| Model NO.: | ILED-DM2 D | Zones | 3 Zone |
| Function | Dimmable and RGBW | Input Voltage | 12-24V DC |
| Input Terminal | DC2.1 and Screw terminal | Output | 4A*4CH |
| Max Power Load | 12V=144W, 24V=288W | Dimming | 0-100% |
| Remoter Frequency | RF 2.4GHz or Push Dim | Operate Temp. | -30°C – +55°C |
| Receiver Dimension | L85*W45*H23mm | Receiver Weight | 45g |
| Remoter Dimension | L150*W40*H13mm | Remoter Weight | 60g |
| Packaging | Colorful Box or Skin Packing, any OEM can be supported. | ||
RGBW Controller Dimmer 12-24V LED with 2.4G Remoter 4 Channels 3 Zone ILED-DM2 D
The ILED-DM2 D is a 4-channel RGBW controller for 12V-24V LED strips, driving up to 3 zones. It runs red, green, blue, and white on four channels, so each zone mixes colour and a white. Output is 4A per channel, up to 144W at 12V or 288W at 24V. It is driven by a 2.4G remote or the push buttons, 0-100% dimming, no app, no pairing. It works from -30 to +55C. It suits RGBW strips that want colour plus white across up to 3 zones.
Key Highlights
- RF 2.4G
- 12VDC 24VDC
- 3 Zones
- Dimmable and RGBW
- Stable and Flicker Free
- Easy Connection
Category: Dimmer and Controller , Strip and Module Lights
The ILED-DM2 D is a 4-channel RGBW controller for 12V and 24V LED strips, driving up to 3 zones. It runs red, green, blue, and white on four channels, so each zone mixes colour and a white. It is driven by a 2.4G remote or the push buttons, with no app and no pairing. It suits RGBW strips that want colour scenes and a clean white.
4 channels, RGBW
Four channels: red, green, blue, and a white. The three colour channels mix to any hue, and the white channel is a real white, not a colour mix, so it stays clean. An RGB-only controller makes white by blending the colours, and that reads a little grey. The dedicated white channel keeps the white true, which is the main step up from the colour-only DM2 C.
3 zones
Three zones means three independent areas, each running its own RGBW mix on the four channels. Zone 1 can hold a warm white, zone 2 a colour wash, and zone 3 off, all from the one controller. Each zone reuses the four channel addresses, so you set the colour and level per zone. It suits a house where three areas need different looks.
How it works
The 2.4G remote sends over radio, not over cables. Each channel has its own address, so the colour and the white are set independently, and each of the 3 zones holds its own mix. The remote is RF 2.4GHz, so no line of sight is needed. The receiver and remote keep their settings through a power cut, and the push buttons do the same jobs. Power it up and it runs.
Output and dimming
Each of the four channels is rated at 4A, so the controller drives up to 144W at 12V or 288W at 24V. Dimming runs from 0 to 100%, and the fade is smooth. At low levels the strip holds a clean setting without flicker. The output is a DC2.1 plus a screw terminal. For a long strip, run a separate supply and use this for the signal.
Power and connection
Feed the controller from a DC2.1 plug or the screw terminal, on a 12V to 24V DC supply. Size the power supply to the strip, and do not exceed 4A on a channel. Wire the colour and white lines to their own channels and share the ground. Each of the 3 zones reuses the same four lines.
Receiver and remote
The receiver is L85 by W45 by H23mm, 45g. The remote is L150 by W40 by H13mm, 60g, and fits in one hand, with buttons for the colour, the white, the dimming, and each zone. The receiver bolts to a desk or a wall. It ships in a colorful box or skin pack, and OEM packaging is supported.
Temperature and use sites
It is rated from -30C to +55C, covering most indoor and sheltered outdoor use. Keep it out of the direct sun for an outdoor install. The 2.4G signal needs a clear path or a short cable. The flicker-free output suits camera work and retail displays. Use it where you want colour plus a white across a few zones.
