The ILED-OL-A E27 is an oyster ceiling fixture built around a standard E27 bulb base — no bulb included, no built-in driver to fail, and no colour temperature locked in at the factory. You pick the E27 bulb, and you change it whenever the room needs a different light. The aluminium body with a PMMA diffuser measures φ325×98mm in white, spreads a 120-degree beam, and is IP42-rated for indoor ceilings. It runs on 110-240VAC, Class I wired, with a quick connector for the bulb change. CE, RoHS, SAA and TUV certified, five-year warranty.
Category: LED-belysning för kommersiellt bruk , LED-taklampa
Tags: Aluminium , Områdesbelysning , Kommersiell belysning
|
Inmatning |
110V~240VAC 50/60Hz |
Bulb Base |
E27 Bulb Base |
|
Material |
Aluminum + PMMA |
Storlek |
φ325x98mm |
|
Elektrisk klassificering |
Klass I |
IP-klass |
IP42 |
|
Strålvinkel |
120° |
Karossfärg |
White Painted |
|
Garanti |
5 år |
Certifiering |
CE, RoHS, SAA, TÜV |
The ILED-OL-A E27 is the oyster ceiling light stripped back to what lasts: an aluminium body, a PMMA diffuser and a standard E27 bulb base. There is no LED module, no driver and no sensor built into it — you supply the bulb, which means the brightness, the colour temperature and the upgrade path all belong to you rather than to the fixture.
Any E27 lamp works in this fitting: an LED bulb for efficiency, a warm 2700K lamp for a bedroom, a bright 4000K for a kitchen, or a smart bulb if the room is on an app. When the bulb industry moves on, you change the bulb and keep the fixture — which is the whole point of a base-lamp design. The specification carries no bulb, so there is no factory colour temperature to settle for and nothing to go obsolete inside the housing. For a building that is fitted out once and maintained for decades, that division of labour is the practical one: the fixture handles the weather, the wiring and the optics, and the lamp technology keeps improving on its own.
The body is aluminium with a PMMA diffuser, painted white, measuring φ325×98mm, and spreading a 120-degree beam across the room. It is a surface mount: the base fixes to the ceiling, the wiring lands on the terminal block, and a quick connector makes the bulb change a one-hand job. Class I wired, so the circuit needs a protective earth. At φ325mm across and 98mm deep it sits close to the ceiling, and the diffuser softens whatever lamp is fitted — a clear bulb stops glaring, a frosted bulb spreads a little further.
The bulb sits in a quick connector rather than a screw-down holder, so a change is a quarter-turn with one hand — reachable from a step stool without tools. That sounds like a small thing until you count the bulb changes a corridor of fittings collects over ten years, or try to do the last one with the old bayonet style welded in by heat and time.
The rating is IP42 — an indoor ceiling fitting, protected against dripping water and solid objects. That covers bedrooms, living rooms, hallways, home offices and covered entryways; bathrooms and outdoor ceilings need a higher-rated fitting. It runs on 110-240VAC at 50/60Hz, which covers both regional supplies on one SKU. Being Class I, the circuit carries a protective earth and the terminal block lands it properly inside the base — the fitting is simple, but it is not a shortcut on the wiring.
Rental and social housing is the natural home for this design: the landlord fits the fixture once, and tenants change bulbs as they please without touching the wiring. Between tenancies there is nothing to re-program and no proprietary lamp to source — the outgoing tenant takes their bulbs and the next one fits their own. Hotels and offices use it in back-of-house corridors where a standard lamp is all the room needs. Kitchens and home offices take brighter lamps, bedrooms take warmer ones, and the fixture stays out of the decision. Facility teams like it for the same reason: when a lamp fails, the fix is stocked in every hardware aisle, and there is no module to order from a catalogue.
The ILED-OL-A E27 carries CE, RoHS, SAA and TUV certification. The warranty is five years on the fixture itself. There are no electronics inside to fail — the maintenance routine is the bulb change, and the diffuser wipe that comes with any ceiling fitting. The TUV mark behind the CE, RoHS and SAA paperwork also covers the fixture side of the safety case: the housing, the terminal block and the base, which is the part that stays on the ceiling long after any bulb is gone.
Varför väljer köparna just dessa framför alternativen? Här är vad vi hör från kunderna:
The light source is your choice. Any E27 lamp fits — brightness, colour temperature, dimmable or smart — and the next upgrade is a bulb change, not a fixture replacement.
