50W Flood Light LED IP66 Meanwell Driver

The ILED-FL1 50W is a compact flat-panel LED flood light with DALI dimming, built for small-scale outdoor areas where targeted, uniform illumination is sufficient. Its rectangular housing — 239×284×53 mm — couples a 115° beam angle with approximately 6,500 lm output (130 lm/W) for even ground coverage from typical mounting heights. The die-cast aluminium body and tempered glass front carry an IP66 rating for sustained outdoor exposure, and universal 110–277VAC input supports compatibility across global markets, including North American and European regions.

Tech specs

• Model: ILED-FL1 50W
• Wattage: 50W
• Luminous efficacy: 130 lm/W
• Housing dimensions: 239×284×53 mm (compact flat panel)
• LED source: Lumileds LM80 LEDs
• Beam angle: 115°, wide downward distribution
• Color temperature: 2800K–6500K (3CCT selectable)
• CRI: >80 standard, >70 available on request
• Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
• Power factor: >0.9
• IP rating: IP66 — dust-tight, protected against powerful water jets
• Body & finish: Die-cast aluminium housing with tempered glass front, black powder-coat
• Control: DALI dimmable
• Mounting: Bracket-compatible for pole, arm, or wall suspension
• Certifications: CE, RoHS, SAA
• Warranty: 5 years

115° beam for targeted wide-area lighting

The FL1 50W’s 115° beam angle is designed for applications where moderate, even illumination is needed across smaller floor areas. At typical mounting heights of 3–8 m, the 115° spread covers a focused elliptical footprint with minimal hot-spotting, making it well suited to residential driveways, small sports courts, loading bays and pathway lighting where full-site flood illumination is unnecessary. The rectangular housing projects light symmetrically across its longer axis, which aligns well with narrow or elongated spaces.

Compared with higher-wattage FL1 models (100W and 150W), the 50W variant requires fewer fixtures to cover the same small area at lower mounting heights, reducing both material costs and visual clutter. This makes the FL1 50W a practical choice for projects where coverage area is limited and energy efficiency is a priority.

DALI dimming for energy-efficient operation

The FL1 50W includes DALI (Digital Addressable Lighting Interface) dimming as a standard feature, allowing light output to be adjusted in response to ambient daylight or occupancy conditions. In residential or small commercial applications, DALI enables scheduled dimming during off-peak hours — for example, reducing output to 50% after midnight while maintaining sufficient security illumination. This programmable control can cut energy consumption significantly compared to fixed-output flood lights, without requiring external photocells or manual switching.

The DALI interface also supports centralised monitoring and fault reporting through a lighting management system, which is valuable for facility managers overseeing multiple flood light installations across a site. Each FL1 50W unit can be addressed individually, allowing zone-based control rather than whole-site on/off switching.

IP66 sealing for harsh outdoor environments

The FL1 50W carries an IP66 rating, meaning it is completely protected against dust ingress and can withstand powerful water jets from any direction. This makes it suitable for coastal sites, uncovered residential areas and light-industrial yards where rain, wind-driven spray and airborne particulates are constant exposure factors. The tempered glass front panel resists impact from debris and maintenance equipment far better than standard polycarbonate diffusers, and the die-cast aluminium housing with black powder-coat finish provides corrosion resistance in salty or chemically exposed environments.

The compact 53 mm depth of the FL1 50W housing is the lowest in the FL1 series, allowing it to mount close to soffits, eaves or wall brackets without protruding visibly. This ultra-low-profile design is particularly useful for residential and architectural applications where the fixture silhouette matters during daytime.

Why do buyers pick the ILED-FL1 50W over other 50W flood lights? Here is what we hear from customers:

DALI dimming standard — energy savings without extra hardware. The FL1 50W includes DALI dimming built in, unlike many 50W flood lights that offer only on/off switching. For residential and small commercial sites running lights overnight, DALI enables scheduled dimming that cuts energy use during off-peak hours.

IP66 rating — suited to harsher environments than IP65 fixtures. The FL1 50W carries an IP66 seal rated to resist powerful water jets. For coastal sites and heavy rain locations, this extra sealing margin reduces maintenance compared to IP65 alternatives.

130 lm/W at 50W — high efficacy in an ultra-compact 53 mm panel. At 130 lm/W the FL1 50W produces approximately 6,500 lm from a housing only 53 mm deep — the most compact in the FL1 series — allowing targeted wash coverage from low mounting positions.

5-year warranty — longer than the industry standard. The FL1 50W comes with a 5-year warranty, longer than the 3-year standard on many competing 50W flood lights.

Residential driveways and pathways. — The FL1 50W’s 115° beam and ~6,500 lm output provide even wash lighting over driveways, walkways and garden borders from low mounting positions. DALI dimming allows reduced output after midnight while maintaining sufficient security illumination.

Small commercial and retail outdoor areas. — Shop fronts, small parking lots and commercial plaza perimeters use the FL1 50W for safe, well-lit access areas. CRI80 standard rendering ensures accurate colour appearance for security camera footage and customer-facing environments.

Light industrial and warehouse entries. — Loading bays, warehouse entrances and small factory yards use the FL1 50W for functional security and operational lighting. The IP66 seal protects against dust, oil mist and temperature swings common in light-industrial outdoor adjacencies.

Residential and commercial perimeter lighting. — Property boundaries, utility compounds and construction perimeters use the FL1 50W for continuous overnight illumination. The IP66 seal and tempered glass front resist weather exposure in unattended outdoor locations.

Architectural façade accent lighting. — Building entrances, bridge undersides and small-scale architectural features use the FL1 50W for functional illumination. The ultra-compact 53 mm profile sits close to mounting surfaces, minimising daytime visual intrusion.

DALI controller. — The FL1 50W requires a DALI controller or lighting management system to use dimming features. Confirm controller availability before ordering; the fixture does not include one.

CRI80 is standard. — CRI>80 comes standard on the FL1 50W. If CRI>70 is preferred for cost-sensitive projects, confirm the variant at order — it is not a field-changeable upgrade.

IP66 for wet locations. — The FL1 50W’s IP66 seal is rated for direct rain and powerful water jets. For fully enclosed indoor installations, IP65-rated fixtures may be sufficient and lower-cost.

Mounting height and beam spread. — The 115° beam is optimised for mounting between 3 m and 8 m. At greater heights the wash becomes diffuse; at lower heights edge intensity may be uneven. Confirm throw distance before ordering.

Tempered glass front. — The FL1 50W uses a tempered glass front panel for superior impact resistance. For high-traffic or debris-prone locations, the glass front is the recommended choice over polycarbonate alternatives.