Where it sits in the DM2 family
The DM2 D is the RGBW controller. The DM2 A is single color, the DM2 B is a CCT dual white, the DM2 C is colour-only RGB, the DM2 D is RGBW, and the DM2 E adds a second white channel. If you need full RGB plus one white, the DM2 D is the right one. Where you want a warm and a cool white, step up to the DM2 E.
What is in the box
Each order ships one ILED-DM2 D receiver and one 2.4G remote, in a colorful box or skin pack. It has a DC2.1 input and screw terminals for the 4 channels, plus the push buttons. No cables or power supply are included. Add a 12V or 24V supply and an RGBW strip.
What you need to supply
A 12V or 24V power supply sized to the strip. An RGBW strip within the 4A per channel limit. A mount for the receiver, and a clear path for the remote. The remote battery comes with the unit. Do not exceed 4A on a channel.
Where it gets used
Use the ILED-DM2 D on RGBW strip runs: coves and feature walls that want a colour wash, a white reading light, and a mixed look, each in its own zone. It suits retail, hospitality, and home coves where one controller handles three areas. For a colour-only strip, the DM2 C is enough; for a dual white, the DM2 E.
Why choose the ILED-DM2 D.
It is the four-channel RGBW controller, so you get red, green, and blue plus a dedicated white channel, and you can drive up to 3 zones from one unit. The white channel is the point: it is a real white, not the muddy mix an RGB-only controller makes. Each channel is 4A, so it drives up to 144W at 12V or 288W at 24V. The 2.4G remote sets the colour, the white, and the dimming for each zone with no app and no pairing, and the push buttons cover it if the remote goes missing. It draws a steady 0 to 100%, holds a clean low level, and does not flicker. It is small, 45g, and bolts to a wall, and it works from -30 to +55C. It is the RGBW step up from the colour-only DM2 C. If you want colour plus a white across a few zones, this is the controller.
What is the difference between RGB and RGBW?
RGB gives red, green, blue, and makes white by mixing all three, which reads a little grey. RGBW adds a dedicated white channel, so the white is clean and bright, and you can use colour, white, or a mix of both. Pick RGB where you only want colour. Pick RGBW, this one, where you also want a proper white. The white channel and the colour channels are all driven from the 2.4G remote.
How many channels and zones does it have?
Four channels: red, green, blue, and white. And it drives up to 3 zones, each running its own RGBW mix. That means one controller can hold three different looks: a warm white in one area, a colour wash in another, and off in a third. It is the step up from the colour-only DM2 C, which has no white channel.
Will it flicker at low brightness?
No. The output is rated flicker-free, and the fade is smooth across 0 to 100%. Even a low hold is clean, so it works for camera work and product photos. If you dim a long strip, keep the power supply close so the last section holds its level.
Do I need to pair the remote?
No. The remote is RF 2.4GHz and talks to the receiver directly, no code and no app. The settings stay when power is cut, so it is not reset when the breaker trips. Use the push buttons on the receiver if the remote is lost.
How much current does each channel carry?
Each of the four channels is rated at 4A. Together the controller drives up to 144W at 12V or 288W at 24V. Do not exceed 4A on one channel; split a long run across it. Size the power supply to the strip.
Put the ILED-DM2 D on RGBW strip runs where you want colour and a white in the same system: coves and feature walls, display cases, home reading nooks, and hospitality lobbies. The four channels mix a colour wash or a clean white, and the 3 zones let one controller handle three areas, so the lounge stays warm white while the accent cove runs a colour. The dedicated white channel gives a true white instead of the muddy RGB mix, which matters where the white is used for everyday lighting. The flicker-free fade suits product and camera work. Where you only need colour, the DM2 C is enough, and where you also want a warm and a cool white, that is the DM2 E. The DM2 D is the colour-plus-white choice for up to three zones, and the 2.4G remote keeps the whole run off a phone. For a reading nook that wants a soft white and an accent cove that wants a colour, run the white on the first zone and the colour wash on the second, and switch them independently without a controller box. Where the room only needs a plain white, the CCT or single-color siblings are simpler.
