The ILED-FR10 is the five-ring arc: five LED rings set along a compact aluminum-and-iron curve, the whole fitting standing 100cm tall with the rings climbing it like circles of light. It is the compact member of the arc family — where the FR1 crosses a sofa at 170cm, the FR10 fills the corner, the bedside and the entrance positions that take the design at a smaller scale.
The five rings
The five rings are the design and the light at once: each ring is a circle of LED behind the silica gel diffuser, and the five stack along the arc so the fitting reads as a column of rings from any angle. At D20cm each ring is the size that fits the compact arc, and together they put the light at the heights a room actually uses — the lower rings over the furniture, the upper ones lifting the corner.
The function versions
The function is chosen at order: dual colour (two colour temperatures switchable), RGB (the full colour range), RGBW (colour plus a dedicated white channel), with other options available. All three run from the integrated source, so the function is built into the fixture rather than added later — confirm the version against how the room runs at order time. Dual colour suits the living positions that switch between work and evening; RGBW is the one for the rooms that need the clean white as well as the colour.
The materials
The arc is aluminum and iron with silica gel diffusers over the rings — the combination that keeps the fitting light on its base and the rings evenly lit. The finish runs white or black, and both suit the modern interiors the compact arc is drawn for.
Installation and care
The lamp assembles from the base, the arc and the rings, and it plugs into the nearest wall socket — no ceiling wiring and no electrician. The aluminum arc wipes with a dry cloth and the silica gel diffusers dust the same way. The lamp is a dry indoor decorative fitting; it is not a bathroom or outdoor product.
สถานที่ที่ใช้
Bedside and sofa-side positions, where the compact arc fits the smaller rooms. Entrances and hallways, where the five rings mark the position. Media and gaming corners, where the RGB and RGBW versions run the colour. And the retail and salon interiors, where the ring design is the display as much as the light — the fitting that guests photograph before they ask about the merchandise. In each of these the five rings do the decorative work and the integrated source does the lighting work, chosen together at order — which is why the fitting moves between rooms without a bulb box or a controller.
Choosing the function version
Three decisions shape the order: the function against how the room runs, the finish against the interior, and the position against the 100cm arc and its footprint. Dual colour suits the living positions that switch between the working light and the evening; RGB suits the rooms that run the colour for the atmosphere; RGBW adds the dedicated white channel for the positions that need the clean white as well as the colour. Measure the corner before ordering, because the 100cm arc and the D20cm rings are the scale that fits the compact positions — the bigger arcs are the FR1’s territory.
Choosing the function version
Three decisions shape the order: the function against how the room runs, the finish against the interior, and the position against the 100cm arc and its footprint. Dual colour suits the living positions that switch between work and evening; RGB runs the colour for the atmosphere; RGBW adds the dedicated white channel for the positions that need the clean white as well. Measure the corner before ordering, because the 100cm arc and the D20cm rings fit the compact positions — the taller arcs are the FR1’s territory.
