The ILED-TL-E is a track spotlight for places where you want to aim light at specific objects instead of just filling a ceiling. There are three sizes in the range, all running at 100 lm/W. The ILED-TL-E2 is 15W, 1500 lumens, a 70mm body. The ILED-TL-E4 is 30W, 3000 lumens, 90mm. The ILED-TL-E6 is 40W, 4000 lumens, 110mm. The three sizes share the same zoomable lens, the same 3CCT switching and the same built-in driver, so a project can mix sizes on one track and the beams all behave the same way. That is the point of the range: pick the wattage for how much light a spot needs, and set the lens for how wide you want it to spread.
The zoomable lens
The lens barrel rotates by hand to change the beam from a 10° tight spot to a 60° wide wash. That is the main difference between this and a fixed-optic track light, where you order a 15° lens or a 36° lens and are stuck with it. Here you set the spread at the bench or on the ceiling, and you can re-aim it later when the display or the furniture moves. For a gallery, that means the same fixture can run a tight beam on a single frame and a soft wash over a whole wall of work without swapping hardware. For a shop, it means the same head can spotlight a product and open up to cover a display counter.
Light source and color
The source is a Citizen or CREE COB, so the light comes out of one flat panel rather than a ring of smaller LEDs. Standard color rendering is CRI 92, which is fine for most retail and general accent work. A CRI 97 version is available as an option, which matters when the light is on art, fabric or skin and the color has to hold up without a white balance correction. Color temperature is 3CCT, with 2800K, 4000K and 6500K set by a switch on the body. Set it at the bench before the fixture goes on the track; it is easier than climbing to the ceiling to flip the switch later.
Carcasa y fijación
The body is extruded aluminum, finished in white or black. The driver is built into the body, so there is no separate driver box to find a place for on the track or in the ceiling. The fixture clips to a standard 3-phase or single-phase track, and the body color matches whichever rail you are running. Dimensions across the range are compact: 70mm, 90mm and 110mm body diameters, with lengths from 145mm to 200mm. Class I wiring, so it needs a proper earth connection. Input is 220-240VAC or the wide 110-277VAC version depending on the market, and the IP42 rating means it is for dry indoor ceilings, not a wet or outdoor position.
Elegir la talla
The three wattages split by how much light the spot needs. The 15W E2 is for a single accent point, one artwork, a reading lamp position, a small display. The 30W E4 is the workhorse for a retail counter, a group of displays or a wider wash. The 40W E6 is for large rooms, high ceilings or a wide wash where you need the extra output without adding another head to the track. Because all three zoom over the same 10° to 60° range, the beam shape does not change with the wattage; you are choosing the light level, not the optic.
Dónde se utiliza
Art galleries and museums, where a tight CRI 97 spot on a single piece sits next to a wide wash over a wall of work, all from the same lens. Retail and mall lighting, where a counter, a mannequin group or a feature wall each need a different beam width from the same track. Hospitality, where a restaurant table, a bar back or a reception wall are accent lit with a tight spot and the floor plan gets a wider wash. Exhibition and trade shows, where the layout changes between shows and the zoomable lens means the same heads are re-aimed instead of a new set of optics being ordered for each event. And residential, where a piece of art, a shelving unit or a reading chair gets a focused spot without a row of fixed downlights cutting into the ceiling.
