The ILED-TPR-C M6 is a 4-foot (1200 mm) LED vapour proof luminaire designed for industrial and commercial environments where moisture, dust, and impact resistance are critical. The IP66 rating protects against powerful water jets from any direction, and the IK10 impact rating (20 joules) means the diffuser and housing can withstand direct strikes from heavy objects such as falling tools or forklift masts \u2014 making this one of the most durable options in the ILED-TPR-C range.<\/p>\n
The M6 is offered in three wattages: 20W (3000 lumens), 40W (6000 lumens), and 60W (9000 lumens), all at a rated 150 lumens per watt using LM80-certified LumiLEDs. This is the highest efficacy in the ILED-TPR-C series \u2014 the M11, for example, rates 130 lm\/W, and older M-series triproofs rate 120 lm\/W. CRI exceeds 80, so colours in the space render naturally. The 3CCT switch lets you select 2800K warm white, 4000K neutral white, or 6500K cool white at installation. Input voltage is 220\u2013240VAC at 50\/60 Hz; this is not a universal-voltage model, so 110V regions need a transformer or a different SKU. The power factor is above 0.9. The fixture is Class II double-insulated, so no protective earth is required. The housing is only 74 mm deep \u2014 significantly slimmer than the 105 mm M11 \u2014 which reduces the void space required above the ceiling.<\/p>\n
The M6 comes with a built-in DALI2 driver, enabling individual fixture addressing, scene setting, and integration with building management systems. DALI2 is the second-generation digital addressable lighting interface and is backwards-compatible with DALI-2 standardised profiles, so it works with most contemporary BMS platforms without custom programming. A standby motion sensor is included as standard \u2014 the light activates only when movement is detected, cutting energy in low-traffic zones such as storage aisles and stockrooms. The sensor can be adjusted for detection range and delay time on-site. This combination of DALI2 control and occupancy sensing is uncommon at this price point and is a key reason buyers choose the M6 over comparable products.<\/p>\n
An emergency battery module is available as a factory-installed option. It provides approximately 90 minutes of backup illumination on mains failure, meeting exit-path lighting requirements in many jurisdictions. The emergency module occupies internal space within the housing, so the overall depth remains 74 mm \u2014 no bulkier enclosure is needed. Both DALI2 and emergency are factory-installed; neither can be added after manufacture. For projects requiring emergency illumination, confirm the battery capacity with the sales team before ordering.<\/p>\n
The housing is moulded polycarbonate in gray, with a frosted diffuser that produces a uniform 120\u00b0 beam angle. The slim 74 mm profile is one of the shallowest in the vapour proof category, making installation straightforward even in ceilings with limited void depth. Suspension is via eye-hooks or pendant mount. Cable entry uses sealed gland entries on either end, supporting daisy-chain wiring. The IP66 seal is maintained at each cable entry point, so every connection in the chain remains protected. The PC body resists UV degradation better than painted metal housings when exposed to sunlight through translucent roofing.<\/p>\n
The ILED-TPR-C M6 carries CE, RoHS, SAA, and TUV certifications. SAA is required for Australian and New Zealand installations. TUV coverage extends validity to European and Middle Eastern markets. The standard warranty is 5 years, consistent with other M-series products in the ILED-TPR-C range. For projects requiring extended warranty coverage, contact the sales team before ordering.<\/p>","protected":false},"excerpt":{"rendered":"
The ILED-TPR-C M6 is a 4ft (1200mm) LED vapour proof luminaire rated up to 60W with 150 lumens per watt, delivering up to 9000 lumens in a slim IP66 and IK10 housing. Built-in DALI2 control and standby motion sensor provide precise lighting management, while an optional emergency battery gives 90 minutes of backup illumination. The PC body is only 74mm deep \u2014 shallower than standard vapor tight fixtures \u2014 making it suitable for tight ceiling voids. Available in 20W, 40W, and 60W, with a 3CCT switch covering 2800K to 6500K and CRI above 80.<\/p>","protected":false},"featured_media":15849,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[161,150],"product_tag":[294,295,282,253,293,306,254],"class_list":["post-15862","product","type-product","status-publish","has-post-thumbnail","product_cat-commercial-led-light","product_cat-led-tri-proof-light","product_tag-area-lighting","product_tag-commercial-lighting","product_tag-dali","product_tag-emergency","product_tag-line-lighting","product_tag-linear-lighting","product_tag-sensor","first","instock","featured","shipping-taxable","product-type-simple"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product\/15862","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/comments?post=15862"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media\/15849"}],"wp:attachment":[{"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/media?parent=15862"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_brand?post=15862"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_cat?post=15862"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.iled-lights.com\/zh\/wp-json\/wp\/v2\/product_tag?post=15862"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}