The ILED-BP-A B3 is a waterproof outdoor column light for garden and landscape lighting. It is the slim post you set into a path, a lawn border or a garden, and it puts out a clean, even light while keeping the beam down on the ground. That downward focus is the point, because a landscape light should light the walkway, not flood the sky above it. It comes in three sizes and is built to stand out in the open.
Aperçu des caractéristiques techniques
The fixture runs on 220 to 240VAC or 110 to 277VAC and comes in three sizes, 10W, 14W and 20W, at 80 lumen per watt, so the light output is 800, 1120 or 1600 lumen. It uses LumiLEDs, with a CRI above 80 and a colour temperature from 2800K to 6500K. The body is 160mm in diameter and 800mm high as standard, in aluminum with a PC lens, and it is sealed to IP65 with an IK10 impact rating. It is a Class I fixture, certified to SAA, CE and RoHS, with a 3 to 5 year warranty.
The dark-sky design
The light is aimed down, with the full-cutoff or dark-sky cut kept to the path and the ground, so it does not throw a wash of light up into the sky. That is what you want for a garden or a park, where the light is there to light the walkway, and where keeping the light out of the sky is a real concern. It gives the same light on the path with less wasted above it.
Trois tailles, trois luminaires
The range runs 10W, 14W and 20W, each at 80 lumen per watt, so the output steps up to 800, 1120 and 1600 lumen. The 10W is the softer option for a quiet garden path, the 14W is the everyday all-round choice, and the 20W is the pick for a busier walkway or a lawn edge where you want the light to read clearly. They all share the same 160mm body and the standard 800mm height, so a set of them lines up along a run.
IP65 et IK10
The seal is IP65, so it handles rain and spray, which is what a lawn or a path needs. The IK10 rating is the impact side, which is the important one for a post that people and mowers move around. It is built to take a hit, from a hand, a trolley or a low bump, without failing, which is what keeps it going on a busy footpath.
Choisir le blanc
The light runs from 2800K to 6500K, so you match the temperature to the space. A warm 3000K suits a home garden and a quiet path at night, and a cooler white reads brighter and cleaner for a public walkway or a park. Pick the temperature to suit, and keep it consistent along a run so the light does not shift from one post to the next.
Fabrication et matériaux
Le pied est en aluminium et doté d’une lentille en PC, ce qui lui confère légèreté et résistance aux intempéries ; l’aluminium permet en outre de dissiper la chaleur dégagée par la lampe. Il s’agit d’un luminaire de classe I ; il doit donc être mis à la terre lors de l’installation. Choisissez la couleur du corps en fonction du jardin ou du bâtiment à côté duquel il sera installé.
Contenu de la boîte
Each unit ships as a single column light, with the aluminum post, the PC lens and the mounting base. You choose the size, the colour temperature and the body colour when you order it, and the height can be set to your project.
Ce que vous devez fournir
You will need to wire it to a 220 to 240VAC or 110 to 277VAC supply, matching the version you ordered, and secure it on a solid base set into the ground. Because it is a Class I fixture, the install needs an earth. For dimming, check the version is marked dimmable and use a compatible LED dimmer.
Où est-il utilisé ?
As a landscape and garden column light it shows up on pathways and walkways, along a lawn border, and in parks, plazas and commercial grounds where you want to light the path without washing the sky. The dark-sky cut is the reason to pick it where light pollution matters, and the IK10 rating is the reason to pick it where it gets walked or mowed past.
Durée de vie et fiabilité
The LumiLEDs run at 80 lumen per watt with a CRI above 80, which is a sensible efficiency for an outdoor accent. The aluminum body handles the heat without a fan, and the IP65 seal keeps the weather out, so it is built to stay on the path for years. The IK10 impact rating is the added margin for a post that people move around.
