IP65 LED Canopy Lights for Surface Ceiling Gas Station Lighting 40W 60W 80W

The ILED-GS1 is a square LED canopy light engineered for gas station fuel islands, parking structure canopies and industrial ceilings where durable, weather-resistant illumination is essential. Its compact die-cast aluminium housing — just 75 mm deep — mounts flush to the underside of overhead structures, minimising visual bulk while projecting a wide 120° beam downward. The GS1 is offered in three wattage tiers, 40W through 80W, all sharing the same 266×266 mm footprint. Optional DALI control supports daylight harvesting and central dimming strategies for energy-conscious installations and multi-zone fuel island layouts. SAA-certified drivers are available for Australian and New Zealand market compliance.

Tech specs

• Model variants: ILED-GS1 40W, ILED-GS1 60W, ILED-GS1 80W
• Wattage & lumen output: 40W/4,800 lm, 60W/7,200 lm, 80W/9,600 lm — all at 120 lm/W
• Housing dimensions: 266×266×75 mm (all variants share same housing)
• LED source: Lumileds 3030 SMD LEDs
• Beam angle: 120°, uniform downward distribution
• Color temperature: 2800K–6500K (3CCT selectable)
• CRI: >82
• Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
• Power factor: >0.9

• IP rating: IP65 — fully dust-tight, protected against water jets
• IK rating: IK10 — rated for 20 J impact energy
• Control options: Non-dimmable standard; DALI available on request
• Body & finish: Die-cast aluminium housing, white powder-coat
• Mounting: Surface-mounted to ceiling soffit
• Certifications: CE, RoHS, SAA
• Warranty: 3–5 years depending on driver specification

Rugged housing for outdoor canopies

The GS1 uses a die-cast aluminium housing with a white powder-coat finish, providing structural rigidity and corrosion resistance in outdoor and semi-outdoor environments. The IP65 seal prevents dust ingress and protects against water jets from any direction — essential for fuel island canopies exposed to rain, car wash runoff and cleaning chemicals. The IK10 impact rating means the diffuser can withstand accidental impacts from maintenance equipment, vehicle mirrors and debris without cracking or shattering.

The 75 mm housing depth is slim enough to sit flush beneath most canopy soffit panels. The 266×266 mm footprint is compact compared to larger canopy luminaires, making the GS1 suitable for tighter mounting layouts and retrofits where existing drill patterns must be preserved.

Wide voltage and optional DALI control

The GS1 accepts 110–277VAC input, covering both North American (110–120V) and European (220–240V) supply standards without requiring a transformer. This wide-voltage design also tolerates voltage drop along long outdoor cable runs, common at fuel islands and large parking structures.

DALI-enabled variants support stepless dimming and scene control through a DALI bus. In canopy applications, DALI control allows lights to dim when natural daylight is sufficient, reducing energy consumption during midday hours. Multiple GS1 units can be addressed individually or grouped by zone for coordinated dimming across a full fuel island.

The Lumileds 3030 LED engine delivers consistent colour stability and lumen maintenance across all three wattage tiers. CRI above 82 ensures accurate colour rendering for vehicle paint, product packaging and signage under the canopy. The 120° beam angle provides wide, uniform coverage that minimises dark spots between adjacent fixtures.

Why do buyers pick the ILED-GS1 over other canopy lights? Here is what we hear from customers:

IK10 impact rating — built for busy fuel islands. Canopy lights at gas stations are subject to impacts from vehicle mirrors, loading equipment and cleaning tools. The GS1’s IK10-rated housing and diffuser withstand repeated impacts that would crack or deform lesser fixtures, reducing replacement costs in high-traffic locations.

120 lm/W across all three wattage tiers. Every GS1 model — from 40W to 80W — delivers the same 120 lm/W efficacy. There is no efficiency penalty for choosing the highest wattage variant, making whole-station retrofits straightforward to specify.

110–277VAC wide voltage — one SKU for global projects. The dual-range input means the same GS1 unit can be specified for sites in North America, Europe or anywhere in between, without stock splitting between regional variants. This simplifies procurement and reduces spare-part inventory for multi-site operators.

Gas station fuel island canopies. — The primary application. The GS1’s IP65 seal and IK10 impact rating withstand rain, car wash runoff and frequent contact from vehicle mirrors and pump hoses. The 120° beam angle covers multiple fuel bays from a single fixture, reducing the total unit count needed.

Parking structure canopies and car ports. — Covered parking areas benefit from the GS1’s wide voltage input, which tolerates voltage drop along long canopy runs. The white powder-coat finish blends with most architectural cladding, and the low 75 mm profile keeps visual mass minimal beneath structural beams.

Industrial service bays and maintenance sheds. — Workshops and vehicle service areas require durable, high-output lighting that survives tool drops and chemical exposure. The GS1’s die-cast aluminium housing and IK10 diffuser resist both physical impacts and corrosive cleaning agents.

Retail forecourt and drive-through canopies. — Supermarket and convenience store forecourts use the GS1 to illuminate car parks and drive-through lanes. The >82 CRI renders product colours accurately, while the 2800K–6500K range lets operators match existing lighting aesthetics during phased replacements.

Warehouse and logistics dock canopies. — Loading bay canopies need bright, uniform illumination for safe operations and security camera visibility. The GS1’s 120 lm/W efficacy delivers high foot-candle levels at low power, and DALI-controlled zones can dim during off-peak hours.

Wattage vs canopy height. — The 40W variant (4,800 lm) suits canopies under 4 m. The 60W (7,200 lm) covers standard fuel island heights up to 5 m. The 80W (9,600 lm) is recommended for taller canopies or wider bay spacing. Match wattage to mounting height and foot-candle level.

DALI option requirement. — DALI is an optional factory upgrade, not a field-installable add-on. If daylight harvesting or central dimming is required, specify the DALI variant at order. Standard GS1 units are non-dimmable.

Wide voltage site verification. — The GS1 accepts 110–277VAC input, covering both North American (110–120V) and European (220–240V) supply standards. Confirm the local supply voltage — remote canopy points with low voltage may require a dedicated circuit.

GS1 vs GS2 selection. — The GS1 tops out at 80W in a compact 266 mm housing. The GS2 offers higher output (100–240W). Choose GS1 for smaller fuel islands; choose GS2 for wider spans needing higher light levels.

Mounting pattern compatibility. — The GS1’s 266×266 mm footprint differs from legacy canopy lights. Verify mount holes — adapter plates may be needed when replacing older fixtures.