Nothing inside to fail. No driver, no LED module, no sensor: the failure points of an integrated fitting simply do not exist here, which is why a five-year warranty on the housing is easy to stand behind.
Aluminium, not plastic. The body sheds the bulb’s heat instead of trapping it, and the white-painted finish with a PMMA diffuser spreads a 120-degree beam without hot spots.
A quick connector on the base. The bulb change is a one-hand job from a step stool, and the surface mount is a two-screw install on a Class I circuit.
SAA, CE, RoHS and TUV. One product clears Australia, New Zealand and Europe with a test mark behind it.
No. The fixture is the housing only — aluminium body, PMMA diffuser and a standard E27 base. You supply any E27 lamp: LED, CFL or incandescent, in whatever brightness and colour temperature the room needs.
Whatever the room calls for. A 2700K LED suits bedrooms and living rooms, a 4000K suits kitchens and work areas, and smart E27 bulbs work the same as any other. Because the fitting carries no electronics, the bulb’s own rating decides the brightness and the colour.
That depends entirely on the bulb you fit, not on this housing. The fixture carries the E27 base, the diffuser and the aluminium body; choose a quality LED bulb and you get its efficiency and its flicker performance.
Indoors, on ceilings in bedrooms, hallways, living rooms and covered entryways. The rating is IP42 — protected against dripping water and solid objects — so bathrooms and outdoor ceilings need a higher-rated fitting.
A surface mount: fix the base to the ceiling, land the supply on the terminal block, and close the body. It is Class I wired, so the circuit needs a protective earth, and an electrician should make the connection per local code. The quick connector makes the bulb change a one-hand job afterwards.
110-240VAC at 50/60Hz, which covers regional supplies on one SKU.
φ325mm across and 98mm deep, in a white-painted aluminium finish with a PMMA diffuser. The 120-degree beam spreads the lamp’s light evenly across the room below.
CE, RoHS, SAA and TUV. The warranty on the fixture is five years — straightforward to honour, because there are no electronics inside to fail.
The ILED-OL-A E27 is an oyster ceiling fixture around a standard E27 bulb base — the fitting you fit once and maintain with a bulb change.
Rental and social housing. The landlord fits the fixture once; tenants swap bulbs as they please without touching the wiring, and the housing survives every tenancy.
Hotel back-of-house corridors. A standard lamp is all the route needs, and housekeeping can replace a bulb without a work order for an electrician.
Kitchens and home offices. Fit a bright 4000K lamp for task hours, and change it for a warmer one if the room changes purpose.
Hallways and entryways. The 120-degree diffuser spreads whatever lamp is fitted evenly across the route, and the IP42 rating covers the drips an entry door lets in.
Offices and commercial fit-outs. Where a lighting design is still being decided, the fixture goes in first and the lamps are tuned per room afterwards.
Student and worker accommodation. Durable housing, no electronics to break, and a bulb change that anyone in the room can do — the five-year housing warranty covers the part that actually needs covering.
Package Information:
| Modell | Gross Weight / Piece | Inner Box Size | Quantities / Carton | Kartongstorlek | Gross Weight / Carton |
| ILED-OL-A18W E27 | 1.18 KGS | 335x335x110 mm | 10 pieces | 685x565x360mm | 12.8 KGS |
| ILED-OL-A24W E27 | 1.65 KGS | 415x415x120 mm | 5 pieces | 620x430x440mm | 8.6 KGS |
"Finally we have found a good partner iLed who can provide stable and super brightness standby LED ceiling lights with dimmable motion sensor, it is not only high power factory, but also flicker free and stable. The earliers projects used these standby motion sensor LED ceiling lights from iLed have worked well than 5 years."
"We are selling CCT version LED ceiling lights, which is color temperature switched,so that we just need to do a stock for all color temperatures. Best to improve our flexible plans. If you are finding a supplier who can manufacture super brightness and stable LED ceiling lights,iLed is a very good partner for long-term."
"iLed helped us win many apartments’ projects with their Mast-Slave motion sensor surface mounted LED ceiling lights.All results were outstanding. The synchronized lighting control provided by the mast-slave setup was truly impressive. If you are seeking this function ceiling light, you can try iLed."
