The ILED-PL6060-A<\/strong> is a slim 40W LED panel light in the standard 595 \u00d7 595mm ceiling tile format. It produces 4000 lumens at 100\u2013110 lumens per watt from an edge-lit LM80 LED source, drawing power from 220\u2013240VAC or 110\u2013277VAC with a power factor above 0.9. The housing is 11mm thick with an aluminum body finished in white or silver, and the diffuser is a non-yellowing PMMA plate that spreads light across a 120\u00b0 beam angle. UGR is 22 as standard, with an optional UGR below 19 glare-control version available. The CCT switch lets you choose between 2800K warm white and 6500K cool white at installation \u2014 all variants maintain CRI above 80.<\/p>\n The edge-lit design uses a PMMA light guide plate to spread light uniformly across the full panel surface. Light from the perimeter LEDs travels through the guide plate and exits through micro-structures printed on the plate surface, creating even brightness with no visible hot spots or dark zones. The 120\u00b0 beam angle covers a broad area without needing multiple overlapping fixtures. A prismatic or frosted diffuser option is available if further softening of the light output is desired.<\/p>\n The flicker-free driver protects against eye strain during extended use in offices or classrooms. The 3CCT switch inside the driver lets you set the colour temperature once at installation \u2014 warm white for hospitality and residential spaces, neutral white for offices, or cool white for task-oriented environments. All three settings maintain CRI above 80 so colours in the space render naturally without appearing washed out or overly saturated.<\/p>\n Two functions are integrated into a single driver: DALI-2 dimming and emergency battery backup. The DALI two-wire interface connects directly to any DALI bus \u2014 no separate dimmer module or protocol gateway required. Set scenes, schedule on\/off times, and group-control panels from a central building management system. The emergency battery activates automatically when mains power fails, maintaining illumination at reduced output for approximately 90 minutes. This satisfies emergency egress requirements without additional wiring, external ballast, or a separate emergency lamp. The dual-function driver keeps the ceiling void clean \u2014 only mains and DALI pair wiring needed, no extra components.<\/p>\n The 11mm slim profile fits standard 600 \u00d7 600mm T-bar suspended ceiling grids with no modification to the framework. Spring clips on each corner secure the panel from above \u2014 install from the ceiling void and clip into place. The aluminum housing resists warping and the PMMA diffuser does not yellow over time. IP42 rating covers indoor environments with moderate dust or occasional splashes, such as offices, corridors, and retail floors. The panel is not rated for wet or outdoor locations. A cut-out of approximately 565 \u00d7 565mm is needed for recessed mounting.<\/p>\n The ILED-PL6060-A carries CE and ROHS certifications for electrical safety and restricted substances. The LM80-rated LED source is backed by a 3-to-5-year warranty depending on region and driver configuration. Emergency battery replacement intervals vary by usage cycle \u2014 plan for servicing every several years in high-cycling installations.<\/p>\n Offices, retail stores, hotel corridors, healthcare waiting areas, and classrooms \u2014 anywhere a standard ceiling tile format is needed alongside emergency lighting compliance and DALI dimming control.<\/p>","protected":false},"excerpt":{"rendered":" The ILED-PL6060-A<\/strong> is a 40W slim LED panel light measuring 595 \u00d7 595 \u00d7 11mm. It produces 4000 lumens at 100\u2013110 lumens per watt from an edge-lit LM80 LED source with 3CCT colour temperature switching between 2800K and 6500K. A built-in emergency battery provides backup illumination during power failure for approximately 90 minutes, and the DALI two-wire interface allows precise dimming and scene control via building management systems. This model combines both features in one driver \u2014 unlike the DALI-only or standard variants.<\/p>","protected":false},"featured_media":13254,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,72],"product_tag":[249,282,253],"class_list":["post-13275","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-panel-light","product_tag-aluminum","product_tag-dali","product_tag-emergency","first","instock","featured","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product\/13275","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/comments?post=13275"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media\/13254"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media?parent=13275"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_brand?post=13275"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_cat?post=13275"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_tag?post=13275"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Optical system and light distribution<\/h2>\n
Light quality and colour<\/h2>\n
DALI dimming and emergency backup<\/h2>\n
Build and installation<\/h2>\n
Certifications and warranty<\/h2>\n
Where it gets used<\/h2>\n