Antique Brass Floor Lamp with Fishing Rod E27 Socket ILED-FR3

The ILED-FR3 is the fishing-rod floor lamp: an iron rod in antique brass or chrome that rises from the base and arcs over, hanging a gold fixture into the position above the chair, the table or the bed. It is the reading and accent lamp for the rooms that want the pendant position without the ceiling wiring — and it is the only floor lamp in the range with an adjustable height.

The two models

The ILED-FR3 28 carries a 20×28cm fixture, adjusts from 145 to 180cm, and suits the 3 to 8 square meter positions — the bedside, the reading chair and the small lounge corner. The ILED-FR3 38 carries a 25×38cm fixture, adjusts from 180 to 200cm, and covers the 5 to 10 square meter rooms — the larger reading positions and the sofa ends. Both share the same rod, the same base and the same E27 socket, so a project mixes them and the pieces read as one design — the small model at the bedside and the large one over the reading chair in the same finish.

The adjustable height

The height is the feature the form exists for: the rod adjusts 145 to 180cm on the smaller model and 180 to 200cm on the larger, so the fixture hangs at reading height over the chair or higher over the table, and re-adjusts when the furniture moves. No fixed lamp gives that range, and no ceiling pendant moves after it is wired.

The fishing-rod arc

The rod rises from the base and curves over like a fishing rod at cast — the antique brass or chrome finish running along the arc — and the fixture hangs at the end of it. That reach is the point: the base stands beside the position while the light lands above it, with no side table displaced and no ceiling wiring pulled.

The E27 socket is the source

The fixture takes a single E27 bulb, and the bulb sets the colour temperature, the brightness and the dimming. A warm 2700K LED at 800 lumens is the reading standard; a dimmable bulb paired with a compatible dimmer gives the evening fade. Because the source is the bulb, an LED upgrade later is a bulb change, not a lamp replacement.

Antique brass or chrome

Two finishes cover the interiors: the antique brass suits the warm and vintage schemes, and the chrome suits the cooler, the modern and the glass-heavy ones. Both run over the iron rod, so the finish holds at close range where the arc passes the eye.

Kur to izmanto

Reading chairs and sofas, where the fixture hangs into the seat at the height the reader needs. Bedsides, where the adjustable height clears the headboard. Hotel rooms and suites, where the antique brass matches the hospitality interiors. And the retail and display corners, where the arc reaches over the merchandise and the finish carries the scheme.

Choosing the bulb for the rod

Three decisions shape the bulb order: the colour temperature against the room, the brightness against the position, and the dimming against how the evening runs. A 2700K LED at around 800 lumens is the reading standard under the fixture; a 4000K bulb covers the study positions. A dimmable bulb paired with a compatible dimmer is the pairing the adjustable height wants — the light changes level as the rod does, and the low end is where the reading lamp does its best work. The E27 range is the everyday bulb shelf, so replacements are an errand rather than an order, and the spare bulb lives in the same drawer as the dimmer.

Why do buyers pick the ILED-FR3 over the alternatives? Here is what we hear from customers:

The height adjusts. 145 to 180cm on the FR3 28 and 180 to 200cm on the FR3 38 — the fixture hangs at reading height over the chair or higher over the table, and re-adjusts when the furniture moves. It is the only floor lamp in the range that does this.

The rod reaches the position. The base stands beside the chair while the fixture hangs above it — pendant position from a floor plug, with no side table displaced.

Two models, two rooms. The FR3 28 for the 3 to 8 square meter corners, the FR3 38 for the 5 to 10 square meter positions, sharing the same design so a project reads as one scheme.

Antique brass or chrome. Two finishes over the iron rod, covering the warm vintage interiors and the cooler modern ones from the same range.

The bulb is the upgrade path. The E27 socket means the colour temperature, the brightness and the dimming all follow from the bulb — an LED upgrade later is a bulb change, not a lamp replacement.

The ILED-FR3 is the fishing-rod lamp for the positions that want the pendant height on the floor: the reading chair, the bedside, the hotel suite and the display corner — with the height adjustable to the seat.

Reading chairs and sofas. The fixture hangs into the seat at the height the reader sets, the warm bulb carrying the evening, and the rod arcs over from a base that stands at the room’s edge.

Bedside positions. The FR3 28 clears the headboard at 145 to 180cm, hanging the light where the book opens instead of glaring from the nightstand.

Hotel rooms and suites. The antique brass matched to the hospitality interiors, the height set per room, and the E27 bulb swapped by housekeeping instead of an electrician.

Retail and display corners. The rod reaches over the merchandise and the finish carries the scheme, with the chrome and brass options covering the two interior directions.

Dining nooks and feature tables. The FR3 38 at 180 to 200cm hangs the light over the table from the floor — the pendant position without the ceiling wiring.