1000W LED Flood Light | Tower Waterproof IP65 High Bay Sport Lighting

The ILED-FL9 1000W is a high-output LED flood light engineered for tower hanging and sport tunnel installations where large-area, uniform illumination is essential. Its round reflector housing — φ645×380 mm — couples a 120° beam angle with approximately 120,000 lm output (120 lm/W) to deliver even ground coverage from raised mounting positions. The die-cast aluminium body and tempered glass front carry an IP65 rating for sustained outdoor exposure, and universal 110–277VAC input supports compatibility across global markets, including North American and European regions.

Tech specs

• Model: ILED-FL9 1000W
• Wattage: 1000W
• Luminous efficacy: 120 lm/W
• Housing dimensions: φ645×380 mm (round reflector)
• LED source: Lumileds LM80 LEDs
• Beam angle: 120°, wide downward distribution
• Color temperature: 2800K–6500K (3CCT selectable)
• CRI: >70 standard, >80 available on request
• Input voltage: 220–240VAC / 110–277VAC dual-range (wide voltage)
• Power factor: >0.9
• IP rating: IP65 — fully dust-tight, protected against water jets
• Body & finish: Die-cast aluminium housing with tempered glass front, black powder-coat
• Driver: Integral non-dimmable driver
• Mounting: Bracket-compatible for pole, arm, or tower suspension
• Certifications: CE, RoHS, SAA
• Warranty: 3–5 years

120° beam for raised tower mounting

The FL9 1000W’s 120° beam angle is specifically suited to tower-hung and sport tunnel installations where the fixture is mounted several metres above the ground. At typical mounting heights of 10–20 m, the 120° spread covers a wide elliptical area with minimal edge falloff, reducing the number of fixtures needed compared to narrower-beam alternatives. This makes the FL9 1000W efficient for football pitches, athletics stadiums, parking arenas and large industrial yards where uniform illuminance across extensive floor areas is a priority.

The round reflector housing projects light symmetrically in all horizontal directions, which is advantageous when the fixture orientation relative to the target area may vary during installation. Unlike rectangular flood lights that favour one axis, the FL9 1000W delivers even coverage regardless of how the mounting bracket is rotated on the pole or truss. This symmetrical pattern is particularly valuable for circular or irregularly shaped sports venues where rectangular beams would create uneven illuminance zones across the playing surface.

Rugged housing for harsh outdoor environments

The FL9 1000W uses a die-cast aluminium housing with a black powder-coat finish, providing structural rigidity and corrosion resistance in exposed outdoor locations. The IP65 seal protects the internal LED array and driver from dust ingress and water jets from any direction — essential for tower-mounted fixtures subjected to rain, wind-driven spray and seasonal temperature cycling. The tempered glass front panel resists impact from debris, maintenance tools and accidental contact far better than standard polycarbonate diffusers.

The universal 110–277VAC input means the same FL9 1000W unit can be specified for sites in North America (110–120V), Europe (220–240V) or anywhere in between, without requiring a step-down transformer. This wide-voltage tolerance also accommodates the voltage drop that commonly occurs along long cable runs from the main distribution board to distant tower mounts, allowing reliable startup even at the far end of the circuit.

Why do buyers pick the ILED-FL9 1000W over other high-power flood lights? Here is what we hear from customers:

120° beam angle — fewer fixtures for large stadiums and arenas. The FL9 1000W’s wide 120° spread covers more ground per fixture than narrow-beam competitors, which means fewer towers or mounting points are needed to achieve the illuminance target on a full-size sports field. This reduces both material and labour costs on stadiums and industrial lighting projects.

120 lm/W efficacy at 1000W — maximum output per watt. Every FL9 1000W unit delivers the same 120 lm/W luminous efficacy, producing approximately 120,000 lm from a single 1000W fixture. This high efficacy keeps operating costs low even at the upper end of the flood light wattage range, where energy consumption is the largest recurring expense.

110–277VAC wide voltage — one SKU for global deployments. The dual-range input means the same FL9 1000W unit works on 110V North American grids and 220–240V European grids without voltage conversion. For contractors supplying multiple stadium or industrial sites across regions, this eliminates stocking separate regional variants and simplifies spare-part logistics.

Stadiums and sports fields. — The primary application. The FL9 1000W’s 120° beam and 120,000 lm output cover football pitches, athletics stadiums and large sports complexes from tower-mounted positions, delivering uniform illuminance across the playing surface with minimal fixture count.

Industrial sites and warehouses. — Large-span factories, distribution centres and aircraft hangars use the FL9 1000W for high-bay yard lighting. The IP65-rated housing withstands dust, oil mist and temperature swings common in industrial outdoor areas.

Architectural façade and landmark lighting. — Building exteriors, bridge undersides and public monuments are illuminated by aiming the FL9 1000W upward or at an angle. The 120° spread creates a soft, even wash suitable for general façade highlighting rather than precise accent work.

Parking structures and transport hubs. — Airport aprons, railway yards and multi-storey car parks require bright, wide-area coverage. The FL9 1000W’s wide voltage input handles voltage drop along long cable runs from central distribution boards to distant tower mounts.

Perimeter and security lighting. — Industrial site boundaries, utility compounds and construction perimeters use the FL9 1000W for continuous overnight illumination. The IP65 seal and tempered glass front resist vandalism and weather exposure in unattended outdoor locations.

Mounting height. — The 120° beam is optimised for tower mounts between 10 m and 20 m above ground. At lower mounts the spill extends too far; at greater heights the illuminance drops. Confirm the mounting height before ordering.

CRI selection. — Standard CRI70 is adequate for sports and industrial use. If the flood light will be used for broadcast venues, retail facades or architectural accent lighting, specify CRI80 at order — it is not a field-changeable upgrade.

DALI availability. — DALI is not confirmed as a standard feature for the FL9 1000W. If daylight harvesting or remote dimming is required, contact the sales team before ordering to confirm whether a DALI variant exists.

Wide voltage verification. — The FL9 1000W accepts 110–277VAC input, covering both North American (110–120V) and European (220–240V) supply standards. Confirm the local supply voltage — remote tower points with very low voltage may require a dedicated circuit.

Tempered glass front. — The FL9 1000W uses a tempered glass front panel, which offers superior impact resistance compared to polycarbonate. For locations with high debris risk, the glass front is the recommended choice.