LED Vapour Light 5ft 6ft 4ft Emergency DALI Sensor Wide Optical

The ILED-TPR-C M2 is a single-tube LED vapour-proof fitting designed for industrial and commercial spaces where dust, moisture, and physical impact are everyday concerns. The M2 designation identifies the wide-body version in the ILED-TPR-C range — 110 mm × 80 mm cross-section, IK10 impact rating, and a matching PC diffuser. It comes in three sizes: 600 mm (20W), 1200 mm (40W), and 1500 mm (60W), covering low, medium, and high-output needs from storage corridors to production floors.

Sizes and output

The three sizes step from 2400 to 7200 lumens across the 20W, 40W and 60W models, all delivering 120 lumens per watt through a 120-degree wide-optical diffuser. Colour temperature tunes across 2800K to 6500K, colour rendering is above 80, and the power factor sits above 0.9. The PC body and diffuser are sealed to IP65 and rated IK10 for impact — the top of the standard scale — in a gray finish, and at 110 × 80 mm the cross-section is the widest single-tube in the M-series, which is what the wide optical claim rests on.

The control and sensor options are where the M2 earns its keep: DALI2, 0-10V and TRIAC dimming versions, a built-in PIR sensor with corridor mode, and a 3-hour emergency backup driver are all available as separate variants. Input is 220–240VAC, and the fitting carries CE, RoHS, SAA and TUV with a 5-year warranty.

Installation and maintenance

The M2 is supplied as a complete unit with integrated driver and motion sensor. Surface mounting uses the built-in fixing brackets — two points per fixture, suitable for concrete, timber, and metal ceiling structures. The PC diffuser is pre-fitted and does not require separate handling during installation.

Maintenance is minimal. The sealed PC housing keeps dust and moisture out of the LED compartment. In standard conditions the LED source retains above 80% of initial lumens for the life of the 5-year warranty period. If the motion sensor requires recalibration after installation, a remote controller is used — no access to the driver is needed.

Wide optical

The M2 throws a 120° wide beam instead of a narrow spot, so one fixture covers more floor area than a directional fitting. That is the reason it is specified where you want to reduce the fixture count across a wide warehouse or workshop floor. The PC diffuser spreads the light evenly and cuts the glare a clear lens would leave on work surfaces and screens. It is the wide-body, 110 mm by 80 mm, widest single-tube in the M-series.

Typical applications

The ILED-TPR-C M2 is suited to environments where durable lighting, glare control, and low energy consumption are all required simultaneously. Below are the applications customers specify it for most often, along with the features that make it a practical choice for each one.

Warehouses and distribution centres. — High ceilings, forklift traffic, and narrow aisles make impact resistance essential. The M2’s IK10 rating and 120° wide beam cover a broad floor area from a single unit, reducing the fixture count compared to narrower-beam alternatives.

Manufacturing workshops and light assembly areas. — The PC diffuser reduces glare on work surfaces and screens, while the 120 lm/W output keeps running costs low. Choose DALI2 dimming when the space is shared with automated production lines.

Corridors, stairwells, and service passages. — Corridor mode is the key feature. The motion sensor drops the light to a standby level when no one is present and restores full brightness on detection, cutting energy use without compromising safety.

Retail stockrooms and back-of-house areas. — Staff moving trolleys and stock benefit from the glare-reduced output and the IK10 impact protection that survives the occasional bumped trolley or stacked pallet.

Covered loading bays and sheltered outdoor walkways. — The IP65 seal handles rain driven sideways by wind and the dust kicked up by vehicle tyres. For fully exposed outdoor locations, confirm an IP66-sealed variant with your sales contact.

Agricultural and light industrial buildings. — Vapour-proof construction resists the humidity and occasional wash-down common in dairy, poultry, and food-processing environments. The sealed PC housing is compatible with routine cleaning regimes.

Why do buyers pick the ILED-TPR-C M2 over other vapour-proof battens? Here is what we hear from customers:

IK10 impact resistance — the highest in the single-tube range. Most single-tube vapour-proof lights carry only an IK08 or no IK rating. The M2 is rated IK10, protecting against 20 joules — roughly a 5 kg weight dropped from 400 mm. That matters in warehouses, workshops, and loading bays where fixtures face forklift bumps and falling objects.

Wide 110 mm housing gives the highest single-tube output. The M2’s 110 mm width is the broadest in the single-tube M-series. The extra cross-section supports the 120 lm/W efficacy across all three sizes without thermal throttling. When a project needs high output from a single-tube form factor, the M2 is the default choice.

Built-in motion sensor with corridor mode. The integrated sensor drops the light to a low standby level when the area is empty and restores full brightness on detection. In corridors and storage aisles this cuts energy use without sacrificing safety.

Warehouses and distribution centres. — High ceilings, forklift traffic, and narrow aisles make impact resistance essential. The M2’s IK10 rating and 120° wide beam cover a broad floor area from a single unit, reducing the fixture count compared to narrower-beam alternatives.

Manufacturing workshops and light assembly areas. — The PC diffuser reduces glare on work surfaces and screens, while the 120 lm/W output keeps running costs low. Choose DALI2 dimming when the space is shared with automated production lines.

Corridors, stairwells, and service passages. — Corridor mode is the key feature. The motion sensor drops the light to a standby level when no one is present and restores full brightness on detection, cutting energy use without compromising safety.

Retail stockrooms and back-of-house areas. — Staff moving trolleys and stock benefit from the glare-reduced output and the IK10 impact protection that survives the occasional bumped trolley or stacked pallet.

Covered loading bays and sheltered outdoor walkways. — The IP65 seal handles rain driven sideways by wind and the dust kicked up by vehicle tyres. For fully exposed outdoor locations, confirm an IP66-sealed variant with your sales contact.

Agricultural and light industrial buildings. — Vapour-proof construction resists the humidity and occasional wash-down common in dairy, poultry, and food-processing environments. The sealed PC housing is compatible with routine cleaning regimes.

Stock management. — One M2 SKU covers 600 mm, 1200 mm, and 1500 mm lengths with the same 110 × 80 mm profile. Specifying all three sizes together simplifies reordering and reduces SKUs your warehouse holds.

Motion sensor set-up. — The sensor detection range, time-out, and lux threshold are adjustable with a remote controller. Set these values before the fixture is fixed to the ceiling so you do not need a ladder to re-adjust after installation.

Emergency version availability. — Not all M2 variants include the 3-hour emergency driver. Specify “emergency” or “self-test” when ordering if your project requires certified escape lighting.

IK10 vs M3 comparison. — The M2 carries an IK10 rating — the highest in the single-tube M-series. If your project does not require IK10, the M3 or M1 may be a more cost-effective choice while still offering the same IP65 rating and dimming options. Warranty. The M2 carries a 5-year warranty, longer than standard for a fitting of this class, which suits the long-service life of a sealed vapour-proof unit.