The The 1200 x 300 LED Panel Light (ILED-PL12030-A) is a slim edge-lit rectangular panel designed for linear ceiling applications where even, glare-controlled illumination is needed. The elongated form covers more ground per fixture than square panels, reducing the total count and cabling for corridors, walkways and long rooms. The 11mm depth hides cleanly in suspended ceilings without dropping the visual plane.
ข้อมูลทางเทคนิคโดยสรุป
The ILED-PL12030-A runs at 40W and produces 4000 lumens from an 1195 x 295 x 11mm panel, delivering 100-110 lumens per watt. The edge-lit PMMA light guide spreads light across the full surface with a 120° beam angle. Three fixed colour temperatures are selectable at installation: 2800K warm white, 4000K neutral, and 6500K cool white. Colour rendering is above 80. Standard UGR is 22; an optional <19 low-glare version is available for office and computer-use environments. The panel carries an IP42 rating — protected against solid objects larger than 12.5mm and against dripping water from above. It is not rated for damp or wet locations.
การประกอบและติดตั้ง
The housing is aluminium with a white or silver finish. The diffuser is anti-UV PMMA, treated to resist yellowing over time. The integral driver is sealed inside the housing — no external ballast or power supply is needed. Installation is direct wiring to 220-240VAC or 110-277VAC 50/60Hz mains, controlled by a standard wall switch or circuit breaker. The panel mounts into standard T-grid ceiling tiles, recessed into a cutout, or surface-mounted with the supplied brackets. The 11mm profile sits almost flush with the ceiling plane.
Control options
This is a standard non-dimmable panel. It switches on and off with the circuit — no dimming, DALI, or sensor control built in. For applications that require dimming or smart control, order the DALI or emergency variants from the same series instead.
ในกล่องมีอะไรบ้าง
Each unit ships as a single panel with the integral driver pre-wired and mounting brackets included. No separate transformers, controllers, or drivers are packed inside — the fixture is ready to wire direct to mains. The anti-UV PMMA diffuser is factory-fitted and should not be removed after installation.
สิ่งที่คุณต้องเตรียมมา
Standard ceiling cutout or T-grid tile space matching the 1195 x 295mm panel size. A circuit breaker or wall switch for on/off control. No special tools beyond a screwdriver and wire strippers are required for installation.
สถานที่ที่ใช้
This panel is built for interior ceiling mounting in commercial and institutional buildings. Linear corridors and walkways benefit from the elongated form — fewer fixtures cover the same distance compared with square panels. Office spaces and meeting rooms use the standard UGR 22 rating, or the optional <19 low-glare version for screen-use environments. Retail back-of-house areas, storage rooms and stairwells take advantage of the straightforward on/off control and IP42 dust protection. The 3CCT option lets a single SKU serve both warm-white hospitality aesthetics and cool-white task lighting needs across the same project.
Certifications and warranty
The ILED-PL12030-A carries CE marking and RoHS compliance. The warranty period is three to five years depending on the region.
Lifespan and maintenance
The LED array is rated for extended operation with lumen maintenance above the typical decay curve for commercial panel lights. The sealed driver and gasketed diffuser mean no routine cleaning of internal components is required — occasional external wiping of the diffuser face with a damp cloth is sufficient.
