The ILED-BH-S20W is a square bulkhead light designed for ceiling or wall mounting in environments where water resistance and impact protection matter. The die-cast aluminium body gives it the structural strength to survive bumps, vibration and rough handling, while the IK10-rated polycarbonate lens means accidental contact from carts, ladders or stored materials will not crack the diffuser. This is why it appears so frequently in car parks, warehouses and utility areas where fixtures take a beating.<\/p>\n
The ILED-BH-S20W comes in two wattage options. The 20W version produces 2200 lumens at 110 lumens per watt. The 30W version steps up the output proportionally while keeping the same 110LM\/W efficacy. Both run on 220-240VAC or 110-277VAC 50\/60Hz mains, so the fixture works in most regions without a transformer. The colour temperature is selectable at installation \u2014 choose between 2800K warm white, 4000K neutral and 6500K cool white. Colour rendering sits above 80, which is sufficient for task and general illumination. The 120\u00b0 beam angle spreads light evenly across the floor without creating narrow hot spots. IP65 rating keeps dust and water jets out; IK10 rating means the lens survives a 5 joule impact \u2014 roughly a 500-gram weight dropped from 1 metre.<\/p>\n
The housing is die-cast aluminium, finished in white or black powder coat. The diffuser is anti-UV polycarbonate, rated IK10, mounted with a gasketed seal that maintains the IP65 rating when the fixture is closed. The integral driver is sealed inside the aluminium body \u2014 no external ballast or separate power supply is needed. Wiring is direct to mains through the terminal block inside the housing. The fixture can be surface-mounted to a flat ceiling or wall using the four mounting points on the back plate, or recessed into a 300\u00d7300mm cutout if the ceiling construction allows. Electrical classification is Class I, meaning it requires a protective earth connection.<\/p>\n
This is a standard non-dimmable, non-controlled bulkhead. It switches on and off with the circuit \u2014 wall switch, sensor, or timer \u2014 with no dimming or DALI capability built in. If your project requires motion sensing, photocell control or DALI addressing, order the wall-packed or emergency variants from the same series instead.<\/p>\n
Each unit ships as a single bulkhead with the driver pre-installed, mounting hardware included and the terminal block ready for connection. The anti-UV PC lens is factory-fitted and should not be removed after installation. No separate controllers, transformers or drivers are packed inside \u2014 the fixture is ready to wire direct to mains.<\/p>\n
A circuit breaker or wall switch for on\/off control. A suitable ceiling or wall mounting surface that can support the fixture weight. For outdoor or wet-location installations, confirm the mounting location is within the IP65 protection zone and that the seal remains intact after installation. No special tools beyond a screwdriver and wire strippers are required.<\/p>\n
The ILED-BH-S20W is built for areas where the fixture is exposed to impact, moisture or harsh conditions. Car parks and undercroft parking benefit from the IK10 lens and IP65 seal \u2014 the fixture survives the occasional impact from vehicle doors and handles rain runoff without failure. Warehouse aisles and storage areas use it for general illumination where overhead fixtures are vulnerable to forklift contact. Outdoor walkways, loading bays and service corridors take advantage of the wide 120\u00b0 beam and the two-wattage range to cover both tight utility spaces and broader open areas from the same product line. The 3CCT option lets a single SKU serve warm-white hospitality entrances and cool-white security zones on the same project.<\/p>\n
The ILED-BH-S20W carries SAA, CE and RoHS certifications. The SAA approval covers Australian and New Zealand market requirements, which is notable since many competitors in this category only list CE. The warranty period is three to five years depending on the region and distributor terms.<\/p>\n
The LumiLEDs LM80 source is rated for extended operation with lumen maintenance above the typical decay curve for commercial bulkhead lights. The sealed IP65 housing means no routine cleaning of internal components is required. Occasional external wiping of the PC diffuser with a damp cloth is sufficient to maintain light output. The anti-UV treatment on the lens prevents yellowing over time, keeping illumination levels stable throughout the rated lifespan.<\/p>","protected":false},"excerpt":{"rendered":"
The Square Weatherproof IP65 IK10 LED Bulkhead Light (ILED-BH-S20W) is a rugged die-cast aluminium fixture built for demanding indoor and outdoor ceiling or wall mounting applications. It delivers 2200 lumens at 20W or higher output at 30W, both rated at 110 lumens per watt for excellent efficacy. The 300\u00d7300\u00d790mm housing is available in white or black, and the IK10 polycarbonate lens handles impact from accidental contact. Three colour temperatures are selectable at installation.<\/p>","protected":false},"featured_media":13074,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,149],"product_tag":[249,324,294,295,248,247],"class_list":["post-13075","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-bulkhead-light","product_tag-aluminum","product_tag-amenity-lighting","product_tag-area-lighting","product_tag-commercial-lighting","product_tag-ik10","product_tag-ip65","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product\/13075","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/comments?post=13075"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media\/13074"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media?parent=13075"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_brand?post=13075"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_cat?post=13075"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_tag?post=13075"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}