DC 12V 24V SMD 2835 60 LED pro meter Flexibilná LED pásiková svietidlo …

The ILED-FX-2835 60 is a flexible LED strip built around the SMD 2835 package at 60 LEDs per meter, offering white light in three temperatures. It sits in the middle of the 2835 range: brighter and denser than a low-count accent strip, but not as intense as the 120 piece version. That makes it the everyday workhorse for ambient and accent lighting where you want a clean, even white.

De LED Panel-Ëmmerung 1200 x 300 (ILED-PL12030-A) ass eng bëlleg, rechteckeg Kanten-Ëmmerung, déi fir linear Dache-Applicatiounen entwéckelt gouf, wou eng gläichméisseg, blendkontrolléiert Beliichtung néideg ass. Déi verlängert Form deckt méi Fläch pro Ëmmerung wéi quadratesch Paneller of, wat d'Gesamtzuel an d'Kabeléierung fir Korridor, Weeër an lang Raim verréngert. Déi 11mm déi bëlleg ass gutt an opgehange Dächer versteckt, ouni d'sicht Plang ze verréngern.

The strip runs on 12VDC or 24VDC, draws 8 to 12W per meter and puts out 800 to 1,200 lumen per meter with a 120 degree spread. Colour rendering is CRI above 80 as standard and above 90 on request. Each piece ships as a 5 meter roll, 8mm wide, cuttable in 25mm steps.

Why 60 LEDs per meter

Density decides how bright and how even the light is. At 60 LEDs per meter the strip gives a smooth, shadow-free line without the very high output of the 120 piece version, which suits coves, under-cabinet runs and ambient lighting better. It also draws less power than the denser strip, so it is easier to feed along a long line.

Dual voltage: 12V or 24V

You can have this strip on 12V or 24, and that is the main reason installers reach for it. A 12V version is simple and pairs with the small transformers used for short cove and cabinet runs. A 24V version drops less voltage down a long line, so it stays even when you are stringing it far, which is why 24 is the pick for long corridors and bigger rooms. Choose the voltage that fits your supply and the length of the run.

Choosing a white

This is a static white strip, so each piece is one temperature, not a mix. The three options are warm white for a soft, cosy look in living areas, commercial white for a balanced, general-purpose tone in work and shop spaces, and cool white for a brighter, cleaner light where visibility matters. Pick one before ordering; the strip cannot change temperature on the fly.

Alternativ för IP-klass

The same strip is offered in four protection ratings. IP20 is for dry indoor locations such as coves and cabinetry. IP65 handles covered outdoor and wet areas like eaves and facades. IP67 and IP68 are for where the strip gets fully wet or sits in harsh coastal air. Match the rating to the location, not the highest one on the list.

De ILED-PL12030-A laaft mat 40W an produzéiert 4000 Lumen aus engem 1195 x 295 x 11mm Panel, an liefert 100-110 Lumen pro Watt. D'Kanten-Ëmmerung PMMA Liichtgitt verdréit d'Liicht iwwer déi ganzt Fläch mat engem Stralwénkel vun 120°. Dréi fest Faarftemperaturë si beim Installatioun wielen: 2800K waarm-wäiss, 4000K neutral a 6500K küll-wäiss. D'Faarwweidergief ass iwwer 80. De Standard UGR ass 22; eng optional 19 nidderegt-Blendsvsioun ass fir Bëros an Computer-Nëtzungsumeldungen erhale. De Panel huet eng IP42-Bewäertung — geschützt géint feste Genétener méi grouss wéi 12,5mm an géint Tropfwasser vun uewen. Et ass net fir feucht oder nass Plazen bewäert.

The strip cuts cleanly in 25mm steps, so you trim it to fit instead of bending a longer piece. It is backed with 3M yellow double-sided tape, and a 3M red tape is available on request. A 15cm input cable is fitted to the leading end, and connector cables can be customized to a different length or plug. At 8mm wide it disappears into most coves and channels.

