The ILED-BH-016 C is a square outdoor and indoor wall sconce that throws light both up and down the wall in one fixture. It is built to sit on an exterior wall, a porch wall or a feature wall inside, and to give the wall around it an even band of light. The fixture is an aluminum body with a tempered glass front, sealed to IP54, and it uses two 3W COB sources for a wide, even beam. It is available in a white or black body and a range of colour temperatures.
Aperçu des caractéristiques techniques
The fixture is a square wall sconce with two 3W COB sources, for a total of 6W, and a wide 120 degree beam. It covers 2800K to 6500K, with a CRI above 80. The body is aluminum with a tempered glass front, sealed to IP54, and it runs on a 120VAC or 220 to 240VAC supply. It comes in white or black and is a Class I fixture, certified to SAA, CE and RoHS.
Up and down in one fixture
Most wall sconces light one direction. This one splits the light, sending a band up the wall and a band down, so it brightens the surface on both sides of the fixture at once. That is what you want on a feature wall, an entry wall or a garden wall, where you want the whole face lit evenly rather than just above or just below the fitting.
The adjustable lens
The lens is designed to be adjusted, so you can change the shape and spread of the light to suit the spot it is in. On a wide face you open it up for an even band, and in a tighter space you can narrow the throw so the light lands where you want it. The idea is that the same fixture can be shaped for the wall it is on, rather than forcing the wall to suit a fixed beam.
IP54 rating
The IP54 seal keeps the fixture protected from dust and from water thrown at it from a direction, which is what you want on a covered outdoor wall or near an interior opening. It is a sheltered-outdoor and indoor rating, not a submersion rating, so keep it clear of a direct downpour or a place where standing water collects on it.
Choisir le blanc
The fixture covers 2800K to 6500K, so you pick the temperature to suit the space. A warm white suits a home exterior and a cosy entry. A neutral white is the everyday all-round choice, and a cooler white reads brighter and cleaner on a modern facade or a shop. Keep it consistent where you use several in a row.
Fabrication et matériaux
The body is aluminum, which is light, weather-resistant and sheds the heat the light puts out. The front is a tempered glass panel that spreads the light evenly and holds the lens. It is a Class I fixture, so it needs to be earthed on install. Choose the white or black body to suit the wall it sits on.
Contenu de la boîte
Each unit ships as a single fixture with the aluminum body, the tempered glass front and the adjustable lens. You choose the body colour and the colour temperature when you order it.
Ce que vous devez fournir
You will need to wire it to a 120VAC or 220 to 240VAC supply, matching the version you ordered. Because it is a Class I fixture, the installation needs an earth. For dimming, check the fixture is marked dimmable and use a compatible LED dimmer.
Où est-il utilisé ?
Because it lights the wall on both sides, it suits entries and porches under a roof, feature and garden walls, shop fronts and office exteriors, and indoor feature walls. The up-and-down throw makes it the pick where you want a whole face lit evenly, and the two body colours mean it blends in or stands out as the design wants.
Durée de vie et fiabilité
It draws only 6W, so it is a light, efficient fixture that stays cool. The aluminum body handles the heat without a fan, and the IP54 seal keeps dust and thrown water out, so it is built to stay on the wall for years. The tempered glass front keeps the inside dry, and the 120 degree beam keeps the light even across the face it throws onto.
