The ILED-OL-A D is a waterproof recessed ceiling light built for damp and wet locations. Three wattage options—18W, 24W, and 30W—each deliver 120LM/W with PC body and PC diffuser in white finish. Input voltage covers 220-240VAC or 110-277VAC, and the 3CCT driver lets you pick 3000K warm, 4000K neutral, or 6000K cool white at install. Four cable entries make wiring multiple fixtures simple.
Three sizes, one design
The series comes in three sizes that share the same IP65 housing and driver design, differing only in diameter and output. The 18W model is the compact option at D260×95mm for smaller rooms; the 24W steps up to D320×100mm for mid-size spaces; the 30W tops the range at D360×110mm for larger areas. All three run at 120 lumens per watt, hold CRI above 80, and keep the power factor above 0.9. Behind the PC diffuser the output spreads in a wide, even pattern, which is what you want from a general ambient ceiling fixture rather than a narrow directional one.
The ILED-OL-A18W D runs 18W, delivers 2160 lumens, and fits a D260×95mm ceiling opening. The ILED-OL-A24W D pushes 24W and 2880 lumens from a D320×100mm housing. The ILED-OL-A30W D tops out at 30W and 3600 lumens from a D360×110mm frame. All three use LM80-certified LEDs, maintain CRI >80, and draw power factor above 0.9.
IP65 build for wet spaces
The PC body and matching PC diffuser seal the LED modules from dust and water jets from any direction. That IP65 rating means the fixture handles bathroom steam, covered patio rain, and industrial washdown without corrosion—conditions where metal housings often degrade over time.
Four cable entry ports run along the base ring. They let you wire several fixtures from a single junction box in a daisy-chain layout, reducing conduit runs and hidden wiring. Both surface-mounted and recessed installations work—the cutout diameter matches the model size: 260mm for the 18W, 320mm for the 24W, and 360mm for the 30W.
3CCT colour selection
The 3CCT (Tri Color Changeable) driver has a physical switch on the unit itself. Before powering the fixture for the first time, set the switch to your preferred colour temperature—3000K warm white, 4000K neutral white, or 6000K cool white. Once set, the colour stays fixed until you change the switch again. All three modes maintain CRI >80 so colours appear natural rather than washed out. This is useful when a space serves two purposes—warm light for a living area, cool light for task work.
Những gì có trong hộp
Each unit ships as a complete fixture including the sealed driver, PC diffuser, and mounting clips. No separate transformer is needed for basic operation.
Những gì bạn cần cung cấp
A standard ceiling cutout matching the model diameter (260mm, 320mm, or 360mm). For recessed installation, the plenum depth must accommodate the housing height: 95mm for the 18W, 100mm for the 24W, and 110mm for the 30W. Standard wiring tools and a voltage tester. A licensed electrician for damp-location hardwiring per local code.
Optional features
DALI dimming, 0-10V dimming, motion sensors, and emergency backup kits are available as factory options. They are selected at order time and cannot be added later. DALI and 0-10V connect to building automation systems for scheduled or sensor-triggered control. Motion sensors activate the light automatically in corridors and storage areas. Emergency backup provides battery-backed illumination during power failures—professional wiring is recommended for the emergency circuit, and backup duration depends on the specific kit chosen.
Chứng nhận và bảo hành
SAA, CE, and RoHS certifications confirm compliance with safety and environmental standards. Warranty is 3-5 years depending on the configuration—verify the exact term with your supplier at the time of order.
Maintenance
Wipe the PC diffuser with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners, which can cloud the material. The sealed driver does not require user servicing. Replace the entire fixture if the driver fails rather than attempting field repair.
Nơi được sử dụng
Bathrooms and wet rooms where steam and splashes challenge standard fixtures. Covered patios and balconies exposed to rain and humidity. Commercial garages and workshops with voltage fluctuations and vibration. Hotel corridors and common areas where DALI zone control reduces energy waste. Laundromats and pool rooms where constant moisture demands IP65-rated equipment throughout the year.