Kas ir kastē

Each order ships with the strip as a 5 meter roll, the 3M yellow mounting tape, and the 15cm input cable on the connection end. Custom lengths are cut to order from the same roll.

Kas jums jānodrošina

You will need a power supply at 12VDC or 24VDC, matched to the strip version, sized for your total meters. For dimming, a compatible LED dimmer is available. If you are not hard-wiring, use an adapter or driver that matches the strip voltage.

Kur to izmanto

As a mid-density white strip it shows up in cove and ceiling lighting, under-cabinet and under-bed zones, picture and window lighting, and general task lighting. Outdoors the IP65 and above versions handle eaves, facades and garden edges. The three white temperatures make it useful across homes, shops and offices.

Lebensdauer und Zuverlässigkeit

The SMD 2835 LEDs carry a 50,000 hour rated life, which at normal use is well past a decade. There are no moving parts and no fan, so the strip does not fail through heat. It works from -20 C to 50 C, and because it draws sensible power it stays cool even in tight, low-ventilation installs.

Here is what installers tell us they like about the 60 piece 2835 strip:

Dual voltage choice. You can order it on 12V or 24, so short runs stay simple and long runs stay even. That one feature saves you from guessing a supply later.

White only, no controller. It is a static strip, so there is no addressing to set up. You power it and it runs the one temperature you chose, which keeps the job clean.

Schneitt op déi exakt Längt. De Schneidschritt vun 25 mm bedeit, datt Dir d'Stref unpassend schmalt soss méi Meter verschwennet oder e Stéck krummt, dat net flach leie kann.

Wielt d'Schützklass. Vun IP20 bis IP68 sinn all op der selwechter Stref, sou datt Dir d'Klass fir de Plaz wielt, ierw Dir e anert Produkt ufroet.

Prett fir ufkleeblen. 3M gelb Tusch ass standard op der Réck, sou datt déi méist bannenzou Streef keng anner Befestegungsmethod brauchen.

Three white temperatures. Warm, commercial and cool white cover most ambient and task jobs without going to a different strip.

Mid-density white strips like this one are used in a lot of everyday settings:

Ufbauten an indirekt Belichtung. Running the strip in a cove line gives an even, shadow-free glow with no visible source. It is the classic pick for bedroom, lounge and office accent coves that need to stay consistent and soft along a whole wall.

Ënner-Schränken an Ënner-Betten. The output is enough to light a worktop, counter or reading zone, and the narrow 8mm body tucks away out of sight so the light is what you see, not the fixture itself.

TV, mirror and furniture backlight. A warm white strip behind a TV, mirror or cabinet edge adds depth and soft ambient light to a room without a direct light source.

Architektur und Fassade. With IP65 and above, the strip outlines eaves, columns, canopies and garden edges outdoors, weatherproof but still subtle.

Shop and office task lighting. Commercial white gives a neutral, general-purpose light for display areas, counters and work zones where clear visibility is wanted all day long.

Simple signage and marker lines. A fixed warm or cool white strip marks edges, steps or counters where a steady, unchanging light is exactly what the design calls for.

Einige Dinge, die vor der Bestellung zu prüfen sind:

Pick the voltage first. Choose 12V for short, easy runs and 24V for longer lines, and buy the matching power supply. Mixing them up is the most common cause of a strip that will not run.

Remember it is white only. The strip is static and comes in warm, commercial or cool white, one temperature per piece. If you need changing colours, that is the addressable RGB range, not this one.

Prilagodite stopnjo IP ocene lokaciji. IP20 je samo za suha notranja prostora. Za pokrite zunanje lokacije in mokre prostore uporabite IP65, za popolno ali hudo izpostavljanje pa IP67 ali IP68.

Načrtujte reze in spoje. Cut on the 25mm marks and keep a little length in reserve. For wet locations, seal every cut and joint with silicone after you wire it.

Napajajte dolge trase z obeh koncev. Even a 60 piece strip benefits from power at each end on a long line, so the middle does not dim.