RGBW Flood Light DMX DMX512 LED Waterproof

The ILED-FL3 200W DMX is a colour-mixing LED flood light built for architectural and event applications where dynamic RGBW output is essential. Its slim flat-panel housing — 379×420×65 mm — couples a 115° beam angle with approximately 26,000 lm output (130 lm/W) to deliver wide-area colour wash lighting from a low-profile form factor. The die-cast aluminium body and tempered glass front carry an IP66 rating for sustained outdoor exposure, and universal 110–277VAC input supports compatibility across global markets.

Tech specs

• Model: ILED-FL3 200W DMX
• Wattage: 200W
• Luminous efficacy: 130 lm/W
• Housing dimensions: 379×420×65 mm (slim flat panel)
• LED source: RGBW LEDs (Red/Green/Blue+White)
• Beam angle: 115°, wide downward distribution
• Color temperature: 2800K–6500K (white channel)
• CRI: >80 standard, >70 available on request
• Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
• Power factor: >0.9
• IP rating: IP66 — dust-tight, protected against powerful water jets
• Body & finish: Die-cast aluminium housing with tempered glass front, black powder-coat
• Control: DMX512 — precise colour and intensity adjustment
• Mounting: Bracket-compatible for pole, truss, or wall suspension
• Certifications: CE, RoHS, SAA
• Warranty: 5 years

RGBW colour mixing for dynamic wash lighting

The FL3 200W DMX uses dedicated Red, Green, Blue and White LED channels to produce a full spectrum of colours and colour temperatures. Unlike single-channel white flood lights, the RGBW array allows operators to programme precise colour scenes, fade between temperatures, or mix custom hues for facade illumination, stage events and architectural highlighting. The white channel also functions as a standard warm-to-cool white source when colour effects are not required, making the FL3 a practical single-fixture solution for venues that need both static white and dynamic colour output.

DMX512 control provides 16-bit resolution for each colour channel, which means smooth gradients and accurate colour reproduction even at low intensity levels. This level of control is important for architectural applications where abrupt colour shifts or visible banding would detract from the appearance of the illuminated surface. The FL3 200W DMX integrates with standard DMX controllers and lighting desks, allowing it to be synced with other DMX-compatible fixtures in a larger show or installation.

Slim 65 mm profile for concealed or tight-mount installations

At just 65 mm deep, the FL3 200W DMX has one of the lowest profiles among high-power flood lights in the ILED range. This slim form factor is advantageous for applications where the fixture must sit close to the mounting surface — behind soffits, within recessed housings, or on narrow truss members where a deeper unit would protrude visibly. The flat-panel design also presents a clean, minimal silhouette when installed on building facades, making it suitable for daytime aesthetic requirements as well as nighttime illumination performance.

The 115° beam angle complements the slim housing by providing wide-area coverage from a low mounting position. At typical installation heights of 5–12 m, the 115° spread creates a soft, even wash over façades, bridges and open plaza surfaces. Combined with the IP66 seal, the FL3 200W DMX is built to withstand rain, wind-driven spray and dust accumulation in exposed outdoor locations without loss of optical performance.

Why do buyers pick the ILED-FL3 200W DMX over other RGBW flood lights? Here is what we hear from customers:

RGBW colour mixing — one fixture for white and colour wash. The FL3 200W DMX combines Red, Green, Blue and White LED channels in one housing. It delivers warm-to-cool white light for everyday use and full-colour output for events — no fixture swap needed.

130 lm/W at 200W — high output from a slim 65 mm panel. The FL3 produces approximately 26,000 lm from a unit only 65 mm deep. This luminous density allows wide colour wash coverage from low mounting positions where deeper reflector fixtures would need higher towers.

DMX512 control — precise colour programming. Built-in DMX512 provides 16-bit resolution per channel for smooth fades and accurate colour matching. The FL3 integrates with standard lighting desks and can sync with other DMX fixtures without a separate controller.

IP66 rating — stronger sealing than IP65 flood lights. IP66 resists powerful water jets, making the FL3 suitable for coastal sites, uncovered facades and heavy rain locations where IP65 fixtures may degrade faster.

Architectural façade illumination. — The primary use case. The FL3 200W DMX’s RGBW output and 115° beam create even colour washes over building fronts, columns and entrance features. The slim 65 mm profile sits close to the mounting surface, minimising visual intrusion during daytime while delivering rich colour at night.

Event and stage lighting. — Concerts, corporate events and temporary installations use the FL3 200W DMX for programmable colour wash and accent lighting. DMX512 control allows synchronization with other stage fixtures, and the IP66 rating permits outdoor event use without additional weather protection.

Retail and commercial signage. — Brand-colour wash lighting for shop fronts, display windows and commercial signage benefits from the FL3’s accurate CRI80 colour rendering and full-spectrum RGBW output. Colour scenes can be programmed to match brand guidelines and changed seasonally or for promotions.

Bridge and structure highlighting. — Bridge undersides, railway arches and industrial structures use the FL3 200W DMX for safety illumination and aesthetic accent lighting. The IP66 seal resists moisture accumulation and the tempered glass front withstands vibration and debris impact in transport environments.

Parking structures and transport hubs. — Airport aprons, railway yards and multi-storey car parks use the FL3 for area lighting with colour-coding capabilities. Different zones can be illuminated in distinct colours for wayfinding, security marking or aesthetic enhancement.

DMX controller. — The FL3 200W DMX requires an external DMX512 controller. It does not include one. Confirm controller availability before ordering.

Colour vs white mode. — If the application needs only static white light, a non-DMX white flood light may be more cost-effective. Choose the FL3 when colour programming is part of the design.

Mounting height. — The 115° beam is optimised for mounting between 3 m and 10 m. At greater heights the wash becomes diffuse; at lower heights edge intensity may be uneven. Confirm throw distance before ordering.

IP66 vs IP65. — The FL3’s IP66 seal is rated for powerful water jets. For fully enclosed indoor installations, IP65-rated fixtures may be sufficient and lower-cost.

Tempered glass front. — The FL3 uses a tempered glass front panel, which offers superior impact resistance compared to polycarbonate. Recommended for high-traffic or debris-prone locations.