V Corner Wall Light LED IP65 3CCT Triangular

The ILED-BH-RT V Corner Wall Light is a triangular IP65-rated fixture built for 90-degree wall corners. Three models—ILED-BH-RT250 (18W), ILED-BH-RT375 (24W), and ILED-BH-RT500 (30W)—share the same PC body and diffuser in white finish. Input voltage covers 220-240VAC or 110-277VAC. The 3CCT driver lets you select 3000K warm, 4000K neutral, or 6000K cool white at install. The triangular profile hugs corner angles flush against the wall.

Tech specs at a glance

Three models share the same IP65 housing—only size and output differ.

The ILED-BH-RT250 runs 18W, delivers 2000 lumens, and measures 265×125×100mm. The ILED-BH-RT375 pushes 24W and 2600 lumens from a 320×150×100mm frame. The ILED-BH-RT500 tops out at 30W and 3300 lumens from a 500×150×110mm housing. All three achieve 110LM/W luminous efficacy, maintain CRI >80, and draw power factor above 0.9. LM80-certified LEDs are used across the series.

Beam angle is not specified in the product data sheet. As a corner-mounted wall light with a PC diffuser, light spreads downward and outward in a wide pattern suitable for ambient corridor and corner illumination.

Build and mounting

The housing is PC (polycarbonate) body with a matching PC diffuser in white finish. The triangular shape is designed to sit flush in a 90-degree wall corner—no gap between the fixture edge and the wall plane. Surface mounting uses screws through the back plate; no recessed cutout is required.

The IP65 rating means the enclosure is dust-tight and protected against water jets from any direction. This makes the fixture suitable for bathrooms, covered patios, and other damp locations where moisture or steam is present. The PC materials resist yellowing and degradation in humid conditions.

3CCT color selection

The 3CCT (Tri Color Changeable) driver has a physical switch on the unit. Before powering the fixture for the first time, set the switch to your preferred color temperature—3000K warm white, 4000K neutral white, or 6000K cool white. Once set, the color stays fixed until you change the switch again. All three modes maintain CRI >80 so colors appear natural. This is useful when a space serves two purposes—warm light for a bedroom corner, cool light for a bathroom vanity area.

What is in the box

Each unit ships as a complete fixture including the sealed driver, PC diffuser, and mounting hardware. No separate transformer is needed for basic operation. The fixture contains no mercury and emits no UV or IR radiation.

What you need to supply

Standard wall-mounting screws and anchors for your wall material (drywall, tile, or concrete). A voltage tester. For damp-location hardwiring, a licensed electrician to follow local electrical codes.

Optional features

DALI dimming, 0-10V dimming, and emergency backup kits are available as factory options. They are selected at order time and cannot be added later. DALI and 0-10V connect to building automation for scheduled or sensor-triggered control. Emergency backup provides battery-backed illumination during power failures—professional wiring is recommended for the emergency circuit, and backup duration depends on the specific kit.

Certifications and warranty

SAA, CE, and RoHS certifications confirm compliance with safety and environmental standards. The product is manufactured under quality controls. Warranty is 3-5 years depending on the configuration—verify the exact term with your supplier at the time of order.

Maintenance

Wipe the PC diffuser with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners, which can cloud the material. The sealed driver does not require user servicing. Replace the entire fixture if the driver fails rather than attempting field repair.

Where it gets used

Bathroom vanity corners where the triangular profile fits around mirrors without taking up wall space. Covered patios and entryways exposed to rain and humidity where IP65 protection is needed. Hotel corridors and common areas where corner-mounted fixtures save space and reduce visual clutter. Commercial garages and workshops where vibration resistance matters. Laundromats and pool rooms where constant moisture challenges standard wall lights.

Buyers choose the ILED-BH-RT V Corner Wall Light series for these reasons:

Triangular V-corner design. The fixture sits flush in 90-degree wall corners with no gap. Surface-mounted with screws—no recessed cutout needed. Ideal for tight spaces where standard round or square fixtures leave unsightly gaps.

IP65 waterproof protection. The PC body and diffuser resist corrosion and yellowing in humid environments. Suitable for bathrooms, covered patios, and industrial washdown areas. Backed by a 3-5 year warranty.

3CCT selectable color temperature. One fixture, three color temperatures—3000K warm, 4000K neutral, 6000K cool—set with a simple switch. No need to purchase separate fixtures for different lighting needs.

110LM/W with CRI >80. High lumen output per watt and accurate color rendering across all three color temperature modes. LM80-certified LEDs. No UV or IR emissions. SAA/CE/ROHS certified. PF >0.9.

Factory-configured options. DALI dimming, 0-10V dimming, and emergency backup are available at order. They cannot be retrofitted after purchase, so specify all requirements upfront.

Consistent build across all models. Every variant in the ILED-BH-RT series uses the same PC housing, IP65 rating, and LM80-certified LEDs—only the size and lumen output change between the 18W, 24W, and 30W options.

Bathroom Vanity Corners: The compact 18W model fits around mirrors without taking up wall space. Switch from 3000K warm for a relaxing atmosphere to 6000K cool for grooming tasks. The triangular profile sits flush in 90-degree corners where standard round fixtures leave gaps.

Covered Patios and Entryways: Mount in V-corners on exterior walls under eaves. The 30W model delivers 3300LM for larger outdoor entertaining areas. The IP65 rating handles rain and humidity. Multiple fixtures can be wired from a single junction box.

Kitchen and Utility Room Corners: CRI >80 renders food and surface colors accurately under task lighting. The 24W model provides bright, even light over counters and work surfaces. Optional dimming lets you adjust brightness for cooking versus cleaning.

Commercial Garages and Workshops: The shock-resistant PC housing endures vibration from tools and vehicles. Wide voltage support (110-277VAC) handles voltage fluctuations common in workshop environments. Emergency backup ensures safe exit lighting during power failures.

Hotel Corridors and Common Areas: DALI integration enables zone-based lighting control. The slim triangular profile blends into walls without protruding. Motion sensor options reduce energy waste in low-traffic sections.

Laundromats and Pool Rooms: High humidity and constant moisture challenge standard wall fixtures. The IP65 rating and PC construction handle the environment without corrosion or yellowing over time.

Before ordering, check the following:

Model and size selection. Choose ILED-BH-RT250 (18W, 265×125×100mm) for small bathrooms, ILED-BH-RT375 (24W, 320×150×100mm) for medium corners, and ILED-BH-RT500 (30W, 500×150×110mm) for large entryways or long corridor runs. Each model has a different housing size—confirm the corner dimensions before ordering.

Mounting type. This is a surface-mounted fixture. It attaches to the wall with screws through the back plate—no recessed cutout is needed. Ensure the wall material can support the fixture weight.

Input voltage. This fixture accepts 220-240VAC or 110-277VAC. Confirm your site voltage before ordering to ensure compatibility with your local supply.

Optional features. DALI dimming, 0-10V dimming, and emergency backup are factory-selected. They cannot be added after purchase. Specify all options at order time.

Installation tip. Set the 3CCT switch before powering on for the first time. It is easier at a workbench than on a ladder.

Warranty. Keep your purchase receipt. The warranty period (3-5 years) begins from the date of purchase. Some regions may require product registration within 30 days.