The ILED-FR5 is the two-ball floor lamp: an iron stem in gold brass, 165cm tall, carrying two glass ball lights with the LEDs built in — one set higher, one lower — so the corner reads as a composition of light rather than a lamp with a shade. It is the decorative piece for the 8 to 15 square meter living rooms, and the integrated LEDs mean there is nothing to buy, store or change for the life of the fitting.
The two balls
The two glass balls sit at different heights on the stem, and that separation is the design: the lower ball carries the corner glow, the upper one reads over the sofa line, and together they look like a sculpture with the light inside it. Each ball runs an integrated 5W LED — 10 watts for the pair — which is accent and atmosphere brightness for a living-room corner rather than a work-light output. The glass diffuses the LED points into one warm sphere per ball, so the light reads clean from any angle in the room. The two heights also do different jobs: the lower ball lights the floor edge and the furniture, the upper one lifts the corner above the sofa line — which is why the composition holds the corner in a way a single-ball lamp does not.
Gold brass on iron
The stem and the frame are iron, finished gold brass — the warm metallic that suits the velvet, the dark wood and the cream walls. At 165cm this is the tallest floor lamp in the range, and the footprint is the corner-sized one that fits beside the sofa without crowding it. The gold brass is the single finish the range runs, and it is the finish that suits the hospitality interiors and the warm residential schemes.
Integrated LEDs
The LEDs are built into the ball lights, so there are no bulbs to buy, no spares to store and no ladder climbs when a light fails. The trade-off is honest: the sources are part of the fitting, so the whole lamp is the warranty item rather than a bulb. For a decorative corner piece that runs its evening hours on a switch, that trade is the reason the fixture is this clean.
Installation and care
The lamp assembles from the base, the stem and the two ball lights, and it plugs into the nearest wall socket — no wiring and no electrician. The iron stem and the glass balls wipe with a dry cloth. The lamp is a dry indoor decorative fitting; it is not a bathroom or outdoor product. The assembly is the same three-part procedure the range follows — base, stem, ball lights — and the whole job runs from the nearest wall socket, which is why the lamp moves between rooms as the furniture does.
Où est-il utilisé ?
Living-room corners and sofa ends, where the two-ball composition is the piece the corner was missing. Bedrooms and dressing areas, where the gold brass matches the warm linens. Hotel lounges and reception areas, where the design read matters as much as the light. And the retail and display corners, where the composition draws the eye and the LED sources run without a maintenance cycle.
Positioning the composition
Two decisions shape the placement: the corner against the 165cm frame and its footprint, and the socket against where the plug lands. The two balls read best where the eye passes them at seated height — beside the sofa, at the end of the reading corner, in the entrance sight line — and the stem stands where the furniture leaves room. Plan the socket position at the same time as the corner, because the composition is fixed once the base is set, and the lead reaches the supply rather than the other way round.
