Tira de luces LED flexible de 12 V CC y 24 V CC, con LED SMD 2835, 60 unidades por metro

The ILED-FX-2835 60 is a flexible LED strip built around the SMD 2835 package at 60 LEDs per meter, offering white light in three temperatures. It sits in the middle of the 2835 range: brighter and denser than a low-count accent strip, but not as intense as the 120 piece version. That makes it the everyday workhorse for ambient and accent lighting where you want a clean, even white.

Resumen de las especificaciones técnicas

The strip runs on 12VDC or 24VDC, draws 8 to 12W per meter and puts out 800 to 1,200 lumen per meter with a 120 degree spread. Colour rendering is CRI above 80 as standard and above 90 on request. Each piece ships as a 5 meter roll, 8mm wide, cuttable in 25mm steps.

Why 60 LEDs per meter

Density decides how bright and how even the light is. At 60 LEDs per meter the strip gives a smooth, shadow-free line without the very high output of the 120 piece version, which suits coves, under-cabinet runs and ambient lighting better. It also draws less power than the denser strip, so it is easier to feed along a long line.

Dual voltage: 12V or 24V

You can have this strip on 12V or 24, and that is the main reason installers reach for it. A 12V version is simple and pairs with the small transformers used for short cove and cabinet runs. A 24V version drops less voltage down a long line, so it stays even when you are stringing it far, which is why 24 is the pick for long corridors and bigger rooms. Choose the voltage that fits your supply and the length of the run.

Choosing a white

This is a static white strip, so each piece is one temperature, not a mix. The three options are warm white for a soft, cosy look in living areas, commercial white for a balanced, general-purpose tone in work and shop spaces, and cool white for a brighter, cleaner light where visibility matters. Pick one before ordering; the strip cannot change temperature on the fly.

Opciones de certificación IP

La misma tira se ofrece con cuatro niveles de protección. IP20 es para lugares secos en interiores, como cañones o armarios. IP65 está preparado para exteriores cubiertos y zonas húmedas como cornisas y fachadas. IP67 e IP68 son para donde la tira se moja por completo o está expuesta a un aire costero adverso. Ajusta el nivel a la ubicación, no el más alto de la lista.

Fabricación e instalación

The strip cuts cleanly in 25mm steps, so you trim it to fit instead of bending a longer piece. It is backed with 3M yellow double-sided tape, and a 3M red tape is available on request. A 15cm input cable is fitted to the leading end, and connector cables can be customized to a different length or plug. At 8mm wide it disappears into most coves and channels.

Contenido de la caja

Cada pedido se envía con la tira en un rollo de 5 metros, la cinta de montaje amarilla 3M y el cable de entrada de 15 cm en el extremo de conexión. Los largos personalizados se cortan bajo pedido del mismo rollo.

Lo que debes aportar

You will need a power supply at 12VDC or 24VDC, matched to the strip version, sized for your total meters. For dimming, a compatible LED dimmer is available. If you are not hard-wiring, use an adapter or driver that matches the strip voltage.

Dónde se utiliza

As a mid-density white strip it shows up in cove and ceiling lighting, under-cabinet and under-bed zones, picture and window lighting, and general task lighting. Outdoors the IP65 and above versions handle eaves, facades and garden edges. The three white temperatures make it useful across homes, shops and offices.

Vida útil y fiabilidad

The SMD 2835 LEDs carry a 50,000 hour rated life, which at normal use is well past a decade. There are no moving parts and no fan, so the strip does not fail through heat. It works from -20 C to 50 C, and because it draws sensible power it stays cool even in tight, low-ventilation installs.

Here is what installers tell us they like about the 60 piece 2835 strip:

Dual voltage choice. You can order it on 12V or 24, so short runs stay simple and long runs stay even. That one feature saves you from guessing a supply later.

White only, no controller. It is a static strip, so there is no addressing to set up. You power it and it runs the one temperature you chose, which keeps the job clean.

Corte a la longitud exacta. El paso de corte de 25 mm significa que recortas la tira para que encaje en lugar de desperdiciar metros o doblar una pieza que no se acostará plana.

Pick the protection rating. IP20 through IP68 are all on the same strip, so you choose the rating for the location rather than ordering a different product.

Lista para pegar. La cinta amarilla de 3M se encuentra en la parte posterior como estándar, por lo que la mayoría de las instalaciones interiores no necesitan ningún otro método de montaje.

Three white temperatures. Warm, commercial and cool white cover most ambient and task jobs without going to a different strip.

Mid-density white strips like this one are used in a lot of everyday settings:

Ceiling coves and indirect lighting. Running the strip in a cove line gives an even, shadow-free glow with no visible source. It is the classic pick for bedroom, lounge and office accent coves that need to stay consistent and soft along a whole wall.

Under-cabinet and under-bed. The output is enough to light a worktop, counter or reading zone, and the narrow 8mm body tucks away out of sight so the light is what you see, not the fixture itself.

TV, mirror and furniture backlight. A warm white strip behind a TV, mirror or cabinet edge adds depth and soft ambient light to a room without a direct light source.

Arquitectónico y fachada. With IP65 and above, the strip outlines eaves, columns, canopies and garden edges outdoors, weatherproof but still subtle.

Shop and office task lighting. Commercial white gives a neutral, general-purpose light for display areas, counters and work zones where clear visibility is wanted all day long.

Simple signage and marker lines. A fixed warm or cool white strip marks edges, steps or counters where a steady, unchanging light is exactly what the design calls for.

Algunas cosas que hay que comprobar antes de realizar el pedido:

Pick the voltage first. Choose 12V for short, easy runs and 24V for longer lines, and buy the matching power supply. Mixing them up is the most common cause of a strip that will not run.

Remember it is white only. The strip is static and comes in warm, commercial or cool white, one temperature per piece. If you need changing colours, that is the addressable RGB range, not this one.

Adecúe la certificación IP al lugar de instalación. IP20 es solo para interiores secos. Use IP65 para exteriores cubiertos y zonas húmedas, y IP67 o IP68 para exposición total o condiciones extremas.

Plan the cut and joins. Cut on the 25mm marks and keep a little length in reserve. For wet locations, seal every cut and joint with silicone after you wire it.

Aliméntese los ejecuciones largas desde ambos extremos. Even a 60 piece strip benefits from power at each end on a long line, so the middle does not dim.