The ILED-BP-A B2 is an outdoor bollard light with an arch-shaped top, made for garden and driveway lighting. It is the slim round-post fixture you set into a pathway, a driveway edge or a garden border, and it puts out a clean, even light from the top. It comes in three sizes and is sealed for the outdoors with an impact rating, which is what a bollard that people and vehicles move around needs.<\/p>\n
The fixture runs on 220 to 240VAC or 110 to 277VAC and comes in three sizes, 10W, 14W and 20W, at 80 lumen per watt, so the light output is 800, 1120 or 1600 lumen. It uses LumiLEDs, with a CRI above 80 and a colour temperature from 2800K to 6500K. The body is 160mm in diameter, 800mm high as standard, in aluminum with a PC lens, and it is sealed to IP65 with an IK10 impact rating. It is a Class I fixture, certified to SAA, CE and RoHS, with a 3 to 5 year warranty.<\/p>\n
The top of the post is shaped into an arch, which is what the B2 is named for. It is a clean, rounded line instead of a flat cap, so the light comes off the top edge and the whole post reads as a finished feature rather than a bare tube. It is the pick for a garden or driveway where you want the bollard to look deliberate, not just functional.<\/p>\n
The range runs 10W, 14W and 20W, each at 80 lumen per watt, so the output steps up to 800, 1120 and 1600 lumen. The 10W is the softer option for a quiet garden path, the 14W is the everyday all-round choice, and the 20W is the pick for a driveway or a busier walkway where you want the light to read clearly. They all share the same 160mm body and the standard 800mm height, so a set of them lines up along a line.<\/p>\n
The seal is IP65, so it handles rain and spray, which is what a garden or a driveway needs. The IK10 rating is the impact side, which is the important one for a bollard, because it means the fixture is built to take a hit, from a hand, a trolley or a low bump, without failing. It is the difference between one that lasts on a footpath and one that cracks after the first knock.<\/p>\n
The light runs from 2800K to 6500K, so you match the temperature to the space. A warm 3000K suits a home garden and a driveway at night, and a cooler white reads brighter and cleaner for a public walkway or a commercial path. Pick the temperature to suit, and keep it consistent along a run so the light does not shift.<\/p>\n
The post is aluminum with a PC lens, which keeps it light and weather-resistant, and the aluminum handles the heat the light puts out. It is a Class I fixture, so it needs to be earthed on install. Choose the body colour to suit the garden or the building it sits by.<\/p>\n
Each unit ships as a single bollard, with the aluminum post, the PC lens and the mounting base. You choose the size, the colour temperature and the body colour when you order it, and the height can be set to your project.<\/p>\n
You will need to wire it to a 220 to 240VAC or 110 to 277VAC supply, matching the version you ordered, and secure it on a solid base in the ground. Because it is a Class I fixture, the install needs an earth. For dimming, check the version is marked dimmable and use a compatible LED dimmer.<\/p>\n
As a garden and driveway bollard it shows up on pathways and walkways, at the edge of a driveway, along a garden border, and in parks, plazas and commercial areas where you want to mark a line of light and guide people at night. The IK10 rating is the reason it is chosen where it will get knocked, a driveway or a busy footpath rather than a protected spot.<\/p>\n
The LumiLEDs run at 80 lumen per watt with a CRI above 80, a sensible efficiency for an outdoor accent. The aluminum body handles the heat without a fan, and the IP65 seal keeps the weather out, so it is built to stay on the path for years. The IK10 impact rating is the added margin for a bollard that people move around, which keeps it going on a driveway as well as a quiet garden path.<\/p>","protected":false},"excerpt":{"rendered":"
The ILED-BP-A B2 is an arch-top outdoor bollard light for garden and driveway lighting. It comes in three sizes, 10W, 14W and 20W, each running on LumiLEDs at 80 lumen per watt, with a 120 degree beam. The 160mm round body and standard 800mm height keep it slim. It is sealed to IP65 and rated IK10 for impact, which suits a bollard that sits in a driveway or a footpath. Choose a white, black or silver gray body, and run it on 220 to 240VAC or 110 to 277VAC. A 3 to 5 year warranty covers it.<\/p>","protected":false},"featured_media":13412,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[160,152],"product_tag":[294,282,316,319,317],"class_list":["post-14740","product","type-product","status-publish","has-post-thumbnail","product_cat-landscape-led-light","product_cat-led-bollard-light","product_tag-area-lighting","product_tag-dali","product_tag-facade-lighting","product_tag-garden-lighting","product_tag-landscape-lighting","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product\/14740","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/comments?post=14740"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media\/13412"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/media?parent=14740"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_brand?post=14740"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_cat?post=14740"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/ru\/wp-json\/wp\/v2\/product_tag?post=14740"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}