"We made a wise choice by purchasing emergency LED ceiling lights from iLed. The quality and brightness of the light are impressive, providing him with a reliable source of illumination during emergencies. It’s great to see people investing in practical and efficient solutions for their safety. Kudos to David for prioritizing quality and making a smart purchase!"
"iLed’s DALI LED ceiling lights offer seamless integration with our DALI lighting control systems, allowing for exactly and efficient lighting management.High-quality body and advanced LED technology ensure exceptional performance and energy efficiency. The DALI LED ceiling lights are also uniform and glare-free."
"iLed is always feedbacking the professional lighting solution for our requirements. As the guys said “Just told all your required, others leaves to iLed.”, a project of the center ROMA hopistal, which required double emergency 3 hours backup in LED ceiling lights, iLed just took 10 days from doing the solution to finish the order."
"Finally we have found a good partner iLed who can provide stable and super brightness standby LED ceiling lights with dimmable motion sensor, it is not only high power factory, but also flicker free and stable. The earliers projects used these standby motion sensor LED ceiling lights from iLed have worked well than 5 years."
"We are selling CCT version LED ceiling lights, which is color temperature switched,so that we just need to do a stock for all color temperatures. Best to improve our flexible plans. If you are finding a supplier who can manufacture super brightness and stable LED ceiling lights,iLed is a very good partner for long-term."
"iLed helped us win many apartments’ projects with their Mast-Slave motion sensor surface mounted LED ceiling lights.All results were outstanding. The synchronized lighting control provided by the mast-slave setup was truly impressive. If you are seeking this function ceiling light, you can try iLed."
"We made a wise choice by purchasing emergency LED ceiling lights from iLed. The quality and brightness of the light are impressive, providing him with a reliable source of illumination during emergencies. It’s great to see people investing in practical and efficient solutions for their safety. Kudos to David for prioritizing quality and making a smart purchase!"
"iLed’s DALI LED ceiling lights offer seamless integration with our DALI lighting control systems, allowing for exactly and efficient lighting management.High-quality body and advanced LED technology ensure exceptional performance and energy efficiency. The DALI LED ceiling lights are also uniform and glare-free."
"iLed is always feedbacking the professional lighting solution for our requirements. As the guys said “Just told all your required, others leaves to iLed.”, a project of the center ROMA hopistal, which required double emergency 3 hours backup in LED ceiling lights, iLed just took 10 days from doing the solution to finish the order."
"Finally we have found a good partner iLed who can provide stable and super brightness standby LED ceiling lights with dimmable motion sensor, it is not only high power factory, but also flicker free and stable. The earliers projects used these standby motion sensor LED ceiling lights from iLed have worked well than 5 years."
"We are selling CCT version LED ceiling lights, which is color temperature switched,so that we just need to do a stock for all color temperatures. Best to improve our flexible plans. If you are finding a supplier who can manufacture super brightness and stable LED ceiling lights,iLed is a very good partner for long-term."
"iLed helped us win many apartments’ projects with their Mast-Slave motion sensor surface mounted LED ceiling lights.All results were outstanding. The synchronized lighting control provided by the mast-slave setup was truly impressive. If you are seeking this function ceiling light, you can try iLed."
"We made a wise choice by purchasing emergency LED ceiling lights from iLed. The quality and brightness of the light are impressive, providing him with a reliable source of illumination during emergencies. It’s great to see people investing in practical and efficient solutions for their safety. Kudos to David for prioritizing quality and making a smart purchase!"
"iLed’s DALI LED ceiling lights offer seamless integration with our DALI lighting control systems, allowing for exactly and efficient lighting management.High-quality body and advanced LED technology ensure exceptional performance and energy efficiency. The DALI LED ceiling lights are also uniform and glare-free."
"iLed is always feedbacking the professional lighting solution for our requirements. As the guys said “Just told all your required, others leaves to iLed.”, a project of the center ROMA hopistal, which required double emergency 3 hours backup in LED ceiling lights, iLed just took 10 days from doing the solution to finish the order."
LED-belysning för kommersiellt bruk
LED-belysning för kommersiellt bruk
LED-belysning för kommersiellt bruk
LED-belysning för kommersiellt bruk
Alla våra LED-belysningslösningar kan anpassas efter dina behov. Vi erbjuder dessutom kostnadsfria och icke-bindande konsultationer, prototyputveckling och provtestning, och kan hjälpa dig med dina utvecklingsprojekt.
Simply contact us with your special requirements and our experts will gladly help you find the best solution for your project.