The ILED-IG3 is a round, decorative in-ground light that you set into the ground, where it throws a tight beam of light. The point of it is that you choose where the light lands. It can shine straight up, or out through one, two or four sides of the body, which makes it the pick for a garden, a path or a low wall where you want to aim the light rather than just have it point up.
Teknik özellikler bir göz atında
The light is a 62mm round body at 1 to 3W, and it puts out 85 to 90 lumen per watt through a 30 degree beam. It is available as a white from 2800K to 6500K, or as red, green or blue. The body is 304 stainless steel with a tempered glass top, sealed to IP67 or IP68, and it runs on 12V or 24V, DC or AC. It is certified to CE and RoHS, with a 2 year warranty.
Four ways the light comes out
The range is built around the direction of the light. The plain ILED-IG3 shines up, in the direct style. The ILED-IG3 A lights out through one side. The ILED-IG3 B lights out through two sides, and the ILED-IG3 D lights out through four sides. All four share the same 62mm body, the same 1 to 3W range and the same 56mm cut hole, so the only thing you choose is where the light goes.
Where the side light is useful
The side-lighting options are the point of the range. A one-side version sits against a low wall or a border and lights one face. A two-side version sits in the middle of a path and lights both edges at once. A four-side version lights out in all directions, which suits a light on a flat plaza or a lawn where you want the glow to spread around it. Choose the sides to match the spot it sits in.
IP67 veya IP68
The seal is IP67 or IP68, so it handles not just rain but standing water, which is the point of a buried light. The IP68 version is for a low, wet spot that holds water, and the IP67 version is enough for a normal ground level.
Beyaz ve renkli
The light is available as a white, from 2800K to 6500K, or as red, green or blue. A warm white is the everyday pick for a home garden or a path, a cooler white reads brighter for a public walkway, and the red, green and blue are for a decorative line that should read as a colour. Pick the one that suits the site.
İnşa ve malzemeler
The body is 304 stainless steel around a tempered glass top, which keeps it solid in the ground where water and foot traffic are both on it. The stainless steel resists the corrosion a buried fixture gets, and the tempered glass spreads the light and holds the lens.
Kutunun içinde neler var
Each unit ships as a single in-ground light, with the stainless steel body, the tempered glass top and the cable for the supply. You choose the light direction, the size within the 1 to 3W range and the light colour when you order it, and you set it into the ground where you want it.
Sizin sağlaymanız gerekenler
You will need to wire it to a 12V or 24V supply, DC or AC to match the version you ordered, and set it into the ground on a solid base. Because it sits in the ground, you will run the cable back to the supply and keep the connection dry, and you will cut the 56mm hole in the surface it sits on.
Nerede kullanılır
As a decorative in-ground light it shows up on garden paths and borders, along a driveway edge, on a low wall and in a plaza or a public walkway. The side-lighting options make it the pick where you want the light to aim at a wall or a border rather than just point up, and the stainless steel build is the reason it is used where it will get water and foot traffic.
Güvenilirlik ve termal özellikler
It draws only 1 to 3W, so it is a small, efficient accent that stays cool. The 304 stainless steel body keeps it solid in the ground where water and foot traffic are on it, and the IP67 or IP68 seal keeps the weather out, so it is built to stay in the ground for years. It is certified to CE and RoHS, with a 2 year warranty.
