The ILED-TPR-A is a basic LED triproof fitting in the ILED-TPR-B family. It is distinguished by its 90 \u00d7 74 mm aluminum-and-PC housing, IP66 sealing, IK10 impact rating, and four wattage options up to 80W \u2014 the highest in the basic triproof range. The A-series does not include DALI2, emergency backup, or a motion sensor; those features are reserved for the ILED-TPR-C M-series.<\/p>\n
The A-series uses an aluminum body that acts as a passive heat sink, drawing heat away from the LED array without fans or moving parts. This design supports the 120 lm\/W output across all four wattage levels \u2014 including the 80W \/ 1500 mm variant \u2014 without thermal throttling. The aluminum housing is powder-coated in white or silver to resist corrosion in damp environments.<\/p>\n
The PC diffuser is secured to the aluminum body with a sealed gasket, maintaining the IP66 rating at the junction between the optics and the driver compartment.<\/p>\n
The A-series is supplied as a complete unit with integral driver. Surface mounting uses the built-in fixing brackets \u2014 two points per fixture, suitable for concrete, timber, and metal ceiling structures. The PC diffuser is pre-fitted and does not require separate handling during installation.<\/p>\n
Maintenance is minimal. The sealed aluminum-PC housing keeps dust and moisture out of the LED compartment. In standard conditions the LED source retains above 80% of initial lumens for the life of the 5-year warranty period. If the diffuser surface accumulates dust or debris, a damp cloth wipe is sufficient \u2014 no access to the driver is needed.<\/p>\n
The ILED-TPR-A is suited to demanding indoor and outdoor environments where IP66 sealing, IK10 impact resistance, and high output from a single-tube form factor are all required. It does not include DALI2 control, emergency backup, or a motion sensor \u2014 those features belong to the ILED-TPR-C M-series. Below are the applications customers specify the A-series for most often.<\/p>\n
Warehouses and distribution centres.<\/strong> \u2014 High bays and long aisles benefit from the 80W \/ 9600 lm output of the 1500 mm variant, which covers a wide floor area from a single ceiling-mounted unit. The IK10 rating protects against forklift bumps and falling objects common in these environments.<\/p>\n Manufacturing workshops and assembly lines.<\/strong> \u2014 The aluminum body provides durable heat dissipation for continuous operation, while the 120 lm\/W output keeps running costs low. Choose the 60W \/ 1200 mm variant for general workshop illumination; upgrade to 80W where task lighting density is higher.<\/p>\n Outdoor car parks, loading bays, and building exteriors.<\/strong> \u2014 IP66 sealing handles rain driven sideways by wind, and IK10 impact resistance survives the occasional struck pallet or dropped tool. The wide voltage range (110\u2013277VAC) means the same SKU works in both 110V and 230V regions without reordering.<\/p>\n Agricultural and food-processing buildings.<\/strong> \u2014 The IP66 seal tolerates frequent high-pressure wash-down, and the sealed aluminum-PC housing resists the corrosive effects of cleaning chemicals and ambient humidity common in dairy, poultry, and meat-processing environments.<\/p>\n Retail stockrooms and back-of-house areas.<\/strong> \u2014 Basic on\/off operation is all that is required in these spaces. The A-series delivers high output at a competitive price point without the added cost of DALI2 or emergency driver variants that the M-series offers.<\/p>","protected":false},"excerpt":{"rendered":" LED Tri Proof Light in 4 sizes \u2014 2ft (600mm, 30W, 3600 lm), 3ft (900mm, 40W, 4800 lm), 4ft (1200mm, 60W, 7200 lm) and 5ft (1500mm, 80W, 9600 lm). 120LM\/W output, IP66 sealed against dust and powerful water jets, IK10 impact resistant. Aluminum body with PC diffuser, 90 \u00d7 74 mm profile. CCT 2800-6500K, CRI>82, beam 120\u00b0. Wide voltage 110-277VAC for global use. CE, RoHS, SAA, TUV certified. 5-year warranty. Suitable for indoor and fully exposed outdoor mounting.<\/p>","protected":false},"featured_media":13339,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,150],"product_tag":[249,285],"class_list":["post-13354","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-tri-proof-light","product_tag-aluminum","product_tag-ip66","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product\/13354","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/comments?post=13354"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media\/13339"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media?parent=13354"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_brand?post=13354"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_cat?post=13354"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_tag?post=13354"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}