5 Kanallı DMX 512 RGBWW DIN Ray Decodera

The FEL-CD264 is the 5-channel DMX decoder for the DIN rail: RGBWW output — red, green, blue, warm white and white on five separate channels at 5 amps each — with 4096 grey levels per channel and the DMX512/1990 line landing on the terminal block. It is the decoder for the large-scale panels that wire the DMX on the terminals rather than the RJ45, and the electrical set is identical to the RJ45 sibling in the range.

The five channels

The output is RGBWW — the RGB channels carry the colour mix, and the warm-white and white channels carry the tunable white independently, which is the set the dual-white strips and the colour-plus-white fittings run. The output is constant-voltage PWM at 5 amps per channel, so the strip and the fittings on the far side run at the voltage the supply delivers.

Kanal başına 4096 gri seviye

Her kanal 4096 seviyede çözümlenir; bu, yumuşak kararmaya gereken çözünürlüktür: solmalar, 8 bitlik çözücülerin düşük aralıkta gösterdiği basamaklanma olmadan çalışır ve yavaş sahne değişiklikleri kamerada temiz okunur. Highlights bunu yumuşak, hafif karartma olarak adlandırır ve 4096 seviyeli çözümleme bunun arkasındaki sayıdır.

Terminal block, master or slave

The DMX512/1990 line lands on the terminal block, and the controller runs as master or slave on the line: master for the standalone setups, slave for the desks and the main controllers. The terminal block is the simpler wiring for the panels without the structured cabling — the installer lands the wires directly, and the daisy-chain continues from the block.

Çalışma sınırları

The supply is DC12-24V, and the output power runs 300W at 12V or 600W at 24V — the higher voltage doubles the run the same copper carries. The working temperature is -20°C to +55°C, the dimension is 111×46×66mm and the weight is 135g, so the decoder is the panel-mounted unit the DIN rail carries without a shelf or a bracket.

Nerede kullanılır

The large-scale architectural installs, where the decoders line up in the distribution boards and the terminal blocks land the DMX per zone. Hotels and façades, where the RGBWW strips run the colour and the tunable white from one decoder per zone. Stage and studio rigs, where the CV strips need the DMX decode on the rail. And the retail and display installations, where the 4096-level decode is what the slow, camera-visible fades need.

Panel planlaması

Three decisions shape the order: the decoder count against the strip load per zone, the supply against the 300W-at-12V or 600W-at-24V arithmetic, and the DMX addressing against the zones the desk or the master runs. Count the strip metres per zone, size the supply with the headroom, and number the decoders on the rail — the terminal block carries the line in the order the panel is wired. With those three set, the install is a panel-building exercise rather than a ceiling-void project, and the next contractor reads the layout off the rail.

Seride çözücü seçimi

The DMX decoder family splits by mount and connection: the CD264 is the terminal-block decoder on the DIN rail for the panels that wire the DMX directly; the CD268 is the same 5-channel RGBWW electrical set with the RJ45 socket for the structured-cabling installs; the CD269 series runs 24 and 32 channels for the multi-zone panels; and the CD206-4 is the standalone RGBW decoder with the XLR-3, RJ45 and terminal connections for the rigs. The choice is the mount and the connection the install runs — the 4096-level decode, the 5-amp channels and the master-or-slave logic are the same across the range.

Why do buyers pick the FEL-CD264 over the alternatives? Here is what we hear from customers:

Büyük ölçekli kurulumlar için DIN rayı. Decoder'lar, tavan boşluğunda dağılmak yerine dağıtım panosuna sıralanır — elektrikçinin kablo çektiği pano, AV ekibinin patch'i yaptığı panodur ve her iki taraf da kanalları bıraktıkları yerde bulur.

Yapılandırılmış kablo tesisatı olmayan paneller için terminal bloğu. DMX, doğrudan bloğa iner — RJ45 kullanmayan kurulumlar için daha basit kablo tesisatı, daisy-chain aynı bloktan devam eder.

RGBWW: the colour and the tunable white on one decoder. Five channels at 5 amps each carry the colour mix and the tunable white together, which is the set the dual-white strips and the colour-plus-white fittings run.

Kanal başına 4096 gri seviyesi. Geçişler, 8-bit decoder'lerin düşük uçta gösterdiği adımlama olmadan çalışır — yavaş sahne değişiklikleri kamerada temiz görünür ve düşük uçta söndürme ucuz decoder'lerin başarısız olduğu yerdir.

Efendi veya köle. The controller runs standalone as master or joins the desk as slave — the small installs and the big rigs run the same hardware.

The FEL-CD264 is the decoder for the large-scale RGBWW installs that wire the DMX on the terminals: the DIN-rail fitting that sits in the distribution board and drives the colour and the tunable white from the DMX line.

Mimari ve cephe aydınlatması. The decoders line the distribution boards, the terminal blocks land the DMX per zone, and the RGBWW strips run the colour and the tunable white from one decoder per zone.

Otellar ve konaklama. The dual-white fittings dim and shift on the 4096-level decode, the scene changes read clean on camera, and the DIN rail keeps the decoders in the panel the staff can reach.

Sahne ve stüdyo kurulumları. The CV strips decode as slave to the desk, the 5-channel RGBWW covers the colour and the white separately, and the master mode runs the small rigs without a console.

Perakende ve sergileme kurulumları. 4096 seviyeli kodlama, sergi aydınlatmasının kullandığı yavaş, kamerada görünür geçişleri çalıştırır ve kodlayıcılar raya ait katlar arasında ölçeklenir.

Dağıtım pano kurulumları. Kodlayıcılar, elektrikçinin kabloladığı panelde hizalanır; terminal bloğu, yapısallı kablolamanın bittiği noktada hattı konumlandırır ve panel düzeni, sonraki yüklenicinin okuduğu belgelerdir.