The ILED-TPR-C M5 is a 4-foot (1200 mm) LED vapour proof luminaire designed for industrial and commercial environments where moisture, dust, and impact resistance are critical. The IP66 rating protects against powerful water jets from any direction, and the IK10 impact rating (20 joules) means the diffuser and housing can withstand direct strikes from heavy objects such as falling tools or forklift masts.
Tech specs
The M5 is offered in three wattages: 20W (3000 lumens), 40W (6000 lumens), and 60W (9000 lumens), all at a rated 150 lumens per watt using LM80-certified LumiLEDs. This is the highest efficacy in the ILED-TPR-C series — the M11 rates 130 lm/W, and older M-series triproofs rate 120 lm/W. CRI exceeds 80, so colours in the space render naturally. The 3CCT switch lets you select 2800K warm white, 4000K neutral white, or 6500K cool white at installation. Input voltage is 220–240VAC at 50/60 Hz; this is not a universal-voltage model, so 110V regions need a transformer or a different SKU. The power factor is above 0.9. The fixture is Class II double-insulated, so no protective earth is required. The housing is 95 mm deep — deeper than the 74 mm M6 but shallower than the 105 mm M11 — giving more internal volume for the driver and optional emergency module.
Installation scale
The M5 includes an integrated installation scale printed on the housing or diffuser edge. This scale marks the exact cut-out dimensions needed for recessed mounting, eliminating the need to measure and mark the ceiling separately. Installers can place the fixture directly onto the ceiling surface, trace the cut-out line using the built-in scale, and cut with confidence on the first attempt. This feature is unique to the M5 within the ILED-TPR-C range and reduces installation time and material waste, particularly on large projects with multiple fixtures.
DALI2 and motion sensor
The M5 comes with a built-in DALI2 driver, enabling individual fixture addressing, scene setting, and integration with building management systems. DALI2 is the second-generation digital addressable lighting interface and is backwards-compatible with DALI-2 standardised profiles, so it works with most contemporary BMS platforms without custom programming. A standby motion sensor is included as standard — the light activates only when movement is detected, cutting energy in low-traffic zones such as storage aisles and stockrooms. The sensor can be adjusted for detection range and delay time on-site.
Emergency option
An emergency battery module is available as a factory-installed option. It provides approximately 90 minutes of backup illumination on mains failure, meeting exit-path lighting requirements in many jurisdictions. The deeper 95 mm housing accommodates the emergency module without increasing the overall depth, which is an advantage over slimmer housings where emergency options may not fit. Both DALI2 and emergency are factory-installed; neither can be added after manufacture.
Fabrication et installation
The housing is moulded polycarbonate in gray, with a frosted diffuser that produces a uniform 120° beam angle. Suspension is via eye-hooks or pendant mount. Cable entry uses sealed gland entries on either end, supporting daisy-chain wiring. The IP66 seal is maintained at each cable entry point. The installation scale simplifies recessed mounting: place the fixture on the ceiling, trace the cut-out, cut, and secure — no additional measuring tools needed.
Certifications and warranty
The ILED-TPR-C M5 carries CE, RoHS, SAA, and TUV certifications. SAA is required for Australian and New Zealand installations. TUV coverage extends validity to European and Middle Eastern markets. The standard warranty is 5 years, consistent with other M-series products in the ILED-TPR-C range.
