The ILED-COB-480 24V 10MM is a Chip-on-Board (COB) LED tape light designed for continuous, dotless linear illumination in cove, under-cabinet, accent and architectural lighting. The 24VDC-only variant delivers 900 lm per metre at 9 W\/m (100 lm\/W) from 480 COB LED positions packed into a 10 mm wide flexible PCB. Unlike traditional SMD strips that show individual light points, the COB process produces a smooth, continuous line of light \u2014 ideal for exposed coves and direct-view installations.<\/p>\n
Model: ILED-COB-480 24V 10MM
\nLED density: 480 LEDs\/metre
\nPower consumption: 9 W\/m
\nLumen output: 900 lm\/m
\nLuminous efficacy: 100 lm\/W
\nBeam angle: 180\u00b0
\nColour temperature: 2700K \u2013 6000K (warm white to cool white)
\nCRI: >90
\nInput voltage: 24VDC only (this variant)
\nDimmable: Yes
\nPCB width: 10 mm
\nCut length: 50 mm (markings on PCB)
\nStandard roll length: 5 metres
\nCustom lengths: Available on request
\nIP ratings: IP42 (standard), IP65, IP67, IP68 (waterproof variants)
\nWorking temperature: -20\u00b0C to +50\u00b0C
\nCable: 15 cm input cable (custom cable lengths available)
\nAdhesive: 3M yellow tape standard; 3M red tape optional
\nType: Static colour (non-RGB)
\nCertifications: SAA, CE, RoHS
\nAverage lifetime: 50,000 hours<\/p>\n
The COB (Chip-on-Board) process places LED chips directly onto the PCB substrate without individual packaging frames, eliminating the gaps between discrete SMD LEDs that create the familiar “dot pattern” on conventional strip lights. The ILED-COB-480 24V 10MM packs 480 COB LED positions per metre into a 10 mm wide PCB, producing a uniform line of light with no visible light points even at close mounting distances.<\/p>\n
At 9 W\/m and 900 lm\/m, this variant delivers slightly lower output than the 10 W\/m COB-480 (13923) but operates exclusively on 24VDC \u2014 making it compatible with 24V power supplies and controllers without requiring a voltage converter. The 180\u00b0 beam angle provides wide, even wash illumination ideal for cove and backlighting applications where the light needs to spread across a broad surface.<\/p>\n
The ILED-COB-480 24V 10MM is offered in four IP rating variants. The standard IP42 version is suitable for dry indoor environments such as ceiling coves, under-shelf lighting and interior architectural features. The IP65 variant adds a silicone coating that protects against dust and water jets, suitable for covered outdoor use such as soffit lighting and sheltered facades. The IP67 and IP68 variants provide progressive submersion protection \u2014 IP67 for temporary immersion and IP68 for continuous submersion \u2014 for use in fountains, water features and harsh outdoor environments.<\/p>\n
The strip is supplied on 5 metre rolls with a 15 cm input cable pre-attached. It adheres to surfaces using 3M yellow adhesive tape (standard) or 3M red adhesive tape (optional, higher temperature resistance). The flexible PCB can be bent to follow curved contours and cut at the marked 50 mm intervals to achieve custom lengths. Custom roll lengths and cable configurations are available on request. Always verify the cut markings on the PCB before cutting \u2014 cutting between marks will disconnect the circuit.<\/p>\n
The ILED-COB-480 24V 10MM is available in a continuous colour temperature range from 2700K (warm white) to 6000K (cool white), with intermediate options typically available at 3000K, 4000K and 5000K. The CRI >90 rating ensures accurate colour rendering across the full spectrum, making the strip suitable for retail display, gallery accent lighting and food service environments. The strip is dimmable \u2014 confirm compatibility with your intended dimmer (TRIAC, 0-10V or DALI) at order time, as not all COB drivers support every dimming protocol. Being a 24VDC-only variant, this model requires a 24VDC driver \u2014 it is not compatible with 12VDC systems.<\/p>","protected":false},"excerpt":{"rendered":"
The ILED-COB-480 24V 10MM is a dotless COB LED tape light with 480 LEDs per metre on a 10 mm flexible PCB, delivering 900 lm at 9 W\/m (100 lm\/W) from a 24VDC-only input. CRI >90, 180\u00b0 beam angle and 2700K\u20136000K colour range. IP42, IP65, IP67 and IP68 variants cover indoor coves to outdoor waterproof installations. Cut every 50 mm on 5 m rolls with 15 cm cable and 3M yellow adhesive backing.<\/p>","protected":false},"featured_media":13915,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[155,158],"product_tag":[298,305,297,323,296],"class_list":["post-13942","product","type-product","status-publish","has-post-thumbnail","product_cat-cob-led-strip-light","product_cat-strip-and-module-lights","product_tag-cob","product_tag-decorative-lighting","product_tag-dotless","product_tag-interior-lighting","product_tag-tape","first","instock","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product\/13942","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/comments?post=13942"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media\/13915"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media?parent=13942"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_brand?post=13942"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_cat?post=13942"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_tag?post=13942"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}