The ILED-PL6060-A DALI<\/strong> is a slim 40W LED panel light in the standard 595 \u00d7 595mm ceiling tile format. It produces 4000 lumens at 100\u2013110 lumens per watt from an edge-lit LM80 LED source, drawing power from 220\u2013240VAC or 110\u2013277VAC with a power factor above 0.9. The housing is 11mm thick with an aluminum body finished in white or silver, and the diffuser is a non-yellowing PMMA plate that spreads light across a 120\u00b0 beam angle. UGR is 22 as standard, with an optional UGR below 19 glare-control version available. The CCT switch lets you choose between 2800K warm white and 6500K cool white at installation \u2014 all variants maintain CRI above 80. This panel belongs to the ILED-PL6060-A family alongside the standard non-dimmable and emergency+DALI versions, sharing the same housing and optical system.<\/p>\n The edge-lit design uses a PMMA light guide plate to spread light uniformly across the full panel surface. Light from the perimeter LEDs travels through the guide plate and exits through micro-structures printed on the plate surface, creating even brightness with no visible hot spots or dark zones. The 120\u00b0 beam angle covers a broad area without needing multiple overlapping fixtures. A prismatic or frosted diffuser option is available if further softening of the light output is desired. This optical system is the same as the standard and emergency variants in the ILED-PL6060-A family \u2014 only the driver differs, so the light quality is consistent across all three models.<\/p>\n The branded DALI driver provides digital addressable lighting interface control \u2014 the standard two-wire protocol used in commercial building management systems. Each panel receives a unique DALI address, allowing individual dimming, scene programming, and group control. Set brightness levels per zone, schedule on\/off times, and integrate with occupancy sensors or daylight harvesting systems. Unlike proprietary wireless controllers, DALI is an open standard that works with any DALI-compatible BMS without additional gateways or adapters. Common compatible controllers include systems from Lutron, Crestron, Siemens, and Schneider Electric. The driver supports standard DALI-2 features including group addressing, scene recall, and device testing. Dimming range covers 10% to 100% of rated output.<\/p>\n The 11mm slim profile fits standard 600 \u00d7 600mm T-bar suspended ceiling grids with no modification to the framework. Spring clips on each corner secure the panel from above \u2014 install from the ceiling void and clip into place. The aluminum housing resists warping and the PMMA diffuser does not yellow over time. IP42 rating covers indoor environments with moderate dust or occasional splashes, such as offices, corridors, and retail floors. The panel is not rated for wet or outdoor locations. A cut-out of approximately 565 \u00d7 565mm is needed for recessed mounting. Connect only mains power and the DALI pair \u2014 no separate control wiring required. The driver compartment is accessible from below the ceiling for service or CCT adjustment.<\/p>\n The ILED-PL6060-A DALI carries CE and ROHS certifications for electrical safety and restricted substances. The LM80-rated LED source is backed by a 3-to-5-year warranty depending on region and driver configuration. Replace the driver only with an identical DALI-branded unit to maintain certification compliance.<\/p>\n Offices, retail stores, hotel corridors, classrooms, and healthcare waiting areas \u2014 anywhere a standard ceiling tile format is needed alongside DALI dimming control and centralized building management.<\/p>","protected":false},"excerpt":{"rendered":" The ILED-PL6060-A DALI<\/strong> is a 40W slim LED panel light measuring 595 \u00d7 595 \u00d7 11mm. It produces 4000 lumens at 100\u2013110 lumens per watt from an edge-lit LM80 LED source with 3CCT colour temperature switching between 2800K and 6500K. A branded DALI driver provides addressable dimming and scene control via building management systems. This model has DALI control only \u2014 no emergency battery, unlike the ILED-PL6060-A with emergency backup. IP42 rated, UGR \u226422 standard with a below-19 low-glare option available.<\/p>","protected":false},"featured_media":13254,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,72],"product_tag":[249,282,253],"class_list":["post-13286","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-panel-light","product_tag-aluminum","product_tag-dali","product_tag-emergency","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product\/13286","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/comments?post=13286"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media\/13254"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media?parent=13286"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_brand?post=13286"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_cat?post=13286"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_tag?post=13286"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Optical system and light distribution<\/h2>\n
DALI dimming control<\/h2>\n
Build and installation<\/h2>\n
Certifications and warranty<\/h2>\n
Where it gets used<\/h2>\n