The ILED-BH-016 E is the rectangular up-and-down wall light in the iLED exterior range: a slim 200\u00d7100\u00d7107mm fitting that throws a 5W beam up the wall and a 5W beam down from the same body. Where a round up-and-down light reads as a classic porch fitting, this rectangular one sits flatter and more architectural on the wall, which is why it ends up on contemporary facades, entrance recesses and garden features.<\/p>\n
Each fitting carries two 5W LED sources behind 60-degree lenses, one aiming up and one aiming down. The light climbs the wall above and spills down below, giving the facade depth after dark without any bright fitting at eye level. Colour rendering is above 80, and the colour temperature is specified at order across 2800K to 6500K \u2014 warm tones for brick and timber, cooler ones for render and concrete. At 5W per beam this is an accent, not a floodlight: it decorates the wall it sits on and marks the route past it, which is exactly the job on an entrance.<\/p>\n
The body is aluminium with tempered glass lenses, closed on a silicone gasket and sealed to IP65 against dust and water jets from any direction, so it mounts on exposed walls that take the full weather. The finish is black or white \u2014 black for contemporary facades, white where the fitting should sit quietly against light render. At 107mm deep it stands off the wall just enough for the beams to clear the surface and wash it evenly, without the fitting reading as bulky from the path.<\/p>\n
The fixture runs on 220-240VAC or 120VAC, Class I wired, with the driver inside the body \u2014 no separate box to mount. There is no colour-temperature switch on the fitting, so the temperature is locked in at order; confirm it when you specify rather than on the ladder. The body opens from the back plate for the connection, then closes again over the gasket, so the seal is never compromised by a driver swap or a field repair.<\/p>\n
You need the wall fixings suited to the surface \u2014 masonry plugs for brick and block, suitable screws for timber framing \u2014 and a switched circuit with a protective earth for the Class I connection. The Allen key for the body comes in the accessories. An electrician should make the hardwired connection per local code, and since the driver and LEDs are integral there is no lamp stock or spare driver to hold for the fitting.<\/p>\n
Installation is a surface mount onto the supplied back plate. An Allen key in the accessories opens the body from the plate; mark the fixing holes, drill and plug the wall, fix the plate, terminate the supply into the terminal block, and close the body over it. An electrician should handle the connection \u2014 it is a Class I fitting and the earth must land on its terminal.<\/p>\n
Entrance doors and porch walls are the natural home, where the double wash marks the door without glare. Garden walls, gate pillars and courtyards take it for evening depth along the paths people actually use. On commercial fronts it runs along the elevation in a repeat, giving a hotel or restaurant wall a rhythm after dark. House side doors, garage approaches and stair walls fill out the rest of the order. Because the fitting is IP65, none of these positions need a canopy over them before the light can be specified.<\/p>\n
The ILED-BH-016 E carries SAA for Australia and New Zealand, CE for Europe, and RoHS. The sealed body needs no routine work inside; a wipe of the glass faces during site maintenance keeps the wash even.<\/p>","protected":false},"excerpt":{"rendered":"
The ILED-BH-016 E is a rectangular up-and-down LED wall light that throws a 5W beam up the wall and another down, each through a 60-degree lens. The aluminium body with tempered glass lenses measures 200\u00d7100\u00d7107mm and comes in black or white, sealed to IP65 for exposed exterior walls. It runs on 220-240VAC or 120VAC, Class I wired, with colour temperature options across 2800\u20136500K specified at order and CRI above 80. SAA, CE and RoHS certified, it suits entrance walls, garden features and contemporary facades alike.<\/p>","protected":false},"featured_media":14401,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[160,236],"product_tag":[305,316,317,307],"class_list":["post-14393","product","type-product","status-publish","has-post-thumbnail","product_cat-landscape-led-light","product_cat-led-wall-mounted-light","product_tag-decorative-lighting","product_tag-facade-lighting","product_tag-landscape-lighting","product_tag-spot-lighting","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/product\/14393","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/comments?post=14393"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/media\/14401"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/media?parent=14393"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/product_brand?post=14393"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/product_cat?post=14393"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/sv\/wp-json\/wp\/v2\/product_tag?post=14393"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}