Modern Standing Floor Light with Two Balls ILED-FR5

The ILED-FR5 is the two-ball floor lamp: an iron stem in gold brass, 165cm tall, carrying two glass ball lights with the LEDs built in — one set higher, one lower — so the corner reads as a composition of light rather than a lamp with a shade. It is the decorative piece for the 8 to 15 square meter living rooms, and the integrated LEDs mean there is nothing to buy, store or change for the life of the fitting.

The two balls

The two glass balls sit at different heights on the stem, and that separation is the design: the lower ball carries the corner glow, the upper one reads over the sofa line, and together they look like a sculpture with the light inside it. Each ball runs an integrated 5W LED — 10 watts for the pair — which is accent and atmosphere brightness for a living-room corner rather than a work-light output. The glass diffuses the LED points into one warm sphere per ball, so the light reads clean from any angle in the room. The two heights also do different jobs: the lower ball lights the floor edge and the furniture, the upper one lifts the corner above the sofa line — which is why the composition holds the corner in a way a single-ball lamp does not.

Gold brass on iron

The stem and the frame are iron, finished gold brass — the warm metallic that suits the velvet, the dark wood and the cream walls. At 165cm this is the tallest floor lamp in the range, and the footprint is the corner-sized one that fits beside the sofa without crowding it. The gold brass is the single finish the range runs, and it is the finish that suits the hospitality interiors and the warm residential schemes.

Integrated LEDs

The LEDs are built into the ball lights, so there are no bulbs to buy, no spares to store and no ladder climbs when a light fails. The trade-off is honest: the sources are part of the fitting, so the whole lamp is the warranty item rather than a bulb. For a decorative corner piece that runs its evening hours on a switch, that trade is the reason the fixture is this clean.

Installation and care

The lamp assembles from the base, the stem and the two ball lights, and it plugs into the nearest wall socket — no wiring and no electrician. The iron stem and the glass balls wipe with a dry cloth. The lamp is a dry indoor decorative fitting; it is not a bathroom or outdoor product. The assembly is the same three-part procedure the range follows — base, stem, ball lights — and the whole job runs from the nearest wall socket, which is why the lamp moves between rooms as the furniture does.

Where it gets used

Living-room corners and sofa ends, where the two-ball composition is the piece the corner was missing. Bedrooms and dressing areas, where the gold brass matches the warm linens. Hotel lounges and reception areas, where the design read matters as much as the light. And the retail and display corners, where the composition draws the eye and the LED sources run without a maintenance cycle.

Positioning the composition

Two decisions shape the placement: the corner against the 165cm frame and its footprint, and the socket against where the plug lands. The two balls read best where the eye passes them at seated height — beside the sofa, at the end of the reading corner, in the entrance sight line — and the stem stands where the furniture leaves room. Plan the socket position at the same time as the corner, because the composition is fixed once the base is set, and the lead reaches the supply rather than the other way round.

Why do buyers pick the ILED-FR5 over the alternatives? Here is what we hear from customers:

Two balls, two heights, one composition. The lower ball carries the corner glow and the upper one reads over the sofa line — a designed piece rather than a lamp on a stick, which is what the modern interiors are buying.

Integrated LEDs, nothing to maintain. The 5W sources are built into the glass balls — no bulbs to buy, no spares to store, no ladder climbs when a light fails.

The tallest stem in the range. 165cm puts the composition at the height the living-room corners need, over the sofa line rather than below it.

Gold brass over iron. The finish is over metal, so it holds at close range in the velvet and dark-wood interiors the colour suits.

The accent level is the point. Ten watts for the pair is the corner-and-atmosphere brightness the decorative position wants — the room’s working light comes from the ceiling.

The ILED-FR5 is the two-ball composition for the corners that want the light and the sculpture in one piece — the decorative floor lamp of the range.

Living-room corners and sofa ends. The two balls at two heights carry the corner glow, one reading over the sofa line and one filling the seat, with the gold brass against the sofa fabric.

Bedrooms and dressing areas. The composition beside the wardrobe or the window, the warm glass glow low on the evening switch.

Hotel lounges and reception areas. The gold brass matched to the hospitality fit-out, the integrated LEDs removing the bulb-change cycle from housekeeping, and the design doing the welcome.

Retail and display corners. The composition draws the eye to the corner and the glass balls light the display — a fitting that is the merchandising as much as the light.

Entrance and hallway positions. The two balls marking the entry at the heights the eye passes, running from the nearest socket with nothing to maintain.