LED Gas Station Lighting for Industrial Surface or Pendant Lighting with 100W 150W 200W 240W

The ILED-GS2 is a square LED canopy light designed for gas station fuel islands, parking structures and industrial ceilings where high-output, weather-resistant illumination is required. Its low-profile die-cast aluminium housing — just 67 mm deep — mounts flush to the underside of canopy ceilings, minimizing visual bulk while projecting a wide 120° beam downward. The GS2 is offered in four wattage tiers, 100W through 240W, with the two larger variants sharing a 540×540 mm housing and the two smaller variants using a 420×420 mm footprint. Both sizes are available with DALI dimming for daylight-harvesting and occupancy-based control strategies.

Tech specs

• Model variants: ILED-GS2 100W, ILED-GS2 150W, ILED-GS2 200W, ILED-GS2 240W
• Wattage & lumen output: 100W/12,000 lm, 150W/18,000 lm, 200W/24,000 lm, 240W/28,800 lm — all at 120 lm/W
• Housing dimensions: 420×420×67 mm (100W/150W), 540×540×67 mm (200W/240W)
• LED source: Lumileds 3030 SMD LEDs
• Beam angle: 120°, uniform downward distribution
• Color temperature: 2800K–6500K (fixed or selectable)
• CRI: >82
• Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
• Power factor: >0.9
• IP rating: IP65 — fully dust-tight, protected against water jets
• IK rating: IK10 — rated for 20 J impact energy
• Control options: Non-dimmable standard; DALI available on request
• Body & finish: Die-cast aluminium housing, white powder-coat
• Mounting: Surface-mounted or rod-pendant
• Certifications: CE, RoHS, SAA
• Warranty: 3–5 years

Rugged housing for harsh environments

The GS2 uses a die-cast aluminium housing with a white powder-coat finish, providing structural rigidity and corrosion resistance in outdoor and semi-outdoor environments. The IP65 seal prevents dust ingress and protects against water jets from any direction — essential for fuel island canopies exposed to rain, car wash runoff and cleaning chemicals. The IK10 impact rating means the polycarbonate diffuser can withstand accidental impacts from maintenance equipment, shopping trolleys or debris without cracking or shattering.

The 67 mm housing depth is notably slim for a 100–240W canopy light, allowing it to sit flush beneath canopy soffit panels without protruding into the visual field. The square 420×420 mm or 540×540 mm footprint matches standard canopy ceiling tile layouts, simplifying retrofits where existing wiring patterns must be preserved.

Wide voltage and optional DALI control

The GS2 accepts 110–277VAC input, making it suitable for markets with either 110V (North America) or 220–240V (Europe, Asia, Australia) supply without requiring a transformer or voltage converter. This wide-voltage design also provides tolerance for supply voltage fluctuations common at outdoor fuel islands where long cable runs cause voltage drop.

DALI-enabled variants support stepless dimming and scene control through a DALI bus, integrating with building management systems or standalone daylight sensors. In canopy applications, DALI control allows the lights to dim when natural daylight is sufficient, reducing energy consumption during midday hours. Multiple GS2 units can be addressed individually or grouped by zone for coordinated dimming across a full fuel island.

The Lumileds 3030 LED engine delivers consistent colour stability and lumen maintenance across the full 100W to 240W range. CRI above 82 ensures accurate colour rendering for vehicle paint, product packaging and signage under the canopy. The 120° beam angle provides wide, uniform coverage that minimises dark spots between adjacent fixtures, creating even illumination across the entire fuel island or parking bay.

Why do buyers pick the ILED-GS2 over other canopy lights? Here is what we hear from customers:

IK10 impact rating — built for busy fuel islands. Canopy lights at gas stations are subject to impacts from vehicle mirrors, loading equipment and cleaning tools. The GS2’s IK10-rated polycarbonate diffuser and die-cast aluminium housing withstand repeated impacts that would crack or deform lesser fixtures, reducing replacement costs in high-traffic locations.

120 lm/W across all four wattage tiers. Every GS2 model — from 100W to 240W — delivers the same 120 lm/W efficacy. There is no efficiency penalty for choosing a higher wattage variant; the 240W model produces 28,800 lm without sacrificing luminous efficacy, making whole-station retrofits straightforward to specify.

110–277VAC wide voltage — one SKU for global projects. The dual-range input means the same GS2 unit can be specified for sites in North America (110–120V), Europe (220–240V) or anywhere in between, without stock splitting between regional variants. This simplifies procurement and reduces spare-part inventory for multi-site operators.

Gas station fuel island canopies. — The primary application. The GS2’s IP65 seal and IK10 impact rating withstand rain, car wash runoff and frequent contact from vehicle mirrors and pump hoses. The 120° beam angle covers multiple fuel bays from a single fixture, reducing the total unit count needed.

Parking structure canopies and car ports. — Covered parking areas benefit from the GS2’s wide voltage input, which tolerates voltage drop along long canopy runs. The white powder-coat finish blends with most architectural cladding, and the low 67 mm profile keeps visual mass minimal beneath structural beams.

Industrial service bays and maintenance sheds. — Workshops and vehicle service areas require durable, high-output lighting that survives tool drops and chemical exposure. The GS2’s die-cast aluminium housing and IK10 diffuser resist both physical impacts and corrosive cleaning agents.

Retail forecourt and drive-through canopies. — Supermarket and convenience store forecourts use the GS2 to illuminate car parks and drive-through lanes. The >82 CRI renders product colours accurately, while the 2800K–6500K range lets operators match existing lighting aesthetics during phased replacements.

Warehouse and logistics dock canopies. — Loading bay canopies need bright, uniform illumination for safe operations and security camera visibility. The GS2’s 120 lm/W efficacy delivers high foot-candle levels at low power, and DALI-controlled zones can dim during off-peak hours.

Mounting method confirmation. — The GS2 supports surface mounting (flush to soffit) and rod-pendant suspension. Confirm the mounting style at order — the bracket is factory-fixed. For canopies over 3 m high, pendant mounting reduces driver glare.

Wattage vs coverage area. — The 100W/150W variants (420×420 mm) suit individual fuel bays. The 200W/240W variants (540×540 mm) cover larger spans. Match the wattage to the canopy height and required foot-candle level.

DALI option requirement. — DALI is an optional factory upgrade, not a field-installable add-on. If daylight harvesting or central dimming is required, specify the DALI variant at order. Standard GS2 units are non-dimmable.

Wide voltage site verification. — The GS2 accepts 110–277VAC input, covering both North American (110–120V) and European (220–240V) supply standards. Confirm the local supply voltage — remote canopy points with low voltage may require a dedicated circuit.

GS2 vs GS1 selection. — The GS2 offers higher wattage (100–240W), a slimmer 67 mm profile and optional DALI. The GS1 is limited to 40–80W with a deeper housing and no DALI. Choose GS2 for new fuel island builds and retrofits.