Kit Pencahayaan Pentas Portabel untuk Gereja dan Band

The ILED-FEL-X2 is a battery-powered stage wash built for the venues that have no stage lighting and cannot install any: church halls that double as event spaces, bands playing the third bar of the night, schools and community rooms where the “rig” is whatever fits in a van. One fixture, an internal battery, and a colour engine that covers the whole show without a cable on the floor.

The battery changes the venue

The internal 9600mAh 18650 lithium pack is what makes the fixture portable in the practical sense. A church hall has no DMX outlets and no truss; a band’s stage is whatever the bar has left of its floor. The X2 stands upright on the floor at the front of the stage, mounts flat against a wall or pillar, or hangs from whatever the venue has, and it runs on the battery rather than the wall socket. Runtime depends on how hard the fixture is driven, so plan the set length on the show brightness rather than a single figure, and keep the AC100-250V charging input between shows. Because the input is 100-250V at 50/60Hz, the same fixture charges on any tour supply without a transformer.

RGBWAUV: six channels of colour

The light source is a 6-in-1 RGBWAUV LED array: red, green, blue, white, amber and UV in one engine, giving 16.7 million colour combinations from the DMX or the app. The white channel gives a clean key light for the band or the speaker. The amber channel warms the room past what red plus green can mix. The UV channel runs the fluorescent-effect looks that a youth night or a themed event asks for, which is the channel most 5-in-1 fixtures leave out. Beam angle is 15° for a defined front light or 40° for a broader wash, chosen at order time.

Control without a desk

Most churches and small bands do not run a lighting console, and the X2 is built for that. The fixture carries wired DMX512 for the venues that have a desk, 2.4G wireless DMX512 for a show rig without the cable run, master-slave linking so one fixture drives the others, self-propelled built-in programs, an infrared remote for quick changes, and a WiFi phone app for Apple and Android. Channel modes are 6, 8 or 10, so the fixture behaves as a simple colour wash or splits its channels for fuller control.

Pembinaan dan pemasangan

The body is aluminum with the shell doubling as the heat sink, so there are no fans and no noise on a quiet acoustic set. Output is 108W, the fixture is rated IP42 for dry indoor stages, and the three mounting modes, standing, surface-mounted or hanging, cover the positions a portable rig meets. Charging runs from any AC100-250V supply at 50/60Hz, so the fixture travels and charges internationally without a transformer.

Di mana ia digunakan

Church halls, where the Sunday service needs a clean white wash and the youth night needs colour and UV from the same fixture, with no permanent installation. Band stages, where two or three fixtures on stands at the front of the stage are the whole rig and the battery skips the power drop. Schools and community events, where the fixture lives in a cupboard between shows. And weddings and parties, where the portable kit travels in a car and runs the room on battery and a phone.

What is in the kit

The kit is built around the ILED-FEL-X2 fixture, with the charging supply and the mounting options covering the three installation modes: standing, surface-mounted or hanging. Confirm the exact kit contents and the number of fixtures with the order, because portable kits are configured to the show. The fixture itself needs no separate controller, no ballast and no tools to put on stage: stand it, power or charge it, and set the colour from the panel, the remote or the app.

Why do buyers pick the ILED-FEL-X2 over the alternatives? Here is what we hear from customers:

It lights the room without rewiring it. Most churches and small venues have no stage power where the light needs to go. The internal 9600mAh battery puts the fixture at the front of the stage with no cable run and no electrician.

The UV channel is included. Most portable fixtures stop at RGBWA. The X2 adds UV, which is the channel a youth night or a themed event actually asks for, and it is on the same engine as the Sunday white wash.

Every control path a small show needs. Wired DMX for venues with a desk, 2.4G wireless DMX where the cable run is the problem, master-slave for a matched pair, and the phone app or IR remote when there is no operator.

Built to travel weekly. Aluminum shell, no fans, standing or hanging mounts, and an AC100-250V charger that works on any tour supply, built for the van-and-cupboard life of a portable rig.

Tenang di pentas. The aluminum body is the heat sink, so there are no fans. On an acoustic set or a sermon recording, the fixture is silent.

The ILED-FEL-X2 is the stage light for venues that cannot install lighting: it travels in a car, stands where the stage is, and runs on battery, app or desk depending on the night.

Church halls. A clean white wash for the Sunday service from the white channel, colour and UV for the youth night from the same fixture, standing at the front of the stage or mounted flat on the pillar, with no permanent installation and no cable across the aisle.

Band stages. Two or three fixtures on stands at the front of the stage are the whole rig: the 15° heads as front light, the 40° heads as the wash, all running master-slave off one fixture or the desk if the venue has one.

Schools and community events. The kit lives in a cupboard between shows, charges from any AC100-250V socket, and comes out for the school production, the assembly and the fundraiser without a booking an electrician.

Weddings and private parties. The battery and the phone app are the whole operation: stand the fixtures where the room needs colour, set the scene from a phone, and take them home at the end of the night.

Small touring productions. The aluminum body and the AC100-250V charger travel internationally without a transformer, and 2.4G wireless DMX links the rig back to the desk without a cable run across the venue.