Pecah Kod DMX 512 RGBWW DIN Rail 5 CH

The FEL-CD264 is the 5-channel DMX decoder for the DIN rail: RGBWW output — red, green, blue, warm white and white on five separate channels at 5 amps each — with 4096 grey levels per channel and the DMX512/1990 line landing on the terminal block. It is the decoder for the large-scale panels that wire the DMX on the terminals rather than the RJ45, and the electrical set is identical to the RJ45 sibling in the range.

The five channels

The output is RGBWW — the RGB channels carry the colour mix, and the warm-white and white channels carry the tunable white independently, which is the set the dual-white strips and the colour-plus-white fittings run. The output is constant-voltage PWM at 5 amps per channel, so the strip and the fittings on the far side run at the voltage the supply delivers.

4096 tahap kelabu setiap kanal

Setiap saluran mengurai pada 4096 tahap, iaitu resolusi yang diperlukan untuk perlambatan licin: pudaran berjalan tanpa langkah-langkah yang dipaparkan oleh pengurai 8-bit pada hujung rendah, dan perubahan adegan perlahan terbaca jelas pada kamera. Bahagian Penonjolan memanggilnya perlambatan licin, lembut, dan penguraian 4096-tahap ialah nombor di baliknya.

Terminal block, master or slave

The DMX512/1990 line lands on the terminal block, and the controller runs as master or slave on the line: master for the standalone setups, slave for the desks and the main controllers. The terminal block is the simpler wiring for the panels without the structured cabling — the installer lands the wires directly, and the daisy-chain continues from the block.

Lingkaran kerja

The supply is DC12-24V, and the output power runs 300W at 12V or 600W at 24V — the higher voltage doubles the run the same copper carries. The working temperature is -20°C to +55°C, the dimension is 111×46×66mm and the weight is 135g, so the decoder is the panel-mounted unit the DIN rail carries without a shelf or a bracket.

Di mana ia digunakan

The large-scale architectural installs, where the decoders line up in the distribution boards and the terminal blocks land the DMX per zone. Hotels and façades, where the RGBWW strips run the colour and the tunable white from one decoder per zone. Stage and studio rigs, where the CV strips need the DMX decode on the rail. And the retail and display installations, where the 4096-level decode is what the slow, camera-visible fades need.

Merancang panel

Three decisions shape the order: the decoder count against the strip load per zone, the supply against the 300W-at-12V or 600W-at-24V arithmetic, and the DMX addressing against the zones the desk or the master runs. Count the strip metres per zone, size the supply with the headroom, and number the decoders on the rail — the terminal block carries the line in the order the panel is wired. With those three set, the install is a panel-building exercise rather than a ceiling-void project, and the next contractor reads the layout off the rail.

Membuat pilihan pengurai dalam julat

The DMX decoder family splits by mount and connection: the CD264 is the terminal-block decoder on the DIN rail for the panels that wire the DMX directly; the CD268 is the same 5-channel RGBWW electrical set with the RJ45 socket for the structured-cabling installs; the CD269 series runs 24 and 32 channels for the multi-zone panels; and the CD206-4 is the standalone RGBW decoder with the XLR-3, RJ45 and terminal connections for the rigs. The choice is the mount and the connection the install runs — the 4096-level decode, the 5-amp channels and the master-or-slave logic are the same across the range.

Why do buyers pick the FEL-CD264 over the alternatives? Here is what we hear from customers:

Rel DIN untuk pemasangan berskala besar. Dekoder disusun di papan pengedaran, bukan berselerak di ruang siling — papan yang dilway oleh juruelektrik ialah papan yang ditambat oleh pasukan AV, dan kedua-dua pihak menemui saluran di tempat yang ditinggalkan.

Blok terminal untuk panel tanpa penwayeran tersusun. DMX tiba terus pada blok — penwayeran yang lebih mudah untuk pemasangan yang tidak menjalankan RJ45, dengan rangkaian daisy berterusan daripada blok yang sama.

RGBWW: the colour and the tunable white on one decoder. Five channels at 5 amps each carry the colour mix and the tunable white together, which is the set the dual-white strips and the colour-plus-white fittings run.

4096 aras kelabu setiap saluran. Larutan berjalan tanpa pengurangan langkah yang ditunjukkan oleh pengesat bit 8 pada hujung rendah — perubahan adegan perlahan dibaca bersih dalam kamera, dan penuruman pada hujung rendah adalah tempat pengesat murah gagal.

Master atau hamba. The controller runs standalone as master or joins the desk as slave — the small installs and the big rigs run the same hardware.

The FEL-CD264 is the decoder for the large-scale RGBWW installs that wire the DMX on the terminals: the DIN-rail fitting that sits in the distribution board and drives the colour and the tunable white from the DMX line.

Pencahayaan arkitekturnya dan fasad. The decoders line the distribution boards, the terminal blocks land the DMX per zone, and the RGBWW strips run the colour and the tunable white from one decoder per zone.

Hotel dan perkhidmatanhospitaliti. The dual-white fittings dim and shift on the 4096-level decode, the scene changes read clean on camera, and the DIN rail keeps the decoders in the panel the staff can reach.

Rig panggung dan studio. The CV strips decode as slave to the desk, the 5-channel RGBWW covers the colour and the white separately, and the master mode runs the small rigs without a console.

Pemasangan runcit dan paparan. Decode 4096-level memacu pudar perlahan yang kelihatan dalam kamera yang dijalankan oleh pencahayaan paparan, dan penelesai berskala merentasi lantai di atas rel.

Pemasangan papan pengagregasi. Penelesai disusun dalam panel yang dierjat oleh juruteknik, blok terminal menempatkan baris di mana kabel struktur berhenti, dan susunan panel ialah dokumen yang dibaca oleh kontraktor seterusnya.