12V 24V 10-36V Düşük Gerilimli Mum tipi Ayrıştırılabilir LED Ampul Işığı Güneş Sistemi için ILED-BL032 L …

The ILED-BL032 L is the candle bulb for the systems that run on batteries: solar setups, off-grid cabins, boats, RVs and the garden circuits fed from a 12V or 24V supply. Standard mains bulbs cannot run there, and the low-voltage halogens burn the battery bank down. This bulb takes a wide 10-36V DC input directly, in a candle-shaped glass body, with the cap options to fit the fittings the system already has.

The wide low-voltage input

The input accepts 12V, 24V and 36V and anything between 10V and 36V, which is the range a real battery system actually delivers. A 12V battery bank sits at 13.8V while charging and drops under load; a 24V bank sits at 27.6V. A bulb built for exactly 12V misbehaves across that range. This one takes the range as designed, so the bulb runs from a solar charge controller, a battery bank or a low-voltage garden supply without a transformer and without the voltage sensitivity that kills ordinary bulbs on battery systems.

Dört çıkış

The range runs 2W, 4W, 6W and 8W, ordered against the brightness the position needs and the budget the battery bank can carry. The 2W and 4W suit the decorative fittings and the reading positions where the solar budget is tight; the 6W and 8W carry the table and the living space. Colour comes in 3000K, 4000K and 6000K — warm, neutral and cool — chosen per room at order time, and the bulb dims on a compatible low-voltage dimmer, which is the behaviour a solar evening wants.

The candle body and the caps

The body is glass, in the candle shape that suits the chandeliers, the wall fittings and the table lamps a low-voltage system usually feeds. The cap choice is the widest part of the specification: E27 and E26 for the standard fittings, E14 and E12 for the small chandelier sockets, B22 and B15 for the bayonet markets. One bulb range covers the fittings across the markets and the systems without adapters.

Dimmer

The bulb dims on a compatible low-voltage dimmer, which is what a solar system usually wants: the evening drops the light instead of switching it, and the battery bank keeps its reserve. Match the dimmer to the bulb and the supply voltage, because the low-voltage dimmers differ from the mains types.

Nerede kullanılır

Solar-powered homes and cabins, where the decorative fittings run from the battery bank and every watt is budgeted. Boats and RVs, where the 10-36V input covers the supply while charging and while the engine is off. Garden and landscape circuits on a 12V or 24V supply, where the candle shape suits the wall and post fittings. Off-grid and backup systems, where the lighting has to keep running when the mains does not. The candle shape carries the decorative duty on those systems too: the chandelier over the table and the wall fittings in the hallway run from the same bank, at the wattages the budget allows.

Sizing the system around the bulbs

Because the bulb is a battery load, the order is also part of the system design. Count the fittings, take the wattage of the bulbs you plan to run together, and check the total against the battery bank and the charge controller before ordering. The four outputs exist for exactly that arithmetic: 2W in the fittings that burn all evening, 8W in the positions that run for an hour at dinner. That flexibility is what makes a solar room work — the light is budgeted like everything else on the system, and the bulb range gives the budget options at each position instead of one fixed load.

Why do buyers pick the ILED-BL032 L over the alternatives? Here is what we hear from customers:

It takes the voltage a battery actually delivers. A 12V bulb built for exactly 12V misbehaves when the bank sits at 13.8V charging or drops under load. The 10-36V input takes that range as designed, so the bulb survives the system it was bought for.

Four outputs, budgeted per room. 2W to 8W covers the reading light to the table fitting, and the low end is what a solar budget asks for: decorative light that does not drain the bank.

The cap range fits the fittings you already have. E27, E26, E14, E12, B22 and B15 — the solar retrofit does not need new fittings, only new bulbs in the caps the system already carries.

Glass candle body. The candle shape and the glass construction suit the chandeliers, wall fittings and table lamps a low-voltage system feeds, without the plastic look of most low-voltage bulbs.

It dims on a low-voltage dimmer. The evening drops the light instead of switching it, which keeps the reserve in the battery bank and the atmosphere in the room.

The ILED-BL032 L feeds the decorative fittings on the systems that run on batteries: anywhere the supply is 10-36V DC and the mains bulb cannot go.

Solar homes and cabins. The candle bulbs in the wall fittings and the table lamps, running from the battery bank through the evening, with the 2W and 4W outputs where the solar budget is tight and the 8W where the room needs it.

Boats and RVs. The 10-36V input covers the supply charging and discharging, the glass candle shape suits the interior fittings, and the cap range matches the fittings the vehicle already carries.

Garden and landscape circuits. The 12V or 24V garden supply runs the post fittings and the wall lanterns, and the candle bulb drops into the fittings without a transformer at every position.

Off-grid and backup systems. Where the lighting has to keep running when the mains does not, the low-voltage circuit and these bulbs carry the room, and the dimming keeps the reserve in the bank.

Chandeliers on low-voltage systems. The multi-cap range — E27, E26, E14, E12, B22, B15 — means one bulb range covers the chandelier sockets across the markets, at the wattage the bank can carry.