Buy the ILED-DM2 D in its 4-channel RGBW, 3-zone form: 4A per channel, up to 144W at 12V or 288W at 24V, 0 to 100% dimming, a 2.4G remote plus push buttons, and a -30 to +55C rating. The receiver is L85 by W45 by H23mm, 45g, and the remote is L150 by W40 by H13mm, 60g. It ships in a colorful box or skin pack, and OEM packaging is supported. A matching 12V or 24V power supply is not included, so size one to the strip and keep it under 4A per channel. Check that the strip is a true RGBW with the white line separate, so the white channel works as intended. It is the RGBW step up from the colour-only DM2 C, and one step below the RGB+CCT DM2 E. Confirm the remote fits in hand for the install, since it is the only way to set the mix after the strip is up. If you want colour plus a white across three zones, this is the one.
Customer Reviews
"iLed provides suitalbe dimmer and controller for their strip LED tape lights to us. They are working flow, stable, not flicker."
"Compare with other suppliers, we prefer to the controllers for RGB and RGBW LED Strip Lights from iLed. They don’t have flicker and stable."
"iLed’s RGB or RGBW DMX decorders helped us much because of their easy using, strong functions and perfect compatibility."
"The guys of iLed are always patient and professional for us to solve all kinds of controller operation and using. We are now completely familiar with their dimmers, controllers, decoders. We can also quickly respond to customer projects and win projects."
"iLed is always able to quickly and professionally recommend the most suitable control system according to the requirements of our customers’ projects."
"iLed remommend their RGB controller for RGB COB LED strip lights, they both work well together.Their dual color,RGB or RGBW controllers can be a group by one remoter."
"iLed provides suitalbe dimmer and controller for their strip LED tape lights to us. They are working flow, stable, not flicker."
"Compare with other suppliers, we prefer to the controllers for RGB and RGBW LED Strip Lights from iLed. They don’t have flicker and stable."
"iLed’s RGB or RGBW DMX decorders helped us much because of their easy using, strong functions and perfect compatibility."
"The guys of iLed are always patient and professional for us to solve all kinds of controller operation and using. We are now completely familiar with their dimmers, controllers, decoders. We can also quickly respond to customer projects and win projects."
"iLed is always able to quickly and professionally recommend the most suitable control system according to the requirements of our customers’ projects."
"iLed remommend their RGB controller for RGB COB LED strip lights, they both work well together.Their dual color,RGB or RGBW controllers can be a group by one remoter."
"iLed provides suitalbe dimmer and controller for their strip LED tape lights to us. They are working flow, stable, not flicker."
"Compare with other suppliers, we prefer to the controllers for RGB and RGBW LED Strip Lights from iLed. They don’t have flicker and stable."
"iLed’s RGB or RGBW DMX decorders helped us much because of their easy using, strong functions and perfect compatibility."
"The guys of iLed are always patient and professional for us to solve all kinds of controller operation and using. We are now completely familiar with their dimmers, controllers, decoders. We can also quickly respond to customer projects and win projects."
"iLed is always able to quickly and professionally recommend the most suitable control system according to the requirements of our customers’ projects."
"iLed remommend their RGB controller for RGB COB LED strip lights, they both work well together.Their dual color,RGB or RGBW controllers can be a group by one remoter."
Related Products
Mini Neon LED Lights 4mmx10mm CRI90 Side Lighting
LED Neon Light
Touch Dimmer Wall Mounted 84 Panel for LED Strip Lights ILED-DM3 H
Dimmer and Controller
DC 24V SMD 3528 240 piece LED per Meter Flexible LED Strip Light
SMD LED Strip Light
RGBW Controller Dimmer 12-24V LED with 2.4G Remoter 4 Channels ILED-DM1 D
Dimmer and Controller
Need Custom Solutions?
All of our LED lighting solutions can be customised to your needs. We also offer free, no-obligation consultations, prototype development, sample testing and can assist with your development projects.
Simply contact us with your special requirements and our experts will gladly help you find the best solution for your project.

