Panel LED Fleksibel SMD 2835 DC 12V 24V …

What Is the ILED-FX-2835 SMD 2835 LED Strip?

The ILED-FX-2835 is a flexible white SMD 2835 LED strip offered in two density variants — 60 and 120 LEDs per metre — in three colour temperatures: Warm White (2700K–3000K), Commercial White (4000K), and Cool White (5500K–6500K). Each variant uses the standard 2835 SMD package — a dual-chip LED in a 2.8 mm × 3.5 mm housing — mounted on an 8 mm flexible printed circuit. The strip is controlled by a standard single-channel PWM dimmer and produces uniform white light along its entire length.

Available Variants

Colour Temperature Options

The FX-2835 is available in three white colour temperatures. Warm White (2700K–3000K) provides a soft, inviting tone suitable for residential living spaces and hospitality. Commercial White (4000K) is the neutral standard for offices, retail, and task lighting. Cool White (5500K–6500K) delivers a bright, crisp tone for industrial and high-contrast applications. All three share the same 2835 SMD package and beam angle — the difference is purely in the phosphor formulation.

IP Rating Options

The FX-2835 is offered in four IP variants: IP20 for dry indoor use, IP65 for splash-proof outdoor coverage, IP67 for temporary submersion, and IP68 for continuous underwater use. Select the rating that matches your installation environment at order time — the silicone coating and connector type differ between variants and cannot be changed after manufacture. Do not mix IP ratings on the same run.

Key Specifications

Aplikasi

The ILED-FX-2835 is suited to general-purpose white lighting where uniform, cost-effective illumination is the priority. The 60 LEDs/m model delivers balanced brightness for residential and light-commercial use. The 120 LEDs/m model provides high output for commercial signage, retail display, and high-bay accent applications. The 120° beam angle ensures wide, even coverage across illuminated surfaces.

The ILED-FX-2835 occupies a key position in the ILED strip-light range: it delivers significantly higher brightness than the FX-3528 (approximately double the lumens per metre at comparable density) while remaining far more cost-effective than COB solutions such as the COB-512 (13475). The two-density format — 60 LEDs/m for moderate output, 120 LEDs/m for high output — covers the vast majority of white-light strip applications without requiring a third product.

Three colour temperatures (Warm White, Commercial White, Cool White) and a CRI >90 option allow you to match the strip to the application without compromise. Four IP ratings (IP20, IP65, IP67, IP68) extend use from dry indoor coves to sheltered outdoor installations. The 8 mm PCB width keeps the profile slim, and the 25 mm cut length allows precise on-site adjustment.

Both the 60 and 120 LED models accept 12VDC or 24VDC input, giving flexibility in power-supply selection. The 50,000-hour rated lifetime and 3M adhesive backing make the FX-2835 a practical, low-maintenance solution for permanent installations.

What is the difference between the 60 and 120 LED models?
The two models differ in LED density, power draw, and brightness. The 60 LEDs/m model draws 8–12 W/m and delivers 800–1200 lm/m, making it suitable for moderate-brightness applications such as residential under-cabinet and cove lighting. The 120 LEDs/m model draws 16–24 W/m and delivers 1600–2400 lm/m, designed for high-brightness commercial and retail applications. Both share the same 2835 SMD package, 120° beam angle, 8 mm width, and IP options.

Which input voltage should I use — 12VDC or 24VDC?
Both the 60 and 120 LEDs/m models support both 12VDC and 24VDC. For runs over 3 metres, 24VDC is recommended because it reduces voltage drop and maintains brightness consistency at the far end. For short runs or where 12VDC power supplies are already installed, either voltage works correctly.

Is CRI >90 available?
Yes, CRI >90 is available as an option for all three colour temperatures (Warm White, Commercial White, Cool White). Standard CRI is >80 across all variants. Specify the CRI >90 option at order time — it is not available as a post-purchase upgrade.

Which IP rating should I choose?
IP20 for dry indoor installations (ceiling coves, under-shelf, TV backlighting). IP65 for covered outdoor use (soffits, sheltered facades). IP67 for outdoor areas exposed to rain. IP68 for water features or submersion. Do not mix IP ratings on the same run — each variant has a different silicone coating.

How does the FX-2835 differ from the FX-3528?
The FX-2835 (14049) uses a larger 2835 SMD package and draws roughly double the power per metre compared to the FX-3528 (14051) at similar density. The FX-2835 60 LEDs/m produces approximately 800–1200 lm/m, while the FX-3528 120 LEDs/m produces around 800 lm/m — the 2835 delivers higher brightness at the same LED count. Both share the same 8 mm PCB width, 120° beam angle, 25 mm cut length, and IP options. Choose the FX-2835 when higher brightness per metre is needed; choose the FX-3528 when lower power consumption is preferred.

Residential and commercial task lighting.
— The FX-2835 produces bright, uniform white light suitable for kitchen under-cabinets, desk lamps, wardrobe lighting, and bathroom vanity strips. The 60 LEDs/m model is economical for low-power residential use; the 120 LEDs/m model delivers higher output where more lumens are required. CRI >90 is recommended for colour-critical tasks such as food preparation and makeup application.

Cove and architectural accent lighting.
— The 120° beam angle and even LED spacing produce uniform illumination in ceiling coves, cornices, and recessed channels without visible hot spots. The 24VDC-compatible models maintain brightness consistency on longer runs up to 5 metres. The 8 mm PCB width keeps the profile slim and unobtrusive in tight channels.

Commercial signage and display backlighting.
— The 120 LEDs/m model delivers high brightness (1600–2400 lm/m) suitable for light boxes, advertising signs, and retail display backlighting. Available in three colour temperatures to match brand identity. The IP65 variant extends use to covered outdoor signage.

Outdoor and landscape accent lighting.
— The IP65, IP67, and IP68 variants extend use to covered outdoor installations including soffit uplighting, garden path marking, and façade accent lighting. The silicone-coated variants resist moisture and UV exposure for long-term outdoor performance. Ensure adequate ventilation to keep junction temperatures within the -20°C to 50°C operating range.

CRI >90 is optional for all white variants. — Standard CRI is >80 across Warm White, Commercial White, and Cool White models. CRI >90 is available as an upgrade for any colour temperature — specify at order time. It is not available as a post-purchase upgrade.

Cuts at 25 mm intervals. — The FX-2835 cuts at 25 mm marked points on the PCB. Always cut at the marks — cutting between them breaks the circuit. The FX-3528 (14051) and FX-5050 RGB (14054) also cut at 25 mm; the COB-512 (13475) cuts at 62.5 mm.

Standard roll length is 5 metres. — Custom lengths are available on request. The 3M adhesive backing is standard in yellow; red backing is available as an option. The 15 cm input cable is standard — custom cable lengths can be specified at order time.

Static white — not addressable. — The FX-2835 produces a single uniform white colour along its entire length. It cannot display different colours on different sections simultaneously. For multi-zone colour effects, select an addressable RGB strip (WS2812B or DMX-controlled). The static design is simpler, more cost-effective, and more reliable for uniform white-light applications.