LED Tri Proof Light 40W 20W 60W 80W Lamp Fixture IP66 IK10

The ILED-TPR-A is a basic LED triproof fitting in the ILED-TPR-B family. It is distinguished by its 90 × 74 mm aluminum-and-PC housing, IP66 sealing, IK10 impact rating, and four wattage options up to 80W — the highest in the basic triproof range. The A-series does not include DALI2, emergency backup, or a motion sensor; those features are reserved for the ILED-TPR-C M-series.

Tech specs

• LED luminous efficacy: 120 lm/W — 3600 lm (600mm/30W), 4800 lm (900mm/40W), 7200 lm (1200mm/60W), 9600 lm (1500mm/80W)
• Beam angle: 120° wide optical distribution
• Correlated colour temperature: 2800K–6500K (includes warm white and daylight)
• CRI: >82
• Power factor: >0.9
• IP rating: IP66 — fully dust-tight, protected against powerful water jets and temporary submersion
• IK rating: IK10 — rated for 20 joules of impact, the highest level for this product type
• Body & diffuser: Aluminum body + PC diffuser, white or silver finish
• Dimensions: 90 × 74 mm cross-section
• Input voltage: 220–240VAC / 110–277VAC wide voltage (global compatibility)
• Certifications: CE, RoHS, SAA, TUV
• Warranty: 5 years

Aluminum body and thermal design

The A-series uses an aluminum body that acts as a passive heat sink, drawing heat away from the LED array without fans or moving parts. This design supports the 120 lm/W output across all four wattage levels — including the 80W / 1500 mm variant — without thermal throttling. The aluminum housing is powder-coated in white or silver to resist corrosion in damp environments.

The PC diffuser is secured to the aluminum body with a sealed gasket, maintaining the IP66 rating at the junction between the optics and the driver compartment.

Installation and maintenance

The A-series is supplied as a complete unit with integral driver. Surface mounting uses the built-in fixing brackets — two points per fixture, suitable for concrete, timber, and metal ceiling structures. The PC diffuser is pre-fitted and does not require separate handling during installation.

Maintenance is minimal. The sealed aluminum-PC housing keeps dust and moisture out of the LED compartment. In standard conditions the LED source retains above 80% of initial lumens for the life of the 5-year warranty period. If the diffuser surface accumulates dust or debris, a damp cloth wipe is sufficient — no access to the driver is needed.

Typical applications

The ILED-TPR-A is suited to demanding indoor and outdoor environments where IP66 sealing, IK10 impact resistance, and high output from a single-tube form factor are all required. It does not include DALI2 control, emergency backup, or a motion sensor — those features belong to the ILED-TPR-C M-series. Below are the applications customers specify the A-series for most often.

Warehouses and distribution centres. — High bays and long aisles benefit from the 80W / 9600 lm output of the 1500 mm variant, which covers a wide floor area from a single ceiling-mounted unit. The IK10 rating protects against forklift bumps and falling objects common in these environments.

Manufacturing workshops and assembly lines. — The aluminum body provides durable heat dissipation for continuous operation, while the 120 lm/W output keeps running costs low. Choose the 60W / 1200 mm variant for general workshop illumination; upgrade to 80W where task lighting density is higher.

Outdoor car parks, loading bays, and building exteriors. — IP66 sealing handles rain driven sideways by wind, and IK10 impact resistance survives the occasional struck pallet or dropped tool. The wide voltage range (110–277VAC) means the same SKU works in both 110V and 230V regions without reordering.

Agricultural and food-processing buildings. — The IP66 seal tolerates frequent high-pressure wash-down, and the sealed aluminum-PC housing resists the corrosive effects of cleaning chemicals and ambient humidity common in dairy, poultry, and meat-processing environments.

Retail stockrooms and back-of-house areas. — Basic on/off operation is all that is required in these spaces. The A-series delivers high output at a competitive price point without the added cost of DALI2 or emergency driver variants that the M-series offers.

Why do buyers pick the ILED-TPR-A over other basic triproof fittings? Here is what we hear from customers:

80W / 9600 lm — the highest output in the basic triproof range. No other basic (non-M-series) triproof offers an 80W option. The 1500 mm A-series variant delivers 9600 lumens from a single tube, reducing the fixture count needed to light large warehouses and high-bay spaces.

IP66 + IK10 — fully exposed outdoor rated. Most basic triproofs carry only an IP65 rating and no IK impact rating. The A-series is rated IP66 (protected against powerful water jets and temporary submersion) and IK10 (20 joules of impact), making it suitable for fully exposed outdoor mounting on building facades and car park canopies.

Wide voltage 110–277VAC — one SKU for global projects. The A-series accepts both 110V and 230V input without a driver swap. For multinational projects, this eliminates the need to spec different SKUs for different regions, simplifying procurement and reducing stock complexity.

Warehouses and distribution centres. — High bays and long aisles benefit from the 80W / 9600 lm output of the 1500 mm variant, which covers a wide floor area from a single ceiling-mounted unit. The IK10 rating protects against forklift bumps and falling objects common in these environments.

Manufacturing workshops and assembly lines. — The aluminum body provides durable heat dissipation for continuous operation, while the 120 lm/W output keeps running costs low. Choose the 60W / 1200 mm variant for general workshop illumination; upgrade to 80W where task lighting density is higher.

Outdoor car parks, loading bays, and building exteriors. — IP66 sealing handles rain driven sideways by wind, and IK10 impact resistance survives the occasional struck pallet or dropped tool. The wide voltage range (110–277VAC) means the same SKU works in both 110V and 230V regions without reordering.

Agricultural and food-processing buildings. — The IP66 seal tolerates frequent high-pressure wash-down, and the sealed aluminum-PC housing resists the corrosive effects of cleaning chemicals and ambient humidity common in dairy, poultry, and meat-processing environments.

Retail stockrooms and back-of-house areas. — Basic on/off operation is all that is required in these spaces. The A-series delivers high output at a competitive price point without the added cost of DALI2 or emergency driver variants that the M-series offers.

Stock management. — The A-series covers 600 mm, 900 mm, 1200 mm, and 1500 mm lengths with the same 90 × 74 mm profile. Specifying all four sizes together simplifies reordering and reduces SKUs your warehouse holds.

Voltage compatibility. — The A-series accepts 220–240VAC and 110–277VAC wide voltage input, meaning the same SKU works in both 110V and 230V regions. Confirm the voltage option with your sales contact when ordering — the driver is fixed at the factory and cannot be changed in the field.

A-series vs M-series selection. — The A-series is a basic on/off triproof with IP66+IK10 and wide voltage, but no DALI2, no emergency option, and no motion sensor. If your project needs smart control, certified escape lighting, or corridor-mode sensing, choose the ILED-TPR-C M-series instead.

80W / 1500 mm availability. — The 80W / 1500 mm variant is unique to the A-series within the basic triproof range. No other basic triproof (P1 or M-series) offers this wattage. Specify it when high output from a single-tube form factor is required.