Halo LED Bulkhead Light Round Benz Tri Guard 300mm

The ILED-BH-R20W TL is the Tri Guard variant of the Halo round 300mm bulkhead series. The Tri Guard cover is a reinforced polycarbonate shell mounted over the standard diffuser, giving the fixture an extra layer of impact protection without reducing light output. This makes the TL model the natural choice for environments where balls, tools, or deliberate impact pose a realistic threat.

Tech specs at a glance

The ILED-BH-R20W TL is available in two wattage options. The 20W version delivers 2200 lumens. The 30W version delivers 3300 lumens. Both produce 110 lumens per watt from the same Ø300×90mm die-cast aluminium housing. Input is 220-240VAC or 110-277VAC 50/60Hz, so the fixture works in most regions without a transformer. The colour temperature range is 2800K to 7000K — covering warm white, neutral, and cool white — selectable at installation. Colour rendering is above 82. The beam angle is 120°, spreading light evenly across the ground plane. The integrated Benz Tri Guard polycarbonate cover is mounted slightly proud of the housing face; it protects the inner diffuser from ball strikes and impact while transmitting light with minimal loss. The die-cast aluminium body is IP65 rated — dust-tight and protected against water jets from any direction — and IK10 rated, the highest impact resistance level for lighting equipment.

Build and installation

The housing is die-cast aluminium with a professional powder-coated finish in white, black or silver gray. The inner diffuser is anti-UV polycarbonate. The outer Tri Guard cover is a separate reinforced polycarbonate shell that fits over the inner diffuser and snaps into the housing rim. The gasketed seal between the housing and the outer cover maintains the IP65 rating even with the protective layer in place. The integral driver is sealed inside the housing — no external ballast or separate power supply is needed. Wiring is direct to mains through the terminal block. Electrical classification is Class I, requiring a protective earth connection. The fixture can be surface-mounted to a flat wall or ceiling using the four mounting points on the back plate.

Control options

This is a standard non-dimmable, non-controlled bulkhead. It switches on and off with the circuit — wall switch, timer, or external sensor. For projects that require DALI dimming, motion sensing, or self-test emergency, order the DALI or emergency variants from the Halo round 300mm series instead. These variants share the same mounting footprint and dimensions but use different internal drivers.

Những gì có trong hộp

Each unit ships as a single bulkhead with the driver pre-installed, the Tri Guard cover pre-fitted, mounting hardware included and the terminal block ready for connection. The selected colour temperature switch is factory-set — confirm the required setting before ordering, as it cannot be changed after the housing is sealed. No separate controllers, transformers or drivers are packed inside — the fixture is ready to wire direct to mains.

Những gì bạn cần cung cấp

A circuit breaker or wall switch for on/off control. A mounting surface suitable for the fixture weight. For outdoor installations, confirm the mounting location is within the IP65 protection zone and that the seal remains intact after installation. No special tools beyond a screwdriver and wire strippers are required.

Nơi được sử dụng

The ILED-BH-R20W TL is built for locations where the standard bulkhead would not survive repeated impact. Schools and universities use the Tri Guard cover in corridors, playgrounds and sports halls where balls and airborne objects regularly strike walls and ceilings. Transit stations — metro platforms, bus terminals and rail concourses — benefit from the IK10 rating and the reinforced cover, which resist both accidental impact and deliberate tampering. Correctional facilities specify the TL variant for the same reason: the double-layer polycarbonate construction holds up under conditions that would shatter a standard diffuser. Sports facilities, including indoor basketball courts and climbing centres, use the Tri Guard version in perimeter lighting positions where stray balls are a constant risk. Car park columns and loading bay walls also see heavy impact from vehicles and goods, making the TL model the practical choice over the standard R20W.

Chứng nhận và bảo hành

The ILED-BH-R20W TL carries SAA, CE, RoHS and TUV certifications. SAA approval covers Australian and New Zealand market requirements. TUV certification provides additional European safety verification. The warranty period is three to five years depending on the region and distributor terms.

Vì sao người mua chọn những sản phẩm này thay vì các lựa chọn khác? Đây là những gì chúng tôi nghe được từ khách hàng:

Double-layer impact protection. The Benz Tri Guard cover sits over the standard diffuser as a second protective shell. Unlike a single IK10-rated diffuser, the TL design gives two layers of polycarbonate between the environment and the LED source — one layer absorbs the initial strike, the inner diffuser continues to transmit light.

Same dimensions as the standard R20W. The TL cover adds only a few millimetres of projection. It fits the same Ø300×90mm housing and mounting pattern as the base model, so specifiers can upgrade to Tri Guard protection without changing ceiling cutouts, wiring, or mounting brackets.

IK10 impact rating with IP65 sealing. The die-cast aluminium body is IK10 rated — the highest impact resistance level for lighting equipment — and IP65 sealed. This combination is rare in the bulkhead category and is why the TL model is specified for transit stations, schools and correctional facilities.

The Halo LED Bulkhead Light with Tri Guard (ILED-BH-R20W TL) is designed for wall and ceiling mounting in interior and exterior locations where impact resistance is a primary requirement.

Schools and universities. Corridors, playgrounds and sports halls in educational buildings are high-risk environments for ball strikes and airborne objects. The Tri Guard cover protects the inner diffuser from repeated impact, and the IP65 seal handles normal indoor dust. The 3CCT option lets specifiers match warm-white common areas with cool-white study corridors from the same SKU.

Transit stations and transport hubs. Metro platforms, bus terminals and rail concourses combine high footfall with intentional and accidental impact. The IK10-rated housing and double-layer Tri Guard cover resist both ball strikes and deliberate tampering. The IP65 seal handles washdown cleaning in station environments.

Correctional facilities. Prisons and detention centres require lighting that withstands deliberate impact and vandalism. The TL variant’s reinforced cover and IK10 housing meet these demands while the IP65 seal prevents moisture ingress in high-humidity cells and common areas.

Sports facilities. Indoor basketball courts, climbing centres and multi-purpose sports halls generate constant ball activity near perimeter walls and ceilings. The Tri Guard cover absorbs ball strikes that would crack a standard bulkhead diffuser. The 120° beam angle spreads light evenly across the playing surface from perimeter mounting positions.

Một vài điều cần kiểm tra trước khi đặt hàng:

Tri Guard cover projection. The outer cover sits slightly proud of the housing face, creating a visible concentric ring profile. Confirm this aesthetic is acceptable for the installation location — it is more prominent than the standard R20W diffuser.

Wattage selection. The 20W version delivers 2200 lumens; the 30W version delivers 3300 lumens. Choose based on the illumination level required — 20W for quieter corridors and low-traffic areas, 30W for high-traffic zones and larger spaces.

Colour temperature. Three fixed settings are available at installation: 2800K warm white, 4000K neutral and 6500K cool white. Set the switch before closing the Tri Guard cover — it cannot be changed after installation.

Mounting type. The fixture can be surface-mounted to any flat wall or ceiling. Confirm the mounting surface can support the fixture weight and that the IP65 seal remains intact after installation.