The ILED-GS1 is a square LED canopy light engineered for gas station fuel islands, parking structure canopies and industrial ceilings where durable, weather-resistant illumination is essential. Its compact die-cast aluminium housing — just 75 mm deep — mounts flush to the underside of overhead structures, minimising visual bulk while projecting a wide 120° beam downward. The GS1 is offered in three wattage tiers, 40W through 80W, all sharing the same 266×266 mm footprint. Optional DALI control supports daylight harvesting and central dimming strategies for energy-conscious installations and multi-zone fuel island layouts. SAA-certified drivers are available for Australian and New Zealand market compliance.
Tech specs
- Model variants: ILED-GS1 40W, ILED-GS1 60W, ILED-GS1 80W
- Wattage & lumen output: 40W/4,800 lm, 60W/7,200 lm, 80W/9,600 lm — all at 120 lm/W
- Housing dimensions: 266×266×75 mm (all variants share same housing)
- LED source: Lumileds 3030 SMD LEDs
- Beam angle: 120°, uniform downward distribution
- Color temperature: 2800K–6500K (3CCT selectable)
- CRI: >82
- Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
- Power factor: >0,9
- IP rating: IP65 — fully dust-tight, protected against water jets
- IK rating: IK10 — rated for 20 J impact energy
- Control options: Non-dimmable standard; DALI available on request
- Body & finish: Die-cast aluminium housing, white powder-coat
- Mounting: Surface-mounted to ceiling soffit
- Certifications: CE, RoHS, SAA
- Warranty: 3–5 years depending on driver specification
Rugged housing for outdoor canopies
The GS1 uses a die-cast aluminium housing with a white powder-coat finish, providing structural rigidity and corrosion resistance in outdoor and semi-outdoor environments. The IP65 seal prevents dust ingress and protects against water jets from any direction — essential for fuel island canopies exposed to rain, car wash runoff and cleaning chemicals. The IK10 impact rating means the diffuser can withstand accidental impacts from maintenance equipment, vehicle mirrors and debris without cracking or shattering.
The 75 mm housing depth is slim enough to sit flush beneath most canopy soffit panels. The 266×266 mm footprint is compact compared to larger canopy luminaires, making the GS1 suitable for tighter mounting layouts and retrofits where existing drill patterns must be preserved.
Wide voltage and optional DALI control
The GS1 accepts 110–277VAC input, covering both North American (110–120V) and European (220–240V) supply standards without requiring a transformer. This wide-voltage design also tolerates voltage drop along long outdoor cable runs, common at fuel islands and large parking structures.
DALI-enabled variants support stepless dimming and scene control through a DALI bus. In canopy applications, DALI control allows lights to dim when natural daylight is sufficient, reducing energy consumption during midday hours. Multiple GS1 units can be addressed individually or grouped by zone for coordinated dimming across a full fuel island.
The Lumileds 3030 LED engine delivers consistent colour stability and lumen maintenance across all three wattage tiers. CRI above 82 ensures accurate colour rendering for vehicle paint, product packaging and signage under the canopy. The 120° beam angle provides wide, uniform coverage that minimises dark spots between adjacent fixtures.
