The Vapour Proof LED Light is a single-tube fixture built for industrial and commercial spaces where dust, moisture, and physical impact are routine. The M1 series \u2014 ILED-TRP-60C M1 through ILED-TRP-180C M1 \u2014 offers four frame lengths to match different ceiling layouts: 600 mm, 1200 mm, 1500 mm, and 1800 mm. All four share the same 83 \u00d7 72 mm cross-section, giving a tighter profile than the wider M3 family (95 \u00d7 80 mm) while keeping the same mounting style and end-box design.<\/p>\n
Each size delivers 120 lumens per watt \u2014 the 20W model produces 2400 lm, the 40W produces 4800 lm, the 60W produces 7200 lm, and the 80W produces 9600 lm. The LEDs are LM80 rated with CRI above 80, so colours appear natural rather than washed-out. Colour temperature is tunable between 2800K (warm white) and 6500K (cool white) via a dip switch inside the driver, letting you set the right tone for each zone. The 120\u00b0 beam angle spreads light evenly across the floor without hot spots.<\/p>\n
The housing is grey polycarbonate, which resists corrosion from cleaning chemicals and humidity better than bare metal. Class II electrical classification means the fixture has double insulation and does not require a separate earth connection, simplifying wiring in retro-fit projects. The driver provides a power factor above 0.9 and flicker-free operation. Input voltage is 220\u2013240VAC 50\/60 Hz.<\/p>\n
The built-in motion sensor supports corridor mode: when the area is unoccupied the light drops to a low standby level (typically 10\u201330 % of full output), then ramps back to full brightness when movement is detected. This cuts energy use in corridors, storage aisles, and car parks where lights are often left on unnecessarily. The sensor detection range, time-out, and lux threshold can be adjusted with a remote controller or set by the installer before hand-over.<\/p>\n
Three dimming protocols are available: TRIAC (leading-edge), 0-10V analogue, and DALI2 digital. DALI2 is the preferred choice for new builds and major retro-fits because it allows individual fixture addressing, scene setting, and integration with building management systems. The motion sensor and dimming function operate independently \u2014 you can run the sensor in on\/off mode without dimming, or combine DALI2 dimming with sensor control for maximum energy savings. A basic non-dimmable version is also available for spaces that only need on\/off control.<\/p>\n
An emergency version is offered alongside the standard and dimmable models. The emergency driver provides 3 hours of backup illumination at reduced wattage, suitable for exit routes, corridors, and stairwells that require certified escape lighting. Self-testing versions are available on request, allowing facility managers to verify battery health automatically without manual intervention.<\/p>\n
The M1 uses a buckle-lock end-box design: the end caps click into the main body and seal the joint, maintaining the IP65 rating while making field wiring straightforward. Cables enter through the end boxes. The fixture can be surface-mounted to a ceiling or suspended from wires or chains. For concrete or brick ceilings a direct surface-mount bracket is used; for suspended ceilings the fixture hangs from the structural grid or from eye-bolts fixed into the slab above.<\/p>\n
The M1 series carries CE, RoHS, SAA, and TUV certifications, covering compliance for European, UK, Australian, and international markets. The supplier backs the fixture with a 5-year warranty, reflecting confidence in the LED source and driver longevity under normal operating conditions.<\/p>","protected":false},"excerpt":{"rendered":"
Vapour Proof LED Light in 4 sizes \u2014 600mm (20W, 2400 lm), 1200mm (40W, 4800 lm), 1500mm (60W, 7200 lm) and 1800mm (80W, 9600 lm). 120LM\/W output, IP65 sealed against dust and water jets, Class II double-insulated construction. Built-in motion sensor with corridor mode. DALI2, 0-10V, TRIAC dimming, and 3-hour emergency driver variants available. Grey PC housing with buckle-lock end boxes, 83 \u00d7 72 mm depth. CE, RoHS, SAA, TUV certified. 5-year warranty.<\/p>","protected":false},"featured_media":15827,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,150],"product_tag":[294,295,282,253,293,306,254],"class_list":["post-13587","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-tri-proof-light","product_tag-area-lighting","product_tag-commercial-lighting","product_tag-dali","product_tag-emergency","product_tag-line-lighting","product_tag-linear-lighting","product_tag-sensor","first","instock","featured","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product\/13587","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/comments?post=13587"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media\/15827"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media?parent=13587"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_brand?post=13587"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_cat?post=13587"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_tag?post=13587"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}