Lampu Luar Ruangan Mudah Alih Untuk Parti IP65 216W Tanpa Wayar DMX512

The ILED-FEL-X3 is the outdoor member of the FEL-X battery family: the same portable, cable-free operation as its indoor siblings, with the output raised to 216W and the body rated IP65 so the weather is no longer the thing that ends the evening. It is built for the garden party, the courtyard wedding and the festival stage where the fixtures stand in the grass and the rain is a possibility rather than a rumour.

Output for outdoor distances

Outdoor rooms are bigger than indoor ones. The X3 runs 216W from a 6-in-1 RGBWAUV engine, which puts it a class above the indoor battery fixtures and gives the 15° or 40° lens enough output to reach up a two-storey facade or across a garden wall. The 15° head throws the defined column up a tree, a column or the corner of the house; the 40° head washes the hedge, the tent wall or the poolside broad and even. The angle is fixed per fixture, so the choice is made at order time against the surfaces the venue has.

RGBWAUV colour

The six channels, red, green, blue, white, amber and UV, give 16.7 million colour combinations from the DMX or the app. The white channel runs the clean architectural wash for the dinner; the amber warms the stone and the foliage past what red and green can mix; the UV runs the fluorescent looks for the late part of the night. Colour matches across the whole rig from the control system, so the fixtures around the garden hold one shade at the same time.

The battery and the weather

The built-in 13200mAh lithium battery is the largest in the family, sized for the outdoor job where the mains is a generator with a queue behind it. Runtime depends on how hard the fixture is driven, so a dim garden wash runs the evening and a full-output colour show plans around a recharge from the AC100-250V input. The IP65 rating is what separates this fixture from the indoor members of the family: dust-tight and protected against water jets, so the rain that would end an IP42 fixture’s night leaves this one running.

Control without cables

The control suite matches the rest of the family: wired DMX512 for the shows with a desk, 2.4G wireless DMX512 where the cable run across the garden is the problem, master-slave linking so one fixture drives the rest, self-propelled built-in programs, an infrared remote for quick changes, and a WiFi phone app for Apple and Android. Channel modes are 6, 8 or 10.

Body and installation

The body is aluminum with the shell as the heat sink, so the fixture runs silent. Three mounting modes, standing upright, surface-mounted flat or hanging, cover the grass, the wall and the truss. Charging runs from any AC100-250V supply at 50/60Hz, so the kit travels internationally without a transformer, and where the venue offers mains the fixture runs plugged in and charges at the same time.

Di mana ia digunakan

Garden and courtyard parties, where the fixtures stand in the flowerbeds and the hedges take the colour. Outdoor weddings, where the trees, the facade and the tent poles carry the wash and the weather is part of the plan. Festival and stage backdrops, where 2.4G wireless DMX runs the rig without a loom across the field. And architectural washes, where a building front takes its colour for the night from a row of battery fixtures on the ground.

What to check at order time

Three decisions shape the order: the lens angle against the surfaces the venue has, the number of fixtures against the perimeter the colour has to cover, and the DMX channel mode against the control system the show runs. The fixtures arrive with the battery built in and the three mounting modes covered, so the same unit stands in a flowerbed on Saturday and clamps to a truss next weekend without changing hardware.

Why do buyers pick the ILED-FEL-X3 over the alternatives? Here is what we hear from customers:

IP65, so the rain is not the end of the night. Most battery uplights are IP42 indoor fixtures. The X3 is dust-tight and water-jet protected, which is the difference between a garden event that survives the weather and one that does not.

216W reaches outdoor distances. A two-storey facade, a mature tree or a festival backdrop needs more than an indoor fixture gives. The 216W engine gives the 15° and 40° lenses the throw the outdoor room asks for.

The biggest battery in the family. 13200mAh built in, sized for the outdoor job where the mains is a generator with a queue behind it. No cable run across the lawn, no trip hazard, no power drop to order.

Every control path on the fixture. Wired DMX, 2.4G wireless DMX, master-slave, self-programs, IR remote and the phone app: the rig works with the festival desk or with a phone.

Travel and weather in one body. Aluminum shell, silent, standing or bracket mounts, and an AC100-250V charger that works on any supply. The kit goes in the van on Monday and on a plane next month.

The ILED-FEL-X3 is the outdoor battery wash for the events that happen where the weather and the mains are both uncertain.

Garden and courtyard parties. The fixtures stand in the flowerbeds and throw colour up the hedges, the trees and the house wall, on battery, with no cable across the lawn and no generator idling by the gate.

Outdoor weddings. The facade, the trees and the tent poles take the wash, the amber and white channels run the dinner, and the UV runs the late set. The IP65 rating is what lets the planner promise the evening before seeing the forecast.

Festival and stage backdrops. 2.4G wireless DMX runs the rig across the field without a cable loom, the 216W engines hold their colour at distance, and master-slave keeps the row matched off one fixture.

Architectural and facade washes. A building front, a bridge or a monument takes its colour for the night from a row of battery fixtures on the ground, repositioned per event without a permanent installation.

Poolside and waterfront venues. The water view is the reason the venue books, and the IP65 body handles the spray and the humidity that end an indoor fixture’s night, standing where the view needs the light.