and above variants for exterior use. Holiday and event decoration takes advantage of the easy cut-and-join design to create temporary installations.<\/p>\n
The ILED-FX-5050 RGB is rated for 50,000 hours of operation. At 12 hours per day of use, that works out to roughly 11.4 years before light output drops to 70% of initial brightness (L70 standard). The 5050 SMD package is a mature technology with established thermal management \u2014 the copper PCB acts as a heat spreader, and no active cooling is required. The limiting factor for lifespan is usually the adhesive losing grip or the silicone degrading under UV, not the LEDs themselves. Choose IP65 or above for outdoor use.<\/p>","protected":false},"excerpt":{"rendered":"
ILED-FX-5050 RGB ialah jalur LED RGB statik SMD 5050 yang memberikan basahan warna cerah dan jenuh merentasi satu zon. Empat pilihan kepekatan \u2014 30, 48, 60, dan 120 LED per meter \u2014 membolehkan anda memilih antara kecekapan dan output maksimum. Model 30\/48\/60 berfungsi pada 12VDC atau 24VDC; model 120 LED\/m adalah khusus 24VDC. Tercapai dalam penilaian IP20, IP65, IP67, dan IP68. Gulungan standard 5m dipotong setiap 25 mm pada PCB 10 mm atau 13.5 mm.<\/p>","protected":false},"featured_media":14055,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[156,158],"product_tag":[308,296],"class_list":["post-14054","product","type-product","status-publish","has-post-thumbnail","product_cat-smd-led-strip-light","product_cat-strip-and-module-lights","product_tag-rgb","product_tag-tape","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/product\/14054","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/comments?post=14054"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/media\/14055"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/media?parent=14054"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/product_brand?post=14054"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/product_cat?post=14054"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ms\/wp-json\/wp\/v2\/product_tag?post=14054"}],"curies":[{"name":"wp < ' ' > < >","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}