Simple Chandelier Pendant Fixtures with LED Lighting Source ILED-PD4

The ILED-PD4 is the simple pendant: a resin body moulded into a chandelier silhouette, a single bulb socket inside, and a drop cord. It is the fixture for the positions that want the chandelier read without the chandelier project — the café booth, the small dining table, the bedroom corner, the restaurant bay that needs a fitting every two metres.

The four sizes

The range runs from the Model1 at Φ22×24cm, which takes a single G9 bulb and hangs as a small cluster piece, up through the Model2 at Φ35×40cm and the Model3 at Φ42×46cm, both on E27 sockets, to the Model4 at Φ55×60cm, which is the dining-table size. Because the four sizes share the same shape and material, a restaurant can run the small models over the window bar and the large model over the feature table, and the fittings read as one design rather than a collection.

Resin, and why it works here

The body is resin, which is what lets the chandelier silhouette come this small and this light. A metal or crystal chandelier at Φ22cm would be fragile and fiddly; resin holds the moulded detail, weighs little, and survives the cleaning and the transport that a restaurant fixture lives with. It is the practical material for the price point and the positions this range aims at.

The bulb is the source

Each fixture takes one bulb — a G9 in the smallest model, an E27 in the other three — and that bulb sets the colour temperature, the CRI and whether the pendant dims. A warm 2700K LED gives the restaurant evening; a neutral bulb gives a brighter read for a kitchen or a retail counter. Confirm the bulb type and its dimming behaviour at order time, because those live in the bulb, not the fitting, and pair the bulb with a compatible dimmer if the evening setting matters.

Installation

The fixture hangs on a drop cord from the canopy, set to the height the position needs. Because each fixture takes a single bulb, the wiring is the simple pendant procedure: fix the canopy, wire the cord, screw in the bulb. Have the wiring done by a licensed electrician, and confirm the supply requirements for your market at order time. The fixture is a dry-indoor fitting aimed at restaurant and residential positions; a bathroom or any wet or splash position is past its rating, and the resin body wipes with a damp cloth, which is part of why the material suits the trade.

Var den används

Restaurant tables and bays, where a row of small pendants runs the length of the counter and each table gets its own pool of light. Residential dining corners and bedrooms, where the Model1 and Model2 sizes suit the smaller rooms. Café booths and window bars, where the pendants mark the positions without a big fitting over every table. And retail and salon corners, where the chandelier silhouette adds the read without the weight or the budget of a crystal piece.

Specifying the pendant

Three decisions shape the order: the size against the table or the position, the bulb against the light the room needs, and the drop height against the ceiling. Because the fixture is the silhouette and the bulb is the source, the same fitting serves a warm dinner service and a brighter working morning with nothing changed but the bulb. Measure the drop before ordering, space the row against the counter, and the fit-out is a day’s work rather than a project. The resin finish reads as the moulded detail it is, so the model suits the positions where the silhouette matters more than the close-range material of a metal or crystal chandelier.

Why do buyers pick the ILED-PD4 over the alternatives? Here is what we hear from customers:

Chandelier shape without the chandelier project. The resin body carries the moulded detail at a fraction of the weight, which makes the fixture easy to hang, easy to clean and easy to ship in quantity for a restaurant fit-out.

Four sizes that read as one design. The small G9 model over the window bar and the large E27 model over the feature table pull from the same shape, so the room reads as one scheme rather than a mix of fittings.

One bulb per fixture. The single G9 or E27 socket keeps the maintenance to a ten-second swap, and the bulb choice sets the colour temperature, the CRI and the dimming per position.

Right-sized for small positions. The Φ22cm and Φ35cm models are the sizes most ranges skip, and they are the ones a café or a bedroom actually needs.

The resin survives the trade. Restaurant fixtures get wiped, bumped and transported; resin takes that life without the chips and the dents that break the look on softer materials.

The ILED-PD4 is the small pendant for the positions that want the chandelier read at the pendant budget: restaurant tables, café booths, residential corners.

Restaurant tables and bays. A row of Model2 or Model3 pendants along the counter or over each bay, one bulb each, spaced so every table gets its own pool of light from its own fitting.

Café booths and window bars. The Model1 and Model2 sizes run the length of the window, marking the positions without a big fitting over every seat, and the resin wipes clean after the morning rush.

Residential dining corners. The Model4 over the table or the Model2 over the breakfast nook, one bulb each, with a dimmable bulb for the evening setting.

Bedrooms and reading corners. The Model1 G9 pendant as the small ceiling piece, hung at the corner of the room where the table lamp does the task and the pendant does the read.

Retail and salon corners. The chandelier silhouette over the counter or the display, adding the read without the weight or the budget of a crystal piece, and wiping clean between the